Commit Graph

49443 Commits

Author SHA1 Message Date
Sebastian Kemper
2127accd44 build: create $(PKG_SYMVERS_DIR) if non-existent
Commit 5d76065 moved the creation of the symvers directory to
include/kernel-build.mk. This is fine when building from scratch. But
when unpacking an SDK the directory doesn't exist and because the kernel
won't be built (again) this directory will not be created by the build
system, causing build failure if make tries to copy files into it.

This moves the creation of the symvers directory back into
include/kernel.mk so that the directory is created in any case.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
2020-11-19 18:52:15 +01:00
John Crispin
8134c542e2 base-files: generated named bridge-vlan sections
Signed-off-by: John Crispin <john@phrozen.org>
2020-11-19 15:38:37 +01:00
Marc Egerton
f276395cda ramips: add support for the Hak5 WiFi Pineapple Mark 7
This patch adds support for the WiFi Pineapple Mark 7, a wireless
penetration testing tool.

Specifications:
    * SoC: MediaTek MT7628 (580MHz)
    * RAM: 256MiB (DDR2)
    * Storage 1: 32MiB NOR (SPI)
    * Storage 2: 2GB eMMC
    * Wireless 1: 802.11b/g/n 2.4GHz (Built In)
    * Wireless 2: 802.11b/g/n 2.4GHz (MT7601)
    * Wireless 3: 802.11b/g/n 2.4GHz (MT7601)
    * USB: 1x USB Type-A 2.0 Host Port
    * Ethernet: 1x USB Type-C AX88772C Ethernet
    * UART: 57600 8N1 on PCB
    * Inputs: 1x Reset Button
    * Outputs: 1x RGB LED
    * FCCID: 2AA52MK7

Flash Instructions:
    Original firmware is based on OpenWRT.
    Use sysupgrade via SSH to flash.

Signed-off-by: Marc Egerton <foxtrot@realloc.me>
[pepe2k@gmail.com: set only required/used gpio groups to gpio function]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2020-11-18 23:49:34 +01:00
Piotr Dymacz
a92d55efcf ath79: fix reset button support on 8devices Lima
This fixes 'linux,code' property name and value for the 'reset' key node
in 8devices Lima DTS file.

Problem and solution were reported on the forum, see:
https://forum.openwrt.org/t/resetbutton-not-working-ath79-8devices-lima/78810

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2020-11-18 23:49:34 +01:00
Piotr Dymacz
6d65e3af9b ath79: calculate Eth MACs from WLAN on ALFA Network R36A
New batches of the R36A board series might no longer keep separated
Ethernet MAC addresses stored in flash. Use same approach as on the
N2Q and calculate Ethernet MACs from WLAN one which is kept in ART.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2020-11-18 23:49:34 +01:00
Piotr Dymacz
1bce45fc0f uboot-envtools: ath79: add support for ALFA Network Pi-WiFi4
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2020-11-18 23:49:34 +01:00
Piotr Dymacz
64a6f4a9c1 ath79: add support for ALFA Network Pi-WiFi4
ALFA Network Pi-WiFi4 is a Qualcomm QCA9531 v2 based, high-power 802.11n
WiFi board in Raspberry Pi 3B shape, equipped with 1x FE and 4x USB 2.0.

Specifications:

- Qualcomm/Atheros QCA9531 v2
- 650/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16+ MB of flash (SPI NOR)
- 1x 10/100 Mbps Ethernet
- 2T2R 2.4 GHz Wi-Fi with Qorvo RFFM8228P FEM
- 2x IPEX/U.FL connectors on PCB
- 4x USB 2.0 Type-A
- Genesys Logic GL850G 4-port USB HUB
- USB power is controlled by GPIO
- 5x LED (3x on PCB, 2x in RJ45, 4x driven by GPIO)
- 1x button (reset)
- external h/w watchdog (EM6324QYSP5B, enabled by default)
- 1x micro USB Type-B for power and system console (Holtek HT42B534)
- UART and GPIO (8-pin, 1.27 mm pitch) header on PCB

Flash instruction:

You can use sysupgrade image directly in vendor firmware which is based
on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot:

1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
   device, wait for first blink of all LEDs (indicates network setup),
   then keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2020-11-18 23:49:34 +01:00
Piotr Dymacz
d44463b087 ath79: add label MAC address for ALFA Network N5Q
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2020-11-18 23:49:34 +01:00
Adrian Schmutzler
7e7470b517 scripts: add const_structs.checkpatch for checkpatch.pl
Kernel has separated the structs that are reported to be const in
checkpatch.pl into a file of its own, const_structs.checkpatch.

This file has been missing after the recent update of checkpatch.pl,
leading to the following message:

  No structs that should be const will be found - file
  '/data/openwrt/scripts/const_structs.checkpatch': No such file
  or directory

This commit adds the relevant file from v5.10-rc4.

Fixes: 086ee09bbc ("scripts: Update checkpatch.pl to 2020-06-11")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-18 21:50:58 +01:00
Adrian Schmutzler
6fdd4187e0 scripts: checkpatch.pl: suppress warnings about MAINTAINERS
The kernel expects changes to MAINTAINERS for all removed or added
files, printing warnings like:

  WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
  #828:
  deleted file mode 100644

Since this does not apply to "our" files in OpenWrt repo, this
warning should be disabled.

This can be achieved easiest by setting $reported_maintainer_file
to 1. While this is a hack that tricks the script into believing
the proper MAINTAINERS changes have been made, it's the easiest
solution as it does not require to touch any other code.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-18 21:50:53 +01:00
Adrian Schmutzler
e0cc68daad ramips: use m25p,fast-read on Xiaomi Mi Router 4A Gb/3G v2
The Xiaomi Mi Router 4A Gigabit model has a race condition on bootup
causing the SQUASHFS data errors to appear and create a bootloop
scenario.

Adding the m25p,fast-read property resolves this issue.

Suggested-by: David Bentham <db260179@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-18 21:13:46 +01:00
John Audia
667f6c7f49 kernel: bump 5.4 to 5.4.77
Manually rebased patches:
 bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch
 generic-backport/744-v5.5-net-sfp-soft-status-and-control-support.patch
 layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch
 mvebu/patches-5.4/521-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch

Removed:
 layerscape/patches-5.4/819-uart-0012-tty-serial-lpuart-add-LS1028A-support.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
              lantiq/Easybox 904 xDSL, x86_64
Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL, x86_64

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-18 21:13:46 +01:00
Nick Hainke
79f3f1358b ath79: Add support for Ubiquiti NanoBeam AC Gen2
CPU:         Atheros AR9342 rev 3 SoC
RAM:         64 MB DDR2
Flash:       16 MB NOR SPI
WLAN 2.4GHz: Atheros AR9342 v3 (ath9k)
WLAN 5.0GHz: QCA988X
Ports:       2x GbE

Flashing procedure is identical to other ubnt devices.
https://openwrt.org/toh/ubiquiti/common

Flashing through factory firmware
1. Ensure firmware version v8.7.0 is installed.
   Up/downgrade to this exact version.
2. Patch fwupdate.real binary using
   `hexdump -Cv /bin/ubntbox | sed 's/14 40 fe 27/00 00 00 00/g' | \
    hexdump -R > /tmp/fwupdate.real`
3. Make the patched fwupdate.real binary executable using
   `chmod +x /tmp/fwupdate.real`
4. Copy the squashfs factory image to /tmp on the device
5. Flash OpenWrt using `/tmp/fwupdate.real -m <squashfs-factory image>`
6. Wait for the device to reboot
(copied from Ubiquiti NanoBeam AC and modified)

To keep it consistent, we will add the gen1 variant to
the nanobeam ac gen1.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2020-11-18 21:13:46 +01:00
Hauke Mehrtens
a8030ea40f valgrind: Update to version 3.16.1
No special changes, just get in sync with recent code.
See here for the changelog:
https://valgrind.org/docs/manual/dist.news.html

The ipkg sizes changes as follows for mips 24kc :
	3.15   : valgrind_3.15.0-2_mips_24kc.ipk 1450680
	3.16.1 : valgrind_3.16.1-1_mips_24kc.ipk 1491954

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-11-18 19:01:44 +01:00
Hauke Mehrtens
557fe9cd3b strace: Update to version 5.9
No special changes, just get in sync with recent code.
See here for the changelog:
https://github.com/strace/strace/releases/tag/v5.9

The ipkg sizes changes as follows for mips 24kc :
	5.8 : strace_5.8-1_mips_24kc.ipk 271195
	5.9 : strace_5.9-1_mips_24kc.ipk 278352

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-11-18 19:01:33 +01:00
Hauke Mehrtens
ad0711559d iperf3: Update to version 3.9
No special changes, just get in sync with recent code.
See here for the changelog:
http://software.es.net/iperf/news.html#iperf-3-9-released

The ipkg sizes changes as follows for mips 24kc :
	3.7 : iperf3_3.7-1_mips_24kc.ipk 39675
	3.9 : iperf3_3.9-1_mips_24kc.ipk 41586

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-11-18 18:59:36 +01:00
Hans Dedecker
7330348f2d ethtool: update to version 5.9
The ipkg sizes changes as follows for mips 24kc :
	5.8 : ethtool_5.8-1_mips_24kc.ipk 34930
	5.9 : ethtool_5.9-1_mips_24kc.ipk 35241

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-11-17 21:31:23 +01:00
Matthias Schiffer
3f1109bf2a
base-files: fix backwards compatiblity of rc.common EXTRA_COMMANDS
Avoid needlessly breaking old initscripts that set EXTRA_COMMANDS. This
will aid in debugging (as it simplifies reverting to an older version of
a package) and unbreaks third-party feeds (and packages that maintain
their OpenWrt initscripts as part of the software's repo instead of the
OpenWrt feed like fastd).

Without this, initscripts that set EXTRA_COMMANDS become completely
unusable, as all default commands like start/stop cease working.

Fixes: 1a69f50dc6 ("base-files: fix rc.common help alignment")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2020-11-17 17:57:42 +01:00
David Bauer
21dfdfd78b hostapd: set validity interval for BSS TMRA
This sets the validity interval for the BSS transition candidate
list to the same value as the disassociation timer.

Currently the value is always 0, which is the specification states is a
reserved value. Also, wpa_supplicant and from the looks of it some
Android implementations will outright ignore the candidate list in this
case.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-11-17 17:06:39 +01:00
Dobroslaw Kijowski
edb93eda16 hostapd: add support for static airtime policy configuration
* Add support for passing airtime_sta_weight into hostapd configuration.
* Since that commit it is possible to configure station weights. Set higher
  value for larger airtime share, lower for smaller share.

I have tested this functionality by modyfing /etc/config/wireless to:

config wifi-device 'radio0'
	...
        option airtime_mode '1'

config wifi-iface 'default_radio0'
	...
        list airtime_sta_weight '01:02:03:04:05:06 1024'

Now, when the station associates with the access point it has been assigned
a higher weight value.
root@OpenWrt:~# cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan0/stations/01\:02\:03\:04\:05\:06/airtime
RX: 12656 us
TX: 10617 us
Weight: 1024
Deficit: VO: -2075 us VI: 256 us BE: -206 us BK: 256 us

[MAC address has been changed into a dummy one.]

Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
2020-11-17 17:06:16 +01:00
Dobroslaw Kijowski
03cdeb5f97 hostapd: fix per-BSS airtime configuration
airtime_mode is always parsed as an empty string since it hasn't been
added into hostapd_common_add_device_config function.

Fixes: e289f183 ("hostapd: add support for per-BSS airtime configuration")
Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
2020-11-17 17:05:20 +01:00
David Bauer
0ce5f15f9c hostapd: ubus: add get_status method
This adds a new get_status method to a hostapd interface, which
provides information about the current interface status.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-11-17 17:05:06 +01:00
David Bauer
80b531614b hostapd: ubus: add VHT capabilities to client list
This adds parsed VHT capability information to the hostapd
get_clients method.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-11-17 17:04:40 +01:00
David Bauer
cd8052da49 hostapd: ubus: add driver information to client list
This adds information from mac80211 to hostapd get_client ubus function.
This way, TX as well as RX status information as well as the signal can
be determined.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-11-17 17:04:33 +01:00
David Bauer
7463a0b5ee hostapd: fix variable shadowing
Fixes commit 838b412cb5 ("hostapd: add interworking support")

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-11-17 17:04:22 +01:00
Daniel Golle
01b83040d3 umdns: convert seccomp filter rules to OCI format
procd-seccomp switched to OCI-compliant seccomp parser instead of our
(legacy, OpenWrt-specific) format. Convert ruleset to new format.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-11-17 13:12:37 +00:00
Daniel Golle
62a3430f9b procd: drop legacy seccomp support, switch to OCI parsers
d8f36f5 seccomp: specifying architectures is optional
 d352e6e seccomp: switch to new OCI compliant parser
 c110405 trace: switch to OCI seccomp JSON output

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-11-17 13:12:37 +00:00
Alberto Bursi
a4d52522c7 wireguard-tools: fix category/description in menuconfig
wireguard-tools is trying to import the menuconfig section
from the wireguard package, but since it's not anymore in
the same makefile this seems to fail and wireguard-tools
ends up in "extra packages" category instead with other
odds and ends.

Same for the description, it's trying to import it from the
wireguard package but it fails so it only shows the line
written in this makefile.

remove the broken imports and add manually the entries
and description they were supposed to load

Fixes: ea980fb9c6 ("wireguard: bump to 20191226")

Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
[fix trailing whitespaces, add Fixes]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-17 13:03:16 +01:00
Adrian Schmutzler
aafbfc6ac3 ath79: fix missing ";;" in 11-ath10k-caldata
This adds a missing ";;" in the switch-case in 11-ath10k-caldata.

Fixes: 4d36569b9c ("ath79: fix ath10k caldata extraction on some
D-Link DIR-842 C3 devices")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-16 19:26:25 +01:00
Paul Fertser
4d36569b9c ath79: fix ath10k caldata extraction on some D-Link DIR-842 C3 devices
According to forum threads [0][1] and a report on IRC by Doc-Saintly
some of those boards have calibration data in a different place. Only
one alternative location is known.

Without proper board calibration data (board.bin having all 0xff bytes)
ath10k firmware still tries to load but crashes on startup with a
confusing error message.

If you're applying this patch manually on your device do not forget to
remove /lib/firmware/ath10k/pre-cal-pci-0000:00:00.0.bin and reboot to
force caldata re-extraction.

[0] https://forum.openwrt.org/t/support-for-d-link-dir842-rev-c3/41654
[1] https://forum.openwrt.org/t/d-link-dir-842-cant-access-firmware-upload-form/65454

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2020-11-16 14:05:24 +01:00
DENG Qingfang
03d178727a kernel: remove mvsw61xx swconfig driver
All targets that used mvsw61xx have switched to upstream mv88e6xxx DSA
driver, so it can be removed.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-11-16 13:55:05 +01:00
Adrian Schmutzler
7661b83768 mediatek: fix mixed indent in DTS files
mediatek frequently had mixed indent (tabs vs. spaces) in DTS files
and DTS file kernel patches (probably due to careless copy/paste).

The harmonizes these cases to tabs-only, as usual for DTS(I).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-16 13:43:39 +01:00
Adrian Schmutzler
2658008a2a treewide: remove default-state off for LEDs
default-state = "off" is default for LEDs, no need to specify it
explicitly.

https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-16 13:43:39 +01:00
Daniel González Cabanelas
4e885dd90a mvebu: LS421DE: improve the HDD leds
Improve the HDD LEDs used for disk activity:
 - Use the trigger activity per ata channel

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2020-11-16 13:43:39 +01:00
DENG Qingfang
fe1f11ce32 ramips: mt7621: fix Telco X1 GPIO switches
The GPIO base of MT7621 GPIO 0~31 is 480 on kernel 5.4
Fix the GPIO numbering.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-11-16 13:43:39 +01:00
Hans Dedecker
0f7a3288e1 odhcpd: update to latest git HEAD
fb55e80 dhcpv6-ia : write statefile atomically

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-11-15 18:48:33 +01:00
Hans Dedecker
aaf3443e1a dropbear: update to 2.81
Update dropbear to latest stable 2.81; for the changes see https://matt.ucc.asn.au/dropbear/CHANGES

Refresh patches

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-11-15 18:23:47 +01:00
Paul Spooren
47e089e30e bcm27xx: add bit variant to redundant RaspberryPi
Both bcm2709 and bcm2710 firmware can run on the same RaspberryPi
models, varying however in 32 and 64 Bit architectures. The model name
alone does not include the architecture information, which becomes
problematic if looking at a overview that only contains the names. By
adding a variant it is possible to tell the architecture.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-15 00:24:12 +00:00
Rui Salvaterra
c63908afd2 wireguard-tools: drop the dependency on ip-{tiny,full}
BusyBox ip already provides the required functionality and is enabled by default
in OpenWrt. This patch drops the ip dependency and makes the BusyBox ip required
dependencies explicit, allowing for a significant image size reduction.

openwrt-ath79-generic-ubnt_nanostation-loco-m-squashfs-sysupgrade.bin size:
4588354 bytes (with ip-tiny)
4457282 bytes (with BusyBox ip)

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2020-11-14 17:46:35 +01:00
Felix Fietkau
d31da371ac build: support cmake verbose for host builds
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-14 14:48:30 +01:00
Felix Fietkau
5752ccb60f libjson-c: enable rpath for host builds to fix errors on recent macOS
Same approach as on libubox

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-14 14:48:30 +01:00
Felix Fietkau
6c2ef55e69 tools/bc: use autoreconf to fix build failure on macOS with recent Xcode versions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-14 14:48:30 +01:00
Felix Fietkau
a99f88a186 tools/libelf: use autoreconf to fix build failure on macOS with recent Xcode versions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-14 14:48:30 +01:00
Felix Fietkau
3104370455 build: detect broken make version on macOS
Apple ships a broken make version with the Xcode command line tools.
Homebrew installs make as gmake by default in order to not collide with
Apple's version.
Exit with an error if the broken one is used accidentally

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-14 14:48:30 +01:00
Felix Fietkau
0fd214d89f tools/fakeroot: fix build on macOS with recent Xcode versions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-14 14:48:30 +01:00
Felix Fietkau
cc16f5d73e build: try to find getopt in macOS homebrew's standard location
It is not symlinked to /usr/local/bin by default

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-14 14:48:30 +01:00
Hans Dedecker
ee8ef9b10b iproute2: update to 5.9
Update iproute2 to latest stable 5.9; for the changes see https://lwn.net/Articles/834755/

Refresh patches

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Hauke Mehrtens <hauke@huake-m.de>
2020-11-14 09:24:48 +01:00
Adrian Schmutzler
95b0751d0f ipq40xx: do not remove pci@40000000 for ap.dk04.1
This pci@40000000 node from upstream was dropped when the device
was converted from local DTS(I) files to kernel patches in [1] to
ensure that change was purely cosmetic.

However, the DK04.1 has a PCI-E slot by default, so let's keep
(i.e. not remove) the kernel definition now.

[1] c4beac9ea2 ("ipq40xx: use upstream DTS files for IPQ4019/AP-DK04.1")

Suggested-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-13 18:34:41 +01:00
Robert Marko
4f277b4da5 ipq40xx: 5.4: update and reorder patches
A lot of patches are outdated versions of upstreamed patches and
drivers.

So lets pull in the upstreamed patches and reorder remaining ones.

This drops the unnecessary 721-dts-ipq4019-add-ethernet-essedma-node.patch
which adds nodes for not yet in OpenWrt IPQESS driver.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
[do not touch 902-dts-ipq4019-ap-dk04.1.patch here]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-13 16:08:58 +01:00
Felix Fietkau
a8fb12a7d6 build: filter out more autogenerated kernel config options
Define wildcard patterns for filtering in target/linux/generic/config-filter
Preparation for supporting newer kernels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-13 13:18:20 +01:00