ath79: add support for Qxwlan E1700AC v2
E1700AC v2 based on Qualcomm/Atheros QCA9563 + QCA9880.
Specification:
- 750/400/250 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 2 x 10/1000M Mbps Ethernet (RJ45)
- 1 x MiniPCI-e
- 1 x SIM (3G/4G)
- 1 x USB 2.0 Port
- 5 x LED , 2 x Button(S8-Reset Buttun), 1 x power input
- UART (J5) header on PCB (115200 8N1)
Flash instruction:
1.Using tftp mode with UART connection and original LEDE image
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
to "firmware.bin" and place it in tftp server directory.
- Connect PC with one of LAN ports, power up the router and press
key "Enter" to access U-Boot CLI.
- Use the following commands to update the device to LEDE:
run lfw
- After that the device will reboot and boot to LEDE.
- Wait until all LEDs stops flashing and use the router.
2.Using httpd mode with Web UI connection and original LEDE image
- Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
- Connect PC with one of LAN ports,press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
leds flashing.
- Open your browser and enter 192.168.1.1,You will see the upgrade
interface, select "openwrt-ar71xx-generic-xxx-squashfs-
sysupgrade.bin" and click the upgrade button.
- After that the device will reboot and boot to LEDE.
- Wait until all LEDs stops flashing and use the router.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
[cut out of bigger patch, keep swconfig, whitespace fixes]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
张鹏
Adrian Schmutzler
parent
987d9028e1
commit
4ff7bdfeeb
16
target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts
Normal file
16
target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts
Normal file
|
|
@ -0,0 +1,16 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca9563_qxwlan_e1700ac.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qxwlan E1700AC v2 16M";
|
||||
compatible = "qxwlan,e1700ac-v2-16m", "qca,qca9563";
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@70000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x070000 0xf90000>;
|
||||
};
|
||||
};
|
||||
16
target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts
Normal file
16
target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts
Normal file
|
|
@ -0,0 +1,16 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca9563_qxwlan_e1700ac.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qxwlan E1700AC v2 8M";
|
||||
compatible = "qxwlan,e1700ac-v2-8m", "qca,qca9563";
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@70000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x070000 0x790000>;
|
||||
};
|
||||
};
|
||||
157
target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi
Normal file
157
target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi
Normal file
|
|
@ -0,0 +1,157 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca956x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
label-mac-device = ð0;
|
||||
led-boot = &led_system;
|
||||
led-failsafe = &led_system;
|
||||
led-running = &led_system;
|
||||
led-upgrade = &led_system;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_system: system {
|
||||
label = "green:system";
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "green:usb";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&hub_port0>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "green:wlan2g";
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x040000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
pridata: partition@50000 {
|
||||
label = "pri-data";
|
||||
reg = <0x050000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@60000 {
|
||||
label = "art";
|
||||
reg = <0x060000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy-mask = <0>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
phy-mode = "sgmii";
|
||||
qca,mib-poll-interval = <500>;
|
||||
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
|
||||
0x7c 0x0000007e /* PORT0_STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
pll-data = <0x03000101 0x00000101 0x00001919>;
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
mtd-mac-address = <&pridata 0x400>;
|
||||
};
|
||||
|
||||
&usb_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
hub_port0: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
};
|
||||
|
|
@ -244,6 +244,8 @@ ath79_setup_interfaces()
|
|||
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
|
||||
;;
|
||||
nec,wg1200cr|\
|
||||
qxwlan,e1700ac-v2-8m|\
|
||||
qxwlan,e1700ac-v2-16m|\
|
||||
qxwlan,e750g-v8-8m|\
|
||||
qxwlan,e750g-v8-16m|\
|
||||
ubnt,nanostation-ac|\
|
||||
|
|
|
|||
|
|
@ -22,6 +22,8 @@ case "$FIRMWARE" in
|
|||
comfast,cf-wr650ac-v1|\
|
||||
comfast,cf-wr650ac-v2|\
|
||||
devolo,magic-2-wifi|\
|
||||
qxwlan,e1700ac-v2-8m|\
|
||||
qxwlan,e1700ac-v2-16m|\
|
||||
ubnt,unifiac-lite|\
|
||||
ubnt,unifiac-lr|\
|
||||
ubnt,unifiac-mesh|\
|
||||
|
|
|
|||
|
|
@ -1475,6 +1475,27 @@ define Device/qihoo_c301
|
|||
endef
|
||||
TARGET_DEVICES += qihoo_c301
|
||||
|
||||
define Device/qxwlan_e1700ac-v2
|
||||
SOC := qca9563
|
||||
DEVICE_VENDOR := Qxwlan
|
||||
DEVICE_MODEL := E1700AC
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
||||
endef
|
||||
|
||||
define Device/qxwlan_e1700ac-v2-16m
|
||||
$(Device/qxwlan_e1700ac-v2)
|
||||
DEVICE_VARIANT := v2 (16M)
|
||||
IMAGE_SIZE := 15936k
|
||||
endef
|
||||
TARGET_DEVICES += qxwlan_e1700ac-v2-16m
|
||||
|
||||
define Device/qxwlan_e1700ac-v2-8m
|
||||
$(Device/qxwlan_e1700ac-v2)
|
||||
DEVICE_VARIANT := v2 (8M)
|
||||
IMAGE_SIZE := 7744k
|
||||
endef
|
||||
TARGET_DEVICES += qxwlan_e1700ac-v2-8m
|
||||
|
||||
define Device/qxwlan_e558-v2
|
||||
SOC := qca9558
|
||||
DEVICE_VENDOR := Qxwlan
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user