Commit Graph

51854 Commits

Author SHA1 Message Date
Stijn Tintel
57807f50de base-files: add option to make /var persistent
In OpenWrt, /var is symlinked to /tmp by default. This is done to reduce
the amount of writes to the flash chip, which often have not the
greatest durability. As a result, things like DHCP or UPnP lease files,
are not persistent across reboots.

Since OpenWrt can run on devices with more durable storage, it makes
sense to have an option for a persistent /var. Add an option to make
/var persistent. When enabled, /var will no longer be symlinked to /tmp,
but /var/run will be symlink to /tmp/run, as it should contains only
files that should not be kept during reboot. The option is off by
default, to maintain the current behaviour.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-08-22 18:07:51 +03:00
Stijn Tintel
31d984a96e lldpd: bump to 1.0.12
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-08-22 18:07:20 +03:00
Daniel Golle
f4493c647a
mediatek: mt7623: enable clock drivers for Mali-450 and audio
Built clock drivers for G3DSYS and AUDSYS into the kernel to allow
multimedia features (GPU and audio) to work if they exist.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-22 14:34:29 +01:00
Shane Synan
9baca41064 ipq806x: fix min<>target opp-microvolt DTS mixup
Rearrange all voltage triplets for "opp_table0" to match the
specifications.  "opp-microvolt" and "opp-microvolt-<name>" triplets
are in order of <target min max>, and NOT <min target max>.

Previously, the CPU would *always* spend its time at the "minimum"
voltage, ignoring the actual intended target.  This is a regression
from previous behavior.

On an NBG6817 with a Qualcomm CPU of PVS bin #2...
(see &opp_table0 -> opp-1725000000 -> opp-microvolt-speed0-pvs2-v0)

* Before:
/usr/bin/tail -n +1 /sys/kernel/debug/opp/cpu0/opp\:1725000000/supply-0/u_volt_*
==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_max <==
1260000

==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_min <==
1200000

==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_target <==
1140000

* After:
/usr/bin/tail -n +1 /sys/kernel/debug/opp/cpu0/opp\:1725000000/supply-0/u_volt_*
==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_max <==
1260000

==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_min <==
1140000

==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_target <==
1200000

To check voltages and frequencies at run time, use...
/bin/cat /sys/kernel/debug/regulator/regulator_summary &&
  /bin/cat /sys/kernel/debug/clk/clk_summary | grep "hfpll"

See
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/Documentation/devicetree/bindings/opp/opp.txt?h=v5.4.142#n91

Fixes: 1e25423be8 ("ipq806x: refresh dtsi patches")

Signed-off-by: Shane Synan <digitalcircuit36939@gmail.com>
Reviewed-by: Ansuel Smith <ansuelsmth@gmail.com>
[commit message style cleanup, another kernel refresh]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-21 23:54:31 +02:00
Adrian Schmutzler
c23bc5032f ramips: add label MAC address for Onion Omega 2(+)
Thanks to a hint from Michael Siegenthaler in 4b4fa2f9fe ("ramips:
fix ethernet MAC address on Omega2"), the label MAC address of
the Onion Omega 2(+) can be set based on its documentation [1].

[1] https://docs.onion.io/omega2-docs/mac-address.html

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-21 23:42:32 +02:00
Kevin Darbyshire-Bryant
c9faa84b31 firmware-utils: fix build on not Linux
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-08-21 20:16:39 +01:00
Jan Hoffmann
23bf503605 ltq-vdsl: add missing backslash
This error was introduced with the recent cleanup.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2021-08-21 19:16:26 +01:00
Álvaro Fernández Rojas
e1142041b0 bcm27xx: switch to kernel 5.10
After testing it on RPi B+ and RPi 4B it seems stable enough to enable it on
OpenWrt master.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:07 +02:00
Álvaro Fernández Rojas
8299d1f057 bcm27xx: add kernel 5.10 support
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:07 +02:00
Álvaro Fernández Rojas
33b6885975 generic: fix debloat dma-buf 5.10 patch
The current patch produces the following error when CONFIG_DMABUF_HEAPS is
enabled:
drivers/built-in.a: member drivers/dma-buf/heaps in archive is not an object

Fixes: b10d604459 ("kernel: add linux 5.10 support")

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:06 +02:00
Álvaro Fernández Rojas
41ceec8100 generic: add missing 5.10 config symbols
These symbols are needed for bcm27xx 5.10 kernel support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:06 +02:00
Álvaro Fernández Rojas
8e4110d81e bcm27xx-gpu-fw: update to latest version
Multiple firmware fixes needed for kernel updates.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:06 +02:00
Álvaro Fernández Rojas
a71a51c7ff bcm27xx-userland: update to latest version
Properly recognise all BCM2711 variants

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:06 +02:00
Daniel Golle
4f1c5b01c1
mediatek: mt7623: backport musb, improve HDMI console
Backport support for dual-role USB 2.0 as that's what is actually
built-into MT7623.
Improve HDMI console by enabling VT and setting up tty1..tty6.
Re-add accidentally removed CONFIG_ARM_ARCH_TIMER.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-21 17:23:36 +01:00
Andre Heider
60af8d7533 prereq-build: require python3-distutils
Debian and Ubuntu ship a python3-minimal package which does not include
the distutils module. This is not supported by upstream and can be
considered a broken python distribution.

In practice, many scripts depend on said module, and this is a reoccuring
pain point for building various OpenWrt packages.

Require and check for said module, enough time has been wasted on this.

A list of just the most recent issues:
https://github.com/openwrt/packages/pull/16304
https://github.com/openwrt/packages/pull/16027
https://github.com/openwrt/packages/pull/15443
https://github.com/openwrt/packages/pull/14394
https://github.com/openwrt/packages/pull/12909
https://github.com/openwrt/packages/issues/12443
https://github.com/openwrt/packages/pull/11035
https://github.com/openwrt/packages/issues/10993

Signed-off-by: Andre Heider <a.heider@gmail.com>
2021-08-21 16:31:20 +02:00
Michael Siegenthaler
4b4fa2f9fe ramips: fix ethernet MAC address on Omega2
According to https://docs.onion.io/omega2-docs/mac-address.html, 0x28 is
the correct location to read the address on Onion Omega 2(+) devices.

This fixes a regression introduced by commit 77e850fe76 ("ramips: tidy up
MAC address setup for Linkit Smart and Omega2"), which was a cleanup that
intended to preserve existing behavior. In my testing with v19.07.7,
however, the MAC address determined from the device tree takes precedence
over the one set by 02_network, so the aforementioned commit actually
changed the behavior.

Signed-off-by: Michael Siegenthaler <msiegen@google.com>
[Adapt patch to nvmem usage]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-08-21 16:30:30 +02:00
Jan Hoffmann
9754b6ba6f ltq-vdsl/ltq-vdsl-app: clean up configure args
The userspace application now uses the model=full option to match the
configuration of the kernel module. The source no longer contains SOAP
support, which was the primary reason to build only typical instead
of full before.

This makes several CLI commands, which were already supported in the
kernel module, available in the userspace application. For example, this
includes bbsg which allows to get information about VDSL2 bands.

Some previously applied build options were redundant. Disabling ADSL MIB
support is unnecessary, as it only applies to Danube. ADSL LED support
is no longer included in the source. ReTx counters are already included
with model type full.

This increases the size of the userspace application by approximately
15 kB (uncompressed). The kernel module does not change at all.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2021-08-21 15:59:39 +02:00
Vincent Wiemann
c4a426746f firmware-utils: add support for ZyXEL ZLD firmware
This commit adds a tool for extracting and creating firmware archives for:
- ZyXEL NWA5121-N
- ZyXEL NWA5121-NI
- ZyXEL NWA5123-NI
- ZyXEL NWA5123-AC
- ZyXEL NWA5301
- ZyXEL NWA3560N v2
- ZyXEL WAC6100
- ZyXEL WAC6500

And maybe others...

Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
2021-08-21 15:59:39 +02:00
Fritz D. Ansel
65ee14a118 dropbear: allow to use with xinetd
with xinetd allowed+blocked (ipv6) hosts could be set
what is not possible with stock dropbear package

The file size increased 12 Bytes, so this "opimisation" did not really helped.
Within a compressed storage format it is 0..

ipk: 111.171 -> 111.361 = 190 bytes
bin: 215.128 -> 215.140 =  12 bytes

Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>
2021-08-21 15:59:39 +02:00
John Audia
f25cebc43c kernel: bump 5.4 to 5.4.142
Removed upstreamed:
  hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
2021-08-21 15:59:39 +02:00
John Audia
96369a68e7 kernel: bump 5.4 to 5.4.141
All patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
2021-08-21 15:59:39 +02:00
Rui Salvaterra
8408e0ff07 kernel: bump 5.10 to 5.10.60
No deleted or manually refreshed patches.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-21 15:59:39 +02:00
Rosen Penev
beddcfdc30 gdb: update to 10.2
Replace some OpenWrt patches with openembedded ones for easier
maintainability. Remove several outdated ones as well.

Replace PKG_RELEASE with AUTORELEASE to avoid manual bumps.

Remove !arc dependency as it is supported upstream now.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-08-21 15:59:39 +02:00
Daniel Golle
0d3f3323a2
mediatek: mt7623: enable more hardware features
In order to make HDMI console available on the BananaPi BPi-R2 select
various Kconfig symbols which are useful for systems with graphics.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-21 04:55:24 +01:00
Daniel Golle
7ca173d51a
uboot-mediatek: pass console=tty1 for BPi-R2
BananaPi BPi-R2 comes with HDMI and MIPI-DSI. Use dislpay facility in
Linux by add "console=tty1" boot argument.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-21 04:35:52 +01:00
Hauke Mehrtens
c18f91d118 kernel: Do not deactivate staging drivers
Do not deactivate the kernel configuration symbol CONFIG_STAGING in the
target configurations any more. This prevented the build of the exfat.ko
for example.

Fixes: FS#3979
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-08-21 01:10:17 +02:00
Hauke Mehrtens
469719b4b1 layerscape: Do not activate ext2 and ext3 driver options
The ext3 driver was already removed, the kernel config options are only
there for backwards compatibility. The eth4 driver takes care of ext3
file systems. The ext4 driver also handled ext2 file systems.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-08-21 00:11:50 +02:00
Hauke Mehrtens
7e757a09ec archs38: Do not activate ext3 driver options
The ext3 driver was already removed, the kernel config options are only
there for backwards compatibility. The eth4 driver takes care of ext3
file systems.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-08-21 00:11:50 +02:00
Hauke Mehrtens
fcfeb47eb0 at91bootstrap: Fix compile with binutils 2.36
This fixes a build problem seen after binutils 2.36 is used by default.

Fixes: 3f41153b1c ("toolchain/binutils: switch to version 2.36.1 by default")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-08-21 00:10:43 +02:00
Hauke Mehrtens
a1034afba8 uboot-at91: fix dtc compilation on host gcc 10
Backport a patch from upstream U-Boot to fix the compile with host GCC 10.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-08-21 00:07:54 +02:00
Stijn Tintel
718a4f4780 wolfssl: fix build with GCC 10 on 32 x86 targets
Backport upstream patch to fix build with GCC 10 on 32 x86 targets.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-08-20 23:45:20 +03:00
Adrian Schmutzler
05ccca031e mediatek: convert mtd-mac-address to nvmem for MT7629 RFB
This conversion appears to have been overlooked since it's in a
kernel patch.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-20 18:13:55 +02:00
Adrian Schmutzler
adb3e46616 lantiq: convert mtd-mac-address to nvmem for Fritz!Box 736x
Convert this series by moving the definitions to the individual
devices.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-20 18:13:55 +02:00
Adrian Schmutzler
8a78d61299 ramips: convert mtd-mac-address to nvmem for UniElec devices
Convert this series by moving the definitions to the individual
devices.

Now all devices on ramips are converted.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-20 18:13:55 +02:00
Adrian Schmutzler
41aa765946 ath79: remove redundant nvmem definitions
Due to use of a script when migrating from mtd-mac-address, a few
of the definitions are redundant in DTSI and DTS files. Remove
those and consolidate the definitions in parent DTSI files in a
few cases.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-20 18:13:55 +02:00
Adrian Schmutzler
f13c7a56f0 ramips: remove redundant nvmem definitions
Due to use of a script when migrating from mtd-mac-address, a few
of the definitions are redundant in DTSI and DTS files. Remove
those.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-20 18:13:50 +02:00
Adrian Schmutzler
9cb5853592 ramips: fix indent in DTS for GL.iNet VIXMINI/microuter-N300
Use correct indent.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-20 18:10:48 +02:00
Adrian Schmutzler
7f1b0f68f1 ramips: convert mtd-mac-address to nvmem for D-Link DIR-8xx
Convert this series by moving the definitions to the individual
devices.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-20 18:10:48 +02:00
Daniel Golle
cc0112d9d7
selinux-policy: update to version 0.9
592ac0f add a note
 4bacd14 sslcertfile: list /etc/ssl
 7bdefa4 example: indicate that skip is an option
 d1e9a85 wifi: sys pipe usage
 eb903e1 README: add note about policycoreutils-setfiles weak dependency
 762e011 ttyd: signull all subjects
 fbfc079 acme: add basic support for acme_cleanup.sh and acme_setup.sh
 9ac7592 acme: transition to sys.subj on generic initscript execution
 f3dd1ba acme: missing rules related to sys.subj trans on file.initscriptfile
 ae273fa odhcp6c/netifd: support drop-in directories
 5fa9b41 subj: do not encourage misconfiguration
 44722b6 blockd, logd, odhcpc6, ubiutil, mtdstordev
 a775d93 21.02 related
 a473691 rcboot runs rcuhttpd which creates /tmp/etc for /tmp/etc/uhttpd
 290e9fb rcuhttpd: related to rcboot and uci-defaults
 3fc0d8b rcuhttpd: lists /etc/uci-defaults
 1f5ef48 removes ubvol.lock policy and adds move mtd/ubi partitions

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-20 01:48:13 +01:00
Daniel Golle
c5616a8ae1
image: fix build with SELinux
The option '-xattr' for mksquashfs4 should be '-xattrs' which lead to
build failure with SELinux enabled. Add the missing 's'.

Fixes: 4baf47b9a8 ("images: squashfs: xattrs should not depend on buld host")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-19 01:37:35 +01:00
Adrian Schmutzler
e826b64294 ath79: convert remaining mtd-mac-address cases to nvmem
Since the nvmem-based approach for retrieving MAC addresses
appears to depend on the addresses being set up after the
partitions, it is no longer possible to keep the MAC address
setup in shared DTSI files while the partitions itself are
set up in DTS files for the individual devices.

In ath79 the firmware partition is typically located somewhere
"in the middle" of the partition table. Thus, it's not trivial
to share the partitions containing MAC address information in
a common DTSI (like we did in some cases on ramips).

In this commit, MAC address setup is thus moved to the relevant
partitions, and in most cases needs to be duplicated. While
the duplication is not really nice, it eventually provides a
cleaner and more tidy setup, making the DTS(I) file
fragmentation a bit more logical. This should also help
with adding new devices, as information is distributed across
less locations.

For consistency, this commit also moves the mtd-cal-data property
"down" together with the MAC address setup, so it's not based
on a partition before the latter is defined either. (This is
only done for those files touched due to nvmem conversion.)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-18 23:46:02 +02:00
Adrian Schmutzler
ba3d92c5a0 ramips: convert most mtd-mac-address cases in DTSI to nvmem
Convert most of the cases from mtd-mac-address to nvmem where
MAC addresses are set in the DTSI, but the partitions are only
located in the device DTS. This posed some problems earlier, since
in these cases we are using partitions before they are defined,
and the nvmem system did not seem to like that.

There have been a few different resolution approaches, based on
the different tradeoffs of deduplication vs. maintainability:

 1. In many cases, the partition tables were identical except for
    the firmware partition size, and the firmware partition was
    the last in the table.
    In these cases, the partition table has been moved to the
    DTSI, and only the firmware partition's "reg" property has
    been kept in the DTS files. So, the updated nvmem definition
    could stay in the DTSI files as well.

 2. For all other cases, splitting up the partition table would
    have introduced additional complexity. Thus, the nodes to be
    converted to nvmem have been moved to the DTS files where the
    partitioning was defined.

 3. For Netgear EX2700 and WN3000RP v3, the remaining DTSI file
    was completely dissolved, as it was quite small and the name
    was not really nice either.

 4. The D-Link DIR-853 A3 was converted to nvmem as well, though
    it is just a plain DTS file not taken care of in the first
    wave.

In addition, some minor rearrangements have been made for tidyness.

Not covered (yet) by this patch are:

 * Various unielec devices
 * The D-Link DIR-8xx family

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-18 23:46:02 +02:00
Michael Heimpold
9a79fe20e8 bcm27xx-userland: factor out a -dev package
Installing headers and static libraries to the target system seems
to be not required for most use cases, so let's factor them
out into a dedicated -dev package.

This cuts down to disk usage to around 50% of the original
package to ~ 2MB - not that disk space is an issue normally,
but when using inside an initramfs only project, it counts.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2021-08-18 20:20:13 +02:00
Stijn Tintel
6d0cefcf42 toolchain/gcc: switch to version 10 by default
Runtime-tested on:
* ath79
* bcm27xx/bcm2708
* bcm27xx/bcm2709
* bcm27xx/bcm2711
* mvebu/cortexa53
* octeon
* realtek
* x86/64

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-08-18 20:48:53 +03:00
Stijn Tintel
3f41153b1c toolchain/binutils: switch to version 2.36.1 by default
Runtime-tested on:
* ath79
* bcm27xx/bcm2708
* bcm27xx/bcm2709
* bcm27xx/bcm2711
* mvebu/cortexa53
* octeon
* realtek
* x86/64

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-08-18 20:48:47 +03:00
Stijn Tintel
959838ed03 umbim: bump to git HEAD
de56231 umbim: fix compilation with GCC 10

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-08-18 20:48:42 +03:00
Stijn Tintel
8ae3d5f9ca busybox: fix compilation with GCC 10
When compiling busybox with GCC 10 and CONFIG_PKG_ASLR_PIE_ALL=y, there
are hundreds of errors like:

relocation R_MIPS16_26 against `xzalloc' cannot be used when making a
shared object; recompile with -fPIC

Simply solve this by no longer disabling PKG_ASLR_PIE, so that $(FPIC)
is properly added to the CFLAGS and LDFLAGS.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-08-18 20:48:38 +03:00
Stijn Tintel
a43da1be43 ipq40xx: fix Edgecore ECW5211 boot
The bootloader will look for a configuration section named ap.dk01.1-c2
in the FIT image. If this doesn't exist, the device won't boot.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-08-18 16:11:11 +03:00
David Yang
efca67983d ramips: add WPS button for newifi d1
This device has a WPS button under WiFi antenna cover, add it to dts.

Signed-off-by: David Yang <mmyangfl@gmail.com>
2021-08-17 18:41:17 +02:00
Adrian Schmutzler
ad6b077049 ramips: mt7628: move mtd-eeprom out of root DTSI
The mt76x8 subtarget is the only one in ramips that stores the
mediatek,mtd-eeprom property directly in the "root" mt7628an.dtsi.

This is not optimal for a few different reasons:

 * If you don't really know it or are used to other (sub)targets,
   the property will be set somewhat magically.
 * The property is set based on &factory partition before (if at all)
   this partition is defined.
 * There are several devices that have different offset or even
   different partitions to read from, which will then be overwritten
   in the DTS files. Thus, definitions are scattered between root
   DTSI and individual files.

Based on these circumstances, the "root" definition is removed and
the property is added to the device-based DTS(I) files where needed
and applicable. This should be easier to grasp for unexperienced
developers and will move the property closer to the partition
definitions.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-17 18:41:17 +02:00