ImmortalWrt/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch
Olliver Schinagl f1f97db627
realtek: Convert incorrect v5.10 patches
OpenWRT's developer guide prefers having actual patches so they an be
sent upstream more easily.

However, in this case, Adding proper fields also allows for `git am` to
properly function. Some of these patches are quite old, and lack much
traceable history.

This commit tries to rectify that, by digging in the history to find
where and how it was first added.

It is by no means perfect and also shows some patches that should have
been long gone.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2022-10-01 02:47:57 +02:00

47 lines
1.8 KiB
Diff

From f4bdb7fdccdfe3fa382abe77f72a16c2f2e6add0 Mon Sep 17 00:00:00 2001
From: Birger Koblitz <git@birger-koblitz.de>
Date: Sat, 11 Dec 2021 20:25:37 +0100
Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C multiplexing
The RTL9300/RTL9310 I2C controllers have support for 2 independent I2C
masters, each with a fixed SCL pin, that cannot be changed. Each of these
masters can use 8 (RTL9300) or 16 (RTL9310) different pins for SDA.
This multiplexer directly controls the two masters and their shared
IO configuration registers to allow multiplexing between any of these
busses. The two masters cannot be used in parallel as the multiplex
is protected by a standard multiplex lock.
Submitted-by: Birger Koblitz <git@birger-koblitz.de>
---
drivers/i2c/muxes/Kconfig | 9 +++++++
drivers/i2c/muxes/Makefile | 1 +
2 files changed, 10 insertions(+)
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -99,6 +99,15 @@ config I2C_MUX_REG
This driver can also be built as a module. If so, the module
will be called i2c-mux-reg.
+config I2C_MUX_RTL9300
+ tristate "RTL9300 based I2C multiplexer"
+ help
+ If you say yes to this option, support will be included for a
+ RTL9300 based I2C multiplexer.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-reg.
+
config I2C_DEMUX_PINCTRL
tristate "pinctrl-based I2C demultiplexer"
depends on PINCTRL && OF
--- a/drivers/i2c/muxes/Makefile
+++ b/drivers/i2c/muxes/Makefile
@@ -14,5 +14,6 @@ obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux
obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o
+obj-$(CONFIG_I2C_MUX_RTL9300) += i2c-mux-rtl9300.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG