Commit Graph

48766 Commits

Author SHA1 Message Date
David Bauer
1aa71833fe tools: add back lzma-old for ath79
lzma-old host package is required for building ath79 images, as
mksquashfs-lzma is required for generating netgear images.

Fixes commit 4e4ee46495 ("ar71xx: drop target")

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-08-31 00:21:18 +02:00
Hannu Nyman
040b625c4b tools/coreutils: update to 8.32
Update coreutils to version 8.32.
Remove upstreamed patch.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-08-30 22:21:34 +02:00
Sven Wegener
6a9c76a6c4 leds: add activity led trigger kernel module package
The activity trigger flashes like the heartbeat trigger, but adjusts
based on system load.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
2020-08-30 22:21:34 +02:00
Hannu Nyman
55b73d6754 kernel: add missing symbol NET_DSA_TAG_RTL4_A
Fix build breakage caused by the missing kernel config symbol.

Fixes: 8735997686 ("kernel: backport RTL8366RB patches")
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-08-30 22:21:34 +02:00
Hauke Mehrtens
4e2a994d2d ethtool: Update to version 5.8
The ipk sizes for mips_24Kc change like this:
old:
ethtool_5.4-1_mips_24kc.ipk	101.909

new:
ethtool_5.8-1_mips_24kc.ipk	109.699

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Hans Dedecker <dedeckeh@gmail.com>
2020-08-30 22:21:34 +02:00
Hauke Mehrtens
0b2f97beed iproute2: Update to version 5.8
The ipk sizes for mips_24Kc change like this:
old:
ip-full_5.7.0-2_mips_24kc.ipk	165.786
ip-tiny_5.7.0-2_mips_24kc.ipk	117.730
tc_5.7.0-2_mips_24kc.ipk	144.405

new:
ip-full_5.8.0-1_mips_24kc.ipk	169.775
ip-tiny_5.8.0-1_mips_24kc.ipk	119.808
tc_5.8.0-1_mips_24kc.ipk	149.053

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-30 22:21:34 +02:00
Hauke Mehrtens
ca5ee6eba3 mac80211: Fix potential endless loop
Backport a fix from kernel 5.8.3.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-30 22:21:34 +02:00
Adrian Schmutzler
d7fb7ac278 ath79: increase kernel partition for ar9344 TP-Link CPE/WBS
The kernel has become too big again for the ar9344-based TP-Link
CPE/WBS devices which still have no firmware-partition splitter.

Current buildbots produce a kernel size of about 2469 kiB, while
the partition is only 2048 kiB (0x200000). Therefore, increase it
to 0x300000 to provide enough room for this and, hopefully, the
next kernel.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-30 22:20:37 +02:00
Adrian Schmutzler
4e4ee46495 ar71xx: drop target
This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-30 22:18:35 +02:00
Aaron Goodman
47b2ee2d9a wireguard-tools: add tunlink option for hostroute
In a multi-wan setup, netifd may need guidance on which wan device to
use to create the route to the remote peer.

This commit adds a 'tunlink' option similar to other tunneling interfaces
such as 6in4, 6rd, gre, etc.

Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
2020-08-30 21:47:13 +02:00
John Audia
05b8e84362 kernel: bump 5.4 to 5.4.61
Manually merged:
  backport-5.4
     011-kbuild-export-SUBARCH.patch
  layerscape
    701-net-0262-net-dsa-ocelot-add-tagger-for-Ocelot-Felix-switches.patch

All other modifications made by update_kernel.sh

Build-tested: x86/64, lantiq/xrx200, ramips/mt7621
Run-tested: ipq806x (R7800), lantiq/xrx200, x86/64, ramips (RT-AC57U)

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[minor commit message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-30 19:44:47 +02:00
Christian Lamparter
f589bd9283 apm821xx: fix typos in .dts files
This patch fixes various typos or tab-vs-space issues in
the APM821XX device targets Device-Tree source files.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-08-29 17:15:09 +02:00
Christian Lamparter
e4c33462f9 apm821xx: use SPDX-License-identifiers
Please note that the DTS are based on really old .DTS from vendors
themselves.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-08-29 17:15:03 +02:00
Christian Lamparter
eb6bb94b12 apm821xx: apm821xx.dtsi fix comment styles
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-08-29 17:14:58 +02:00
Christian Lamparter
4ea5d443db apm821xx: MX60W: enumerate PCIe in device-tree
This patch adds the pcie-switch and bridge configuration for
the Meraki MX60W.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-08-29 17:14:55 +02:00
Christian Lamparter
1640e71e8e apm821xx: WNDR4700: delete wndr4700 board file
Thanks to the PCIE OF enumeration patch, this is technically
no longer needed.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-08-29 17:14:49 +02:00
Christian Lamparter
9153955095 apm821xx: MR24: enumerate PCIe in device-tree
This patch adds the pcie-switch and bridge configuration for
the Meraki MR24.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-08-29 17:14:44 +02:00
Christian Lamparter
b15420fc6c apm821xx: add missing cells-values for IIC1
These are copied over from the IIC0.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-08-29 17:14:42 +02:00
Christian Lamparter
90909ef4ba apm821xx: DTB: fix warnings related to sata-port warnings
This patch silences the following warnings:
>netgear-wndr4700.dts:168.3-13:Warning (reg_format): /plb/sata@bffd1800/sata-port@0:reg:property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
>netgear-wndr4700.dts:167.26-170.4: Warning (avoid_default_addr_size):/plb/sata@bffd1800/sata-port@0: Relying on default #address-cells value
>netgear-wndr4700.dts:167.26-170.4: Warning (avoid_default_addr_size):/plb/sata@bffd1800/sata-port@0: Relying on default #size-cells value

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-08-29 17:14:37 +02:00
Christian Lamparter
0facedb515 apm821xx: WNDAP6x0: enumerate PCIe in device-tree
This patch adds the pcie-switch and bridge configuration of the
WNDAP620 and WNDAP660.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-08-29 17:14:31 +02:00
Christian Lamparter
2c3f16d70e apm821xx: WNDR4700: enumerate PCIe in device-tree
This patch adds the pcie-switch and bridge configuration of the
WNDR4700.

This allows to get rid of the legacy firmware monikers and drop
the usbport LED declaration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-08-29 17:14:27 +02:00
Daniel Golle
d75e753063 oxnas: kd20: revert accedintally commited change
Changing the factory image of KD20 was used during testing and wasn't
intended to be included in the commit fixing a SATA bug on oxnas.
Revert that part of the commit.

Fixes: 5793112f75 ("oxnas: reduce size of ATA DMA descriptor space")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-08-29 01:16:24 +01:00
Daniel González Cabanelas
42d14ace3e mvebu: LS421DE: add linkstation poweroff driver
Compile the Linkstation poweroff module for the Buffalo LS421DE.
Without this driver the device remains forever halted if a power off
command is executed.

The driver will also allow to use the WoL feature, which wasn't availabe
in the stock firmware.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2020-08-28 10:44:29 +01:00
Daniel González Cabanelas
59c200ca0a mvebu: backport linkstation-poweroff upstream driver
Backport the Linkstation poweroff driver from the kernel upstream (commit
a7f79f99541ef)

This driver is required by the Buffalo LinkStation LS421DE for a correct
power off operation. It also allows to use the WoL feature.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2020-08-28 10:44:29 +01:00
Perry Melange
09faa73c53 ramips: rt3883: use lzma-loader for DIR-645
The DIR-645 fails to boot if the kernel is large.
Enabling lzma-loader resolves the issue.

Run-tested on D-Link DIR-645.

Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>
2020-08-28 00:25:34 +02:00
Georgi Vlaev
51b653de94 ramips: add support for Wavlink WL-WN531A6
This patch adds support for Wavlink WL-WN531A6 (Quantum D6).

Specifications:
--------------

* SoC: Mediatek MT7621AT 2C2T, 880MHz
* RAM: 128MB DDR3, Nanya NT5CB64M16GP-EK
* Flash: 16MB SPI NOR flash, GigaDevice GD25Q127CSIG
* WiFi 5GHz: Mediatek MT7615N (4x4:4) on mini PCIE slot.
* WiFi 2.4GHz: Mediatek MT7603EN (2x2:2) on mini PCIE slot.
* Ethernet: MT7630, 5x 1000Base-T
* LED: Power, WAN, LAN(x4), WiFi, WPS, dual color
       "WAVLINK" LED logo on the top cover.
* Buttons: Reset, WPS, "Turbo", touch button on the top
           cover via RH6015C touch sensor.
* UART: UART1: serial console (57600 8n1) on the J4 header
               located below the top heatsink.
        UART2: J12 header, located on the right side of
               the board.
* USB: One USB3 port.
* I2C: J9 header, located below the top heatsink.

Backup the OEM Firmware:
-----------------------

There isn't any firmware released for the WL-WN531A6 on
the Wavlink web site. Reverting back to the OEM firmware is
not possible unless we have a backup of the original OEM
firmware.

The OEM firmware is stored on /dev/mtd4 ("Kernel").

  1) Plug a FAT32 formatted USB flash drive into the USB port.
  2) Navigate to "Setup->USB Storage". Under the "Available
     Network folder" you can see part of the mount point of
     the newly mounted flash drive filesystem - e.g "sda1".
     The full mount point is prefixed with "/media", so in
     this case the mount point becomes "/media/sda1".
  3) Go to http://192.168.10.1/webcmd.shtml .
  4) Type the following line in the "Command" input box:

     dd if=/dev/mtd4ro of=/media/sda1/firmware.bin

  5) Click "Apply"
  6) After few seconds, in the text area should appear this
     output:

        30080+0 records in
      30080+0 records out

  7) Type "sync" in the "Command" input box and click "Apply".
  8) At this point the OEM firmware is stored on the flash
     drive as "firmware.bin". The size of the file is 15040 KB.

Installation:
------------

* Flashing instructions (OEM web interface):
The OEM web interface accepts only files with names containing
"WN531A6". It's also impossible to flash the *-sysupgrade.bin
image, so we have to flash the *-initramfs-kernel.bin first and
use the OpenWrt's upgrade interface to write the sysupgrade
image.

  1) Rename openwrt-ramips-mt7621-wavlink_wl-wn531a6-initramfs-kernel.bin
     to WN531A6.bin.
  2) Connect your computer to the one of the LAN ports of the
     router with an Ethernet cable and open http://192.168.10.1
  3) Browse to Setup -> Firmware Upgrade interface.
  4) Upload the (renamed) OpenWrt image - WN531A6.bin.
  5) Proceed with the firmware installation and give the device
     a few minutes to finish and reboot.
  6) After reboot wait for the "WAVLINK" logo on the top cover
     to turn solid blue, and open http://192.168.1.1
  7) Use the OpenWrt's "Flash Firmware" interface to write the
     OpenWrt sysupgrade image:
     openwrt-ramips-mt7621-wavlink_wl-wn531a6-squashfs-sysupgrade.bin

* Flashing instructions (u-boot TFTP):
  1) Configure a TFTP server on your computer and set its IP
     to 192.168.10.100
  2) Rename the OpenWrt sysupgrade image to firmware.bin and
     place it in the root folder of the TFTP server.
  3) Power off the device and connect an Ethernet cable from
     one of its LAN ports your computer.
  4) Press the "Reset" button (and keep it pressed)
  5) Power on the device.
  6) After a few seconds, when the connected port LAN LED stops
     blinking fast, release the "Reset" button.
  7) Flashing OpenWrt takes less than a minute, system will
     reboot automatically.
  8) After reboot the WAVLINK logo on the top cover will indicate
     the current OpenWrt running status (wait until the logo tunrs
     solid blue).

Revert to the OEM Firmware:
--------------------------
* U-boot TFTP:
  Follow "Flashing instructions (u-boot TFTP)" and use the
  "firmware.bin" backup image.

* OpenWrt "Flash Firmware" interface:
  Upload the "firmware.bin" backup image and select "Force update"
  before continuing.

Notes:
-----
* The MAC address shown on the label at the back of the device
is assigned to the 2.4G WiFi adapter.

  MAC addresses assigned by the OEM firmware:
  2.4G: *:XX (label): factory@0x0004
    5G: *:XX + 1    : factory@0x8004
   WAN: *:XX - 1    : factory@0xe006
   LAN: *:XX - 2    : factory@0xe000

* The I2C bus and UART2 are fully functional. The headers are
not populated.

Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
2020-08-28 00:25:33 +02:00
Paul Spooren
a5d030a54f curl: move package to packages.git
curl is replaced by uclient-fetch within the OpenWrt build system and we
can therefore move curl to packages.git. This is based on the Hamburg
2019 decision that non essential packages should move outside base.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-08-27 21:18:21 +02:00
Hannu Nyman
395c848d16 tools/mpc: update to 1.2.0
Update mpc to version 1.2.0.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-08-27 21:18:16 +02:00
Andrew Freeman
ff5dd32164 ramips: add support for TP-Link TL-WR850N v2
This patch adds support for the TP-Link TL-WR850N v2. This device
is very similar to TP-Link TL-WR840 v4 and TP-Link TL-WR841 v13.

Specifications:
SOC: MediaTek MT7628NN
Flash: 8 MiB SPI
RAM: 64 MiB
WLAN: MediaTek MT7628NN
Ethernet: 5 ports (100M)

Installation Using the integrated tftp capability of the router:
1. Turn off the router.
2. Connect pc to one of the router LAN ports.
3. Set your PC IPv4 address to 192.168.0.66/24.
4. Run any TFTP server on the PC.
5. Put the recovery firmware on the root directory of TFTP server
   and name the file tp_recovery.bin
6. Start the router by pressing power button while holding the
   WPS/Reset button (or both WPS/Reset and WIFI buttons)
7. Router connects to your PC with IPv4 address 192.168.0.2,
   downloads the firmware, installs it and reboots. LEDs are
   flashing. Now you have OpenWrt installed.
8. Change your IPv4 PC address to something in 192.168.1.0/24
   network or use DHCP to get an address from your OpenWrt router.
9. Done! You can login to your router via ssh.

Forum link:
https://forum.openwrt.org/t/add-support-for-tp-link-tl-wr850n-v2/66899

Signed-off-by: Andrew Freeman <labz56@gmail.com>
[squash an tidy up commits, sort nodes]
Signed-off-by: Darsh Patel <darshkpatel@gmail.com>
[minor commit message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-27 16:36:18 +02:00
Adrian Schmutzler
6e936591f0 at91: explicitly set CONFIG_USB_SUPPORT for sam9x subtarget
The at91 target sets

  FEATURES:=usb usbgadget ...

in the target Makefile, which sets CONFIG_USB_SUPPORT=y in the
.config file for both subtargets.

However, when building with all kmods, the build fails with the
following error message:

  ERROR: module [...]/drivers/bluetooth/btusb.ko is missing.

It appears that only a part of the bluetooth files are compiled.
The package depends @USB_SUPPORT.

This can be easily healed by adding CONFIG_USB_SUPPORT=y to the
sam9x subtarget configuration. Before the 4.14->5.4 bump, the
same was also set in the target's config-4.14 file along with
several other USB config options that are not reimplemented.

Still, it remains a mystery to me why setting the same symbol
via target kernel config creates a different result than the
feature setting the same symbol in target-metadata.pl.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-27 16:36:18 +02:00
Hauke Mehrtens
bc19481826 hostapd: Fix compile errors after wolfssl update
This fixes the following compile errors after the wolfssl 4.5.0 update:
  LD  wpa_cli
../src/crypto/tls_wolfssl.c: In function 'tls_match_alt_subject':
../src/crypto/tls_wolfssl.c:610:11: error: 'GEN_EMAIL' undeclared (first use in this function); did you mean 'ENAVAIL'?
    type = GEN_EMAIL;
           ^~~~~~~~~
           ENAVAIL
../src/crypto/tls_wolfssl.c:610:11: note: each undeclared identifier is reported only once for each function it appears in
../src/crypto/tls_wolfssl.c:613:11: error: 'GEN_DNS' undeclared (first use in this function)
    type = GEN_DNS;
           ^~~~~~~
../src/crypto/tls_wolfssl.c:616:11: error: 'GEN_URI' undeclared (first use in this function)
    type = GEN_URI;
           ^~~~~~~
../src/crypto/tls_wolfssl.c: In function 'wolfssl_tls_cert_event':
../src/crypto/tls_wolfssl.c:902:20: error: 'GEN_EMAIL' undeclared (first use in this function); did you mean 'ENAVAIL'?
   if (gen->type != GEN_EMAIL &&
                    ^~~~~~~~~
                    ENAVAIL
../src/crypto/tls_wolfssl.c:903:20: error: 'GEN_DNS' undeclared (first use in this function)
       gen->type != GEN_DNS &&
                    ^~~~~~~
../src/crypto/tls_wolfssl.c:904:20: error: 'GEN_URI' undeclared (first use in this function)
       gen->type != GEN_URI)
                    ^~~~~~~
Makefile:2029: recipe for target '../src/crypto/tls_wolfssl.o' failed

Fixes: 00722a720c ("wolfssl: Update to version 4.5.0")
Reported-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-27 12:11:47 +02:00
Hauke Mehrtens
e9b6dd3151 pistachio: Use kernel 5.4 by default
Kernel 5.4 should be stable enough.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-27 00:34:46 +02:00
Adrian Schmutzler
adf830a3a5 ramips: remove further mt7621 code from local ethernet driver
While commit 734a8c46e7 focussed on removing stuff directly
selected by the NET_RALINK_* symbols, this patch removes additional
unused mt7621-specific code from the ethernet driver.

As with the previous patch, the main reason is to reduce the amount
of code we have to maintain and care about.

Note that this patch still keeps a few lines with
IS_ENABLED(CONFIG_SOC_MT7621) in mtk_eth_soc.h/.c, as this file is
still selected for the mt7621 subtarget.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-26 23:58:01 +02:00
Hauke Mehrtens
c1aa2d4411 mtd-utils: Update to version 2.1.2
The release notes says this:
As already said, the changes since 2.1.1 are primarily bug fixes, addressing
compiler warnings and issues reported by diagnostic tools, but also build
failures for some configurations.
https://lists.infradead.org/pipermail/linux-mtd/2020-July/081299.html

The size of the ubi-utils ipk increases on mips BE by 0.2%
old:
ubi-utils_2.1.1-1_mips_24kc.ipk:	70992
new:
ubi-utils_2.1.2-1_mips_24kc.ipk:	71109

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-26 23:29:35 +02:00
Hauke Mehrtens
561031921f tools: mtd-utils: Update to version 2.1.2
The release notes says this:
As already said, the changes since 2.1.1 are primarily bug fixes, addressing
compiler warnings and issues reported by diagnostic tools, but also build
failures for some configurations.
https://lists.infradead.org/pipermail/linux-mtd/2020-July/081299.html

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-26 23:29:35 +02:00
Hauke Mehrtens
00722a720c wolfssl: Update to version 4.5.0
This fixes the following security problems:
* In earlier versions of wolfSSL there exists a potential man in the
  middle attack on TLS 1.3 clients.
* Denial of service attack on TLS 1.3 servers from repetitively sending
  ChangeCipherSpecs messages. (CVE-2020-12457)
* Potential cache timing attacks on public key operations in builds that
  are not using SP (single precision). (CVE-2020-15309)
* When using SGX with EC scalar multiplication the possibility of side-
  channel attacks are present.
* Leak of private key in the case that PEM format private keys are
  bundled in with PEM certificates into a single file.
* During the handshake, clear application_data messages in epoch 0 are
  processed and returned to the application.

Full changelog:
https://www.wolfssl.com/docs/wolfssl-changelog/

Fix a build error on big endian systems by backporting a pull request:
https://github.com/wolfSSL/wolfssl/pull/3255

The size of the ipk increases on mips BE by 1.4%
old:
libwolfssl24_4.4.0-stable-2_mips_24kc.ipk:	386246
new:
libwolfssl24_4.5.0-stable-1_mips_24kc.ipk:	391528

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-26 23:29:30 +02:00
Hauke Mehrtens
2745f6afe6 curl: Use wolfssl by default
Instead of using mbedtls by default use wolfssl. We now integrate
wolfssl in the default build so use it also as default ssl library for
curl.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-26 21:00:43 +02:00
Hauke Mehrtens
b5191f3366 curl: Fix build with wolfssl
Backport a commit from upstream curl to fix a problem in configure with
wolfssl.

checking size of time_t... configure: error: cannot determine a size for time_t

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-26 21:00:42 +02:00
Adrian Schmutzler
18fbb9aa21 ath79: fix ethernet setup for some qca953x devices
On Comfast CF-E130N v2 and Mikrotik LHG HB board, the config
found in DTS appears to be strange:

- eth0 has "syscon","simple-mfd" set although it's not enabled
- eth1 is enabled redundantly (already "okay" in qca953x.dtsi)
- phy-handle is set for eth1 in DTS although it has a fixed-link
  in qca953x.dtsi

This seems like a copy-paste gone wrong. Remove the named options.

Run-tested on MikroTik LHG 2.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-25 20:54:24 +02:00
Adrian Schmutzler
e7c235612b uboot-at91: harmonize indent in Makefile
The indent in Makefile is mixed, harmonize it where reasonable.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-25 19:28:42 +02:00
Adrian Schmutzler
2f92e1d418 at91bootstrap: harmonize indent in Makefiles
The indent in Makefiles is mixed, harmonize it where reasonable.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-25 19:28:42 +02:00
Adrian Schmutzler
7f1540cc46 at91: introduce vendor_model scheme and drop board names
This introduces the vendor_model scheme to this target in order to
harmonize device names within the target and with the rest of
OpenWrt. In addition, custom board names are dropped in favor
of the generic script which takes the compatible.

Use the SUPPORTED_DEVICES variable to store the compatible where it
deviates from the device name, so we can use it in build recipes.

While at it, harmonize a few indents as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-25 19:28:42 +02:00
Hauke Mehrtens
186569e2e8 at91: Refresh kernel config
This was done by running:
make kernel_oldconfig CONFIG_TARGET=subtarget

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-25 19:28:42 +02:00
Sandeep Sheriker M
0d0a0d6649 at91: change dtb file path
Changing dtb file path since the dtb files are build in KDIR folder
with image- prefix.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
[remove commented lines]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-25 19:28:42 +02:00
Sandeep Sheriker M
abf6c288c1 uboot-at91: bump version to linux4sam-2020.04
Bump version to linux4sam-2020.04 and add patch to fix Wformat-security
warnings.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
2020-08-25 19:28:42 +02:00
Sandeep Sheriker M
9b36ca8032 at91bootstrap: bump version to v3.9.3
Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
2020-08-25 19:28:42 +02:00
Sandeep Sheriker M
a070e2ee42 at91: bump linux version to 5.4
Move patches to 5.4, put config only in subtarget directories.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
[refresh patches, add commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-25 19:28:42 +02:00
Pawel Dembicki
81ac2a73bc layerscape: add flashing manual for LS1012FRDM
LS1012FRDM is supported but there's no flashing instruction in README.

This patch adds it.

While at it, add a missing saveenv for MAC address setup.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[add comment about saveenv]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-25 16:42:21 +02:00
Felix Fietkau
e12ac40552 mt76: update to the latest version
f0beb7cbc443 mt76: mt7663u: fix memory leaks in mt7663u_probe
90c8422d3f56 mt76: mt7915: fix typo in function name
9cbbe4a30eaf mac80211: simplify TX aggregation start
974486ec2642 util: in worker setup, only overwrite function pointer if not NULL
519510277a8b mt76: initialize tx worker function earlier
3c361b1e3f4e mt76: mt7663u: fix dma header initialization
e8d489647c7f mt76: usb: fix use of q->head and q->tail
8124daf53130 mt76: sdio: fix use of q->head and q->tail
3c2cd8580377 mt76: unify queue tx cleanup code
780cdabb8659 mt76: remove qid argument to drv->tx_complete_skb
05aa857861fc mt76: remove swq from struct mt76_sw_queue
e861cb051833 mt76: rely on AQL for burst size limits on tx queueing
3218b914a2fb mt76: remove struct mt76_sw_queue
23529b5e93c1 mt76: mt7603: tune tx ring size
f6ca436ebea4 mt76: mt76x02: tune tx ring size
97e65131440c mt76: mt7603: check for single-stream EEPROM configuration
957b6c5ac273 mt76: mt7615: fix MT_ANT_SWITCH_CON register definition
96a541eedda9 mt76: mt7615: fix antenna selection for testmode tx_frames
b36d7ae096a3 mt76: mt7603: move number of streams detection to eeprom init

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-08-25 14:12:51 +02:00
Hauke Mehrtens
a69949a13f firewall: Fix PKG_MIRROR_HASH
Fixes: 6c57fb7aa9 ("firewall: bump to version 2020-07-05")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-24 18:54:00 +02:00