Commit Graph

35229 Commits

Author SHA1 Message Date
Pavel Kubelun
4cd67a4f21 ipq806x: move smb208 nodes into a regulator subnode
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-06-22 19:32:05 +02:00
Hauke Mehrtens
84b3d92180 lantiq: make EASY80920 work with both chip versions
The EASY80920 is available with the A1X and the A2X chip version
depending on the board version. Add both firmware versions to device
tree and make the driver load the correct version depending on the chip
version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-21 21:58:59 +02:00
Hauke Mehrtens
7f5b8cc376 lantiq: use new partition layout for EASY80920NAND
This matches the EASY80920NAND boards with UGW.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-21 21:58:59 +02:00
Hauke Mehrtens
8bfa230e9f lantiq: build fullimage.img for EASY80920NAND
This image format is used by Lantiq's / Intel's UGW version 6.1 to 7.1.
These images can be flashed onto a board with the SoC vendor boot
loader as a replacement for the vendor firmware.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-21 21:58:59 +02:00
Hauke Mehrtens
ecdfbeae85 lantiq: remove patch adding support for building without reset controller
The lantiq kernel arch code selects CONFIG_RESET_CONTROLLER always, so
it is always selected when the lantiq target is build. we do not need
support for unselected CONFIG_RESET_CONTROLLER option.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-21 21:58:59 +02:00
Vishnu Swaroop Duddu
ee613097be tools: patch-image: Added optional size option
Added optional command line option for patch-image tool
Default 16KB size is still maintained as this is an optional argument.
if one wants to specify or increase size they can provide this option.
sample usage: patch-dtb <file> <dtb> [dtb max size]

Signed-off-by: Vishnu Swaroop Duddu <duddu.swaroop@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-21 21:58:07 +02:00
Álvaro Fernández Rojas
63cb2fb88d brcm2708: properly detect the Raspberry Pi Zero
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 20:17:38 +02:00
Álvaro Fernández Rojas
a95d64a269 brcm63xx: simplify block size and image offset options
Instead of having CFE_EXTRAS for every device that need specific block sizes
and image offset, let's define a couple of vars which can be customized for
each device.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 16:42:47 +02:00
Álvaro Fernández Rojas
13253fbcbd brcm63xx: add sysupgrade images
Some devices require padded images in order to prevent CFE from flashing them
to the wrong offset.
For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this
implies 8 and 16 MB images, which is way too large and some devices aren't
capable of flashing them through sysupgrade.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 16:42:44 +02:00
Ben Mulvihill
7df43d88ec lantiq: fix typo in new image generation
Fix typo in commit a6f7536a73
(new image generation)

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
2016-06-21 13:49:54 +02:00
Ben Greear
040ebe2473 ath10k-ct: Update to latest 10.4.3 CT firmware for 9980 chipsets.
This works around regressions added in the 4.7 kernel.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-06-21 13:44:12 +02:00
Daniel Dickinson
9da1bf58b6 sdk: Fix keeping unset as unset
The configuration preservation mechanism fails to keep items was are unset
as unset.  For busybox this causes issues when building with custom
settings in the SDK.  Therefore preserve busybox unset settings.
In addition we preserve non-package selection unset settings because
they may be important for making sure we compile and identical
package for packages that are recompiled in the SDK.

Now that SDK not longer ships .config this becomes relevant for
any use of the SDK.

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-06-21 13:36:23 +02:00
Kevin Darbyshire-Bryant
5d60bedcb3 ath10k-firmware: fix board-2.bin download URL
Original URL got 303 redirect which then also dropped the commit id
leading to different file revision & MD5 mismatch.

Corrected URL & clarified commit ID use in Makefile

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-21 12:00:10 +02:00
Jonas Gorski
d61d82e3d3 brcm63xx: merge DSL-274X-F1 profiles
The only difference is a field in the image tag header, so just define
two images for it instead of treating them as separate devices.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:22 +02:00
Jonas Gorski
a89f5e795a brcm63xx: move the bootargs into the dtb files
Instead of using a fixed commandline, allow one per device.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:22 +02:00
Jonas Gorski
80403e4558 brcm63xx: use upstreamed compatible name for the periph intc
This makes the eventual migration to bmips easier, as dts files
will require less changes.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:22 +02:00
Daniel Gonzalez
29444e4754 brcm63xx: fix external IRQs
External IRQs are currently broken, fix the BCM6345_EXT_IRQ driver.

Since the adoption of the new driver irq-bcm6345-ext, in Chaos Calmer,
external IRQs don't work. It seems there were some minor errors at the initial
development of the driver.

This patch fixes the ticket https://dev.openwrt.org/ticket/21613

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:21 +02:00
Álvaro Fernández Rojas
6b5f6d6601 brcm63xx: fix single profile selection
Fixes commit c6990347.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:21 +02:00
Rafał Miłecki
a180f90518 bcm53xx: backport BCM5301X patches for SRAB
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-20 23:07:31 +02:00
Rafał Miłecki
65a22d84ad kernel: backport bgmac changes from net-next
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-20 23:07:31 +02:00
Rafał Miłecki
4bd0edba1e kernel: rename bgmac patches that went into the same kernel
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-20 23:07:31 +02:00
John Crispin
163cc22643 procd: properly set /dev/snd permission and group
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-20 11:48:02 +02:00
Xotic750
e2d2b136b3 e2fsprogs: Bump to v1.43.1
Signed-off-by: Graham Fairweather <xotic750@gmail.com>
2016-06-20 11:45:45 +02:00
Michael Lee
81913e4996 ramips: remove duplicate i2c dts info
Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-20 11:45:44 +02:00
Michael Lee
60ccfbbad0 ramips: update i2c drivers
* add rt_i2c structure to store driver data
* rewrite read/write check function and add i2c error status check.
  so we don't need to wait until time out.
* add 10 bits address support. according to the data sheet i think
  it is possible. but i haven't verify it.
* the most important is start transfer only need once. otherwise
  it cause I2C_STARTERR status.
* add set i2c clock speed register by dts options "clock-frequency".
  not just hard code it.
* add mt7621 i2c driver. i just copy i2c-ralink.c and change register
  names. and the hardware don't support error status. so i remove it.
  but the logic is the same.

Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-20 11:45:44 +02:00
Josh Bendavid
66ffd0ddf9 ipq806x: fix MAC_POWER_SEL switch configuration
Fixes instability/corruption on the ethernet interface connected to port0 on the switch.

Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
2016-06-20 11:45:44 +02:00
Mathias Kresin
153b3f05d4 lantiq: BTHOMEHUBV5A - use the power event code for the restart button
The restart event code is used in LEDE to trigger a factory reset on
long press as well.

By using the power event code, the restart functionality can be used
without being prone to trigger a factory reset.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-20 11:45:44 +02:00
Mathias Kresin
551c9c8300 lantiq: diag - switch off the power led on failsafe
This patch is a follow up to commit 4cf3fd4 "add support for indicating
the boot state using three leds".

At the time of writing the patch, I wasn't aware that it's possible to
switch info failsafe after boot (factory reset).

Enabling the failsafe led without disabling the running led causes an
unexpected led colour on devices using a single multicolour led to
indicate the boot state.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-20 11:45:44 +02:00
Mathias Kresin
32012decc3 lantiq: fix build of NAND sysupgrade images
The *_UBIFS_OPTS variables need to be prefixed with DEVICE_ to match
the profile name.

The conditions need to be evaluated after the *_UBIFS_OPTS are set,
otherwise the variables are always empty.

Do not append or pass the DEVICE_ prefixed profile name to the images.
Use the name that is passed by the Image/Build/Profile/ step.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-20 11:45:44 +02:00
Mathias Kresin
ac1cc30cdf lantiq: ltq-atm: fix xrx200 depends
This one was missed by abc346db0e.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-20 11:45:44 +02:00
John Crispin
e4bad7953b fstools: fix missing dependency
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-18 17:07:44 +02:00
Rafał Miłecki
776b24d9aa bcm53xx: properly support sysupgrade using Seama on NAND devices
It updates kernel and then formats UBI without loosing erase counters.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-20 08:02:32 +02:00
Rafał Miłecki
7e08f2ccbd mtd: support -c (datasize) option for fixseama command
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-20 08:01:31 +02:00
Rafał Miłecki
cf6d9d97fb kernel: rename B53 symbols to avoid upstream kernel conflict
In kernel 4.7 there is upstreamed b53 driver using (mostly?) the same
symbols as our b53 does. Change our symbols so both drivers can coexist
in kernel tree.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-20 08:00:14 +02:00
Rafał Miłecki
1aca291214 kernel: mtdsplit: calculate kernel partition precisely for Seama
So far "kernel" partition didn't contain just a kernel. It also included
Seama header and meta data. This was making kernel update complex and it
wasn't trivial to read kernel size.
Fix it by making "kernel" parition contain just a kernel image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-20 07:58:29 +02:00
Daniel Golle
fac7ba1abc uboot-envtools: add support for ZBT-WG2626
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-19 16:22:23 +02:00
Daniel Golle
67475b0e31 kernel: backport cosmetic ubifs patch
Despite the MS_SILENT flag being set when probing for ubifs rootfs a
logline indicating an error is generated during boot:
UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19
This leads to confusion and there shouldn't be lines containing
the word 'error' twice in a bootlog if actually everything is fine
(just the rootfs happens to be something else than ubifs)

The patch added has been submitted and was accepted upstream, see:
http://lists.infradead.org/pipermail/linux-mtd/2016-June/068056.html
http://patchwork.ozlabs.org/patch/637491

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-18 19:14:05 +02:00
Felix Fietkau
982108f7e5 lantiq: clean up / fix LegacyDevice template handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 20:23:11 +02:00
Felix Fietkau
f4c59a204e lantiq: get rid of ifneq() checks inside command templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 20:23:11 +02:00
Felix Fietkau
8a156ad129 image.mk: add a separate step for building kernel images for LegacyDevice support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 20:23:11 +02:00
Felix Fietkau
425e2c1d96 image.mk: run LegacyDevice prepare once instead of once per filesystem
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 20:11:27 +02:00
Felix Fietkau
3004275c17 image.mk: fix make variable/command context leakage between LegacyDevice templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 20:11:27 +02:00
John Crispin
9a0381f969 lantiq: small fix for legacy profile builds
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 20:11:24 +02:00
Jo-Philipp Wich
ff4a804669 octeon: fix image build
The generic sysupgrade image attempted to use the wrong filesystem type due
to premature variable interpolation leading to the following error on the
buildbot system:

    cp: cannot stat `.../root.squashfs': No such file or directory
    make[4]: *** [.../tmp/lede-octeon-generic-ext4-sysupgrade.tar] Error 1

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 17:42:46 +02:00
Felix Fietkau
240137a744 mt76: update to the latest version, fixes a SMPS handling issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 14:51:11 +02:00
John Crispin
e81020c317 medaitek: convert the NAND target to UBI
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 04:13:08 +02:00
John Crispin
16e04fd1b4 procd: update to latest git head
fixes !root perms of /var/{run,lock,state}

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 04:13:07 +02:00
John Crispin
87eb8fad13 base-files: remove fstab symlink
the symlink no longer gets used since we switched to the block-mount tool.

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 04:13:07 +02:00
David Pinilla Caparrós
bbbe9932e3 ar71xx: WDR4300: Fixed default VLAN order
Reordered the VLANs so the LAN ports are set to VLAN 1 and the WAN port is set to VLAN 2, as in the other routers in the config file. Moreover, this model had this VLAN mapping in OpenWRT Chaos Calmer. It seems that the VLAN were switched when fixing a bug in the port mapping ( OpenWRT changeset 47799 )

Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
2016-06-17 04:13:07 +02:00
John Crispin
b180f24a3b Revert "ramips: update i2c drivers"
This reverts commit d8202a8409.

the commit broke I2C on various boards.

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 04:13:07 +02:00