5.5 KiB
5.5 KiB
RV1126 Release Note
rv1126_usbplug_v1.24.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-03-31 | rv1126_usbplug_v1.24.bin | 0744719244 | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | fix OTP chip id write error | if chip id is blank, it will be written rv1126. | - |
rv1126_spl_emmc_tb_v1.13.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-12-09 | rv1126_spl_emmc_tb_v1.13.bin | f3f5db2e27 | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | fix DECOM_ENR is not clear found in v1.12 | if DECOM_ENR is not cleared, rootfs would be decompress failed cause by decom busy status. | - |
rv1126_tee_ta_tb_v1.07.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-12-09 | rv1126_tee_ta_tb_v1.07.bin | 4eb6cbf6c | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - |
rv1126_ddr_{1056 ... 784}MHz_v1.09.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-10-25 | rv1126_ddr_{1056 ... 784}MHz_v1.09.bin | 8fef64cfb9 | critical |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | critical | Fix problem of LPDDR4X MRR error | The judgment logic of LPDDR4X in the MRR function is defective. As a result, the LPDDR4X MRR data may be incorrect. | - |
| 2 | important | Fix error of some LPDDR4 in 528MHz | The code does not consider that the Wr Lvl result of some LPDDR4 may be negative, which may lead to error in the judgment of Wr Lvl result. | 358198 |
| 3 | moderate | Fix timing error of some DDR | The settings of t_xs_x32, t_xs_abort_x32, and t_xs_fast_x32 are incorrect. Some DDR (less than 128M) may fail in other platform. | - |
| 4 | important | Fix some x32 LPDDR3 instability issues | The detection process of LPDDR3 is defective. Part of x32 LPDDR3 is identified as x16, which results in some timing setting errors. | 322844 |
rv1126_tee_ta_v2.08.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-10-24 | rv1126_tee_ta_v2.08.bin | 317f8b06b | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Fix error of fiq stack information | Enter 'bt' command in fiq mode, That will show wrong stack information. | - |
rv1126_tee_ta_v2.07.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-09-16 | rv1126_tee_ta_v2.07.bin | d84087907 | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - |
rv1126_{miniloader, usbplug}_ftl_v1.23.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-09-08 | rv1126_{miniloader, usbplug}_ftl_v1.23.bin | 55a904 | moderate |
New
- Support SPI Nand MX35UF1GE4AD MX35UF2GE4AD.