Commit Graph

48158 Commits

Author SHA1 Message Date
Adrian Schmutzler
883250014d ipq806x: move serial0 to DTSI files
All device DTS files in the target set the serial0 property to the
same value (*). So, let's move the definitions to the DTSI files.

That's also where the kernel defines it (qcom-ipq8064-v1.0.dtsi).

* The only exception is ipq8064-db149, which defines
  "serial0 = &uart2;", but inside a block called "alias" instead of
  "aliases". It must be assumed that this is broken anyway, so we
  don't touch it here.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-06 16:24:30 +02:00
Adrian Schmutzler
74e339f118 ipq806x: move stdout-path to DTSI files
All device DTS files in the target set the stdout-path to the same
value. So, let's move the definitions to the DTSI files.

That's also where the kernel defines it (qcom-ipq8064-v1.0.dtsi).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-06 16:23:23 +02:00
Adrian Schmutzler
ed761344d2 ipq806x: disentangle and clean up SoC DTSI files
So far, the DTSI files on ipq806x had a linear inheritance:

  qcom-ipq8064.dtsi
  v
  qcom-ipq8064-v1.0.dtsi
  v
  qcom-ipq8064-v2.0.dtsi
  v
  qcom-ipq8065.dtsi

This poses problems when one wants to set something that is specific
to an architecture closer to the top of the tree.

In this patch, we remove the chain-like inheritance and have all
other files derived from qcom-ipq8064.dtsi (changing this name to
something more generic is not possible due to upstream use).

The removal of inheritance will require a few entries to be copied
from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also
opens an opportunity for some clean-up:

- Many definitions can be improved by just using the innermost labels.

- Instead of disabling the CPU_SPC node for ipq8065, it is now off by
  default and enabled where needed.

- Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and
  then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have
  the appropriate settings done in the lower DTSI files directly.

- For the opp_table0 adjustments for ipq8065, just redefine what's
  changed, but don't add all the untouched properties again.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-06 16:21:15 +02:00
Sungbo Eo
19c8f11d92 ipq806x: move common pinmux nodes to SoC DTSI
As almost same pinmux nodes are repeated in each device dts,
let's define them once in the ipq8064 dtsi and remove the rest.

* uart0_pins : Did not touch.
* i2c4_pins  : This node seems to be not used at all in dts.
               Added the most common form in the dtsi. Did not touch rpm_pins.
* spi_pins   : The common mux node is already present in the dtsi.
               Removed the duplicate nodes from dts.
* nand_pins  : Moved the entire node.
* mdio0_pins : Moved the common mux node.
* rgmii2_pins: Moved the common mux node. "pins" property is overrided in ap161.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-07-06 16:08:18 +02:00
Hauke Mehrtens
014d3f593a ar71xx: Fix mikrotik NAND compile problem
There is one closing bracket too much.

Fixes: ce958dd88a ("kernel: Update kernel 4.14 to version 4.14.187")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-06 00:07:38 +02:00
John Audia
556eb9872d linux-firmware: Update linux-firmware to 20200619
git log --pretty=oneline --abbrev-commit 20200122..20200619

e96c121 (tag: 20200619, origin/main) amdgpu: update renoir firmware from 20.20 release
db0402e amdgpu: update picasso firmware from 20.20 release
c4e6e8f amdgpu: update raven2 firmware from 20.20 release
1967282 amdgpu: update raven firmware from 20.20 release
f73f82c amdgpu: add vega20 TA firmware from 20.20 release
9ecaba8 amdgpu: update vega20 firmware from 20.20 release
3866af1 amdgpu: update vega12 firmware from 20.20 release
adba945 amdgpu: update vega10 firmware from 20.20 release
3c5eef0 amdgpu: update navi10 firmware from 20.20 release
152c929 amdgpu: update navi14 firmware from 20.20 release
3890db3 (HEAD -> master, origin/master, origin/HEAD) rtl_nic: add firmware for RTL8125B
887d2a1 linux-firmware: Update firmware file for Intel Bluetooth AX200
3914943 linux-firmware: Update firmware file for Intel Bluetooth AX201
4966923 linux-firmware: Update firmware file for Intel Bluetooth 9560
5ee82c0 linux-firmware: Update firmware file for Intel Bluetooth 9260
d9880b1 Mellanox: Add new mlxsw_spectrum firmware xx.2007.1168
c2e313b rtw88: RTL8822C: update firmware version to v9.9
4d91664 Merge branch 'mrvl-prestera' of https://github.com/PLVision/linux-firmware
a54dfbe Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
51a773d cxgb4: Update firmware to revision 1.24.17.0
5611000 mrvl: add firmware for Prestera ASIC devices
8ba6fa6 (tag: 20200519) Merge tag 'iwlwifi-fw-2020-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
5ee1c7d iwlwifi: update and add new FWs from core50-70 and core52-81 releases
401bd6d rtw88: RTL8821C: add firmware file v24.5
2ae9974 iwlwifi: update FWs to core47-142 release
50c1340 iwlwifi: update 8265 FW
f8d32e4 rtw88: update firmware information and README
412f95a linux-firmware: add firmware for MT7915E
619d339 QCA: Add Bluetooth firmware for QCA9377
1392591 linux-firmware: add rebb firmware for mt7663
b2cad6a linux-firmware: Update firmware file for Intel Bluetooth AX200
c5ac1ad linux-firmware: Update firmware file for Intel Bluetooth AX201
642d115 linux-firmware: Update firmware file for Intel Bluetooth 9560
dc3047c linux-firmware: Update firmware file for Intel Bluetooth 9260
78c0348 (tag: 20200421) Use Link function for brcmfmac43362-sdio.lemaker,bananapro.txt
f2df706 Add symlink for Dell XPS 15 9550 Broadcom Bluetooth patch-ram file
87dcb0e rtl_bt: Update RTL8822C BT FW to 0x0999_3AA1
3aa3ae4 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
8aa36f5 cxgb4: Update T6 config file
6314fa0 amdgpu: update vega20 firmware for 20.10
1f308f1 amdgpu: update vega12 firmware for 20.10
1ffd569 amdgpu: update vega10 firmware for 20.10
9a0b0f4 amdgpu: update renoir firmware for 20.10
428a747 amdgpu: update raven2 firmware for 20.10
624ecdf amdgpu: update raven firmware for 20.10
7532f50 amdgpu: update picasso firmware for 20.10
75e352e amdgpu: update navi10 firmware for 20.10
3c175d1 amdgpu: update navi14 firmware for 20.10
8d7ac32 amdgpu: add navi14 TA firmware from 20.10
dd6b4db Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
3afe520 cxgb4: Update firmware to revision 1.24.14.0
64dba0f Merge branch 'a630-zap' of https://github.com/andersson/linux-firmware
236ec45 linux-firmware: add firmware for MT7663 Wifi/BT combo device
107b9a2 Merge https://github.com/bgodavar/qca_bt_fw
5b240e5 Merge https://github.com/rjliao-qca/qca-btfw
47533bc linux-firmware: Update firmware file for Intel Bluetooth AX200
677930a linux-firmware: Update firmware file for Intel Bluetooth AX201
e6ff1e7 qcom: Add SDM845 Adreno ZAP shader firmware
1a8b0dc qca: Enable transparent WBS for WCN3991
4921f73 QCA: Add Bluetooth firmware for QCA6390
edf390c Merge branch 'v12573.77' of https://github.com/erinlo/linux_fw_scp
3c213aa mediatek: Add mt8183 SCP firmware
8eb0b28 (tag: 20200316) linux-firmware: Update firmware file for Intel Bluetooth AX200
b9f720f linux-firmware: Update firmware file for Intel Bluetooth AX201
426db50 linux-firmware: Update firmware file for Intel Bluetooth 9560
9361709 linux-firmware: Update firmware file for Intel Bluetooth 9260
3b3dd5a amdgpu: update vega20 firmware from 19.50
4871e7a amdgpu: update vega12 firmware from 19.50
4e7f0f8 amdgpu: update vega10 firmware from 19.50
fce60a9 rtl_bt: Add firmware and configuration files for RTL8822C BT UART chip
d553c05 Merge branch 'tgl_huc_7.0.12_dmc_2.06' of git://anongit.freedesktop.org/drm/drm-firmware
fb83402 i915: Add DMC firmware v2.06 for TGL
45d36b5 i915: add HuC firmware v7.0.12 for TGL
0148cfe Merge https://github.com/rjliao-qca/qca-btfw
94cb0a6 check_whence: python3/utf-8 support
7fa32bc Makefile: improve `make check` usefulness
4bb6805 mediatek: Remove in-tree symlinks
6f50efe Merge branch 'v1.1.4' of https://github.com/ruiwang-mtk/linux_fw_vpu
2db3978 qca: Fix blueooth firmware name for QCA6174
a8a18d1 mediatek: move MT8173 VPU FW to subfolder
efcfa03 linux-firmware: Update firmware file for Intel Bluetooth AX201
83cb43e Merge https://github.com/bgodavar/qca_bt_wcn3991
54b017d qca: Add firmware files for BT chip wcn3991.
2277987 nvidia: add TU116/117 signed firmware
f63922d drm/amdgpu: update to latest 19.50 firmware for raven
1168a90 Merge branch 'v1.1.4' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.4
0bd965d mediatek: update MT8173 VPU firmware to v1.1.4
6f89735 rtl_nic: update firmware for RTL8153A
5351afe rtl_bt: Update RTL8822C BT FW to V0x0998_C2B4
83a7c50 linux-firmware: add firmware for MT7622
feb91a4 linux-firmware: add version 2 for MT7615E
b791e15 amdgpu: update to latest navi10 firmware from 19.50
0ff2f37 Revert "radeon: update oland rlc microcode from amdgpu"
c2df39a Merge branch 'amlogic-vdec' of https://github.com/Elyotna/linux-firmware
fb505a6 amlogic: update video decoder firmwares
6d9f399 amdgpu: add renoir firmware for 19.50
2c08b38 amdgpu: update raven2 firmware for 19.50
8846543 Merge commit '779514ec044a75ee6c9c20e52a2bf291f80d7d4e' of https://github.com/Netronome/linux-firmware
74d71b6 Merge branch 'bt-20200122' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware
779514e nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.12.A.13
3055060 qca: update bluetooth firmware for QCA6174

Signed-off-by: John Audia <graysky@archlinux.us>
2020-07-04 21:12:42 +02:00
Scott Roberts
d31bbe40e2 mvebu: config define i2c pxa slave
We are setting CONFIG_I2C_PXA is not set
If you do set pxa to y then you have issues if you do not have
CONFIG_I2C_PXA_SLAVE is not set

Fixes: dd13add3ce ("kernel: i2c-pxa: remove slave")
Signed-off-by: Scott Roberts <ttocsr@gmail.com>
2020-07-04 21:12:42 +02:00
Daniel González Cabanelas
a902e6a657 mvebu: LS421DE: use automatic fan control with thermal zones
The Buffalo Linkstation LS421DE has a chassis fan for cooling two internal
hard drives. Currently there is no control over this fan, running always
at fixed medium speed.

With the recent jump to the kernel 5.4, now we can monitor the hard drive
temperature and control the fan with thermal zones.

Install the kmod-hwmon-drivetemp module and wire up a thermal zone on the
dts file to allow automatic fan control by the kernel.

Tested succesfully using a single Crucial BX500 SSD drive.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2020-07-04 21:12:42 +02:00
Hauke Mehrtens
68d9cb8214 kernel: Update kernel 5.4 to version 5.4.50
Run tested: ath79, ipq40xx
Build tested: ath79, ipq40xx

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-04 21:12:42 +02:00
Hauke Mehrtens
6062d85892 kernel: Update kernel 4.19 to version 4.19.131
Fixes:
- CVE-2020-10757

The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was
backported which needed some adaptations to other code.

Run tested: ath79
Build tested: ath79

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-04 21:12:42 +02:00
Hauke Mehrtens
ce958dd88a kernel: Update kernel 4.14 to version 4.14.187
Fixes:
- CVE-2020-10757

The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was
backported which needed some adaptations to other code.

Build tested: ramips

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-04 21:12:42 +02:00
DENG Qingfang
78b632134f libjson-c: update to 0.14
Update libjson-c to 0.14
Changelog: https://github.com/json-c/json-c/wiki/Notes-for-v0.14-release

Switch to CMake because the upstream build system was changed

ipk size increased by 2KB

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-07-04 21:00:11 +02:00
Hauke Mehrtens
4bb5e331a7 kernel: Fix ath79 DSP exception at bootup
This resolves a hazard between a mtc0 and a mfc0 instruction after
activating the DSP support. Without this fix the CPU could use the old
value again and the DSP support would not be active.

Fixes: FS#2928, FS#2899
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ath79/tl-wdr3600; ath79/tl-wdr4300]
Tested-by: David Bauer <mail@david-bauer.net> [ocedo_koala/ocedo_raccoon]
2020-07-04 16:04:21 +02:00
Daniel Golle
3b0f698760 build,json: fix build failure in case no data is found
Only collect arch_packages if actually generating any output.

Fixes: commit f09b9319 ("build,json: store arch_packages in profiles.json"(
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-07-03 22:09:24 +01:00
Antti Seppälä
a175bc8f36 ath79: add support for GL.iNet GL-MiFi
Add support for the ar71xx supported GL.iNet GL-MiFi to ath79.

Specifications:
 - Atheros AR9331
 - 64 MB of RAM
 - 16 MB of FLASH (SPI NOR)
 - 2x 10/100/1000 Mbps Ethernet
 - 2.4GHz (AR9330), 802.11b/g/n
 - 1x USB 2.0 (vbus driven by GPIO)
 - 4x LED, driven by GPIO
 - 1x button (reset)
 - 1x mini pci-e slot (vcc driven by GPIO)

Flash instructions:

Vendor software is based on openwrt so you can flash the sysupgrade
image via the vendor GUI or using command line sysupgrade utility.
Make sure to not save configuration over reflash as uci settings
differ between versions.

Note on MAC addresses:

Even though the platform is capable to providing separate MAC addresses
to the interfaces vendor firmware does not seem to take advantage of
that. It appears that there is only single unique pre-programmed
address in the art partition and vendor firmware uses that for
every interface (eth0/eth1/wlan0). Similar behaviour has also been
implemented in this patch.

Note on GPIOs:

In vendor firmware the gpio controlling mini pci-e slot is named
3gcontrol while it actually controls power supply to the entire mini
pci-e slot. Therefore a more descriptive name (minipcie) was chosen.
Also during development of this patch it became apparent that the
polarity of the signal is actually active low rather than active high
that can be found in vendor firmware.

Acknowledgements:

This patch is based on earlier work[1] done by Kyson Lok. Since the
initial mailing-list submission the patch has been modified to comply
with current openwrt naming schemes and dts conventions.

[1] http://lists.openwrt.org/pipermail/openwrt-devel/2018-September/019576.html

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
2020-07-03 20:48:05 +02:00
John Audia
472f5b1474 ipq806x: refresh config
Based on "make kernel_menuconfig CONFIG_TARGET=generic" and 5.4.49

CONFIG_LEDS_TRIGGER_DISK has been removed by the refresh and added
back manually in order to not revert f93fcf8923 ("ipq806x: enable
disk-activity LED trigger").

Signed-off-by: John Audia <graysky@archlinux.us>
[extend commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 20:38:06 +02:00
Sungbo Eo
91472dc2ce kirkwood: support for button in Pogoplug V4
Pogoplug V4 has a reset button on a GPIO pin.
To use it, kmod-gpio-button-hotplug package needs to be installed.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-07-03 19:48:51 +02:00
Adrian Schmutzler
b123ffdf6e ath79: drop redundant status for gpio target-wide
All definitions of gpio in SoC DTSI files do not set status, i.e.
have it enabled. This drops all remaining redundant "status = okay"
definitions in descendent files (mostly older ones).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 17:37:02 +02:00
Adrian Schmutzler
dc1280ef65 ath79: enable gpio on ar933x by default
All other SoC DTSI files have gpio enabled by default, only
ar9330/ar9331 disable it by default, only to have it enabled again
afterwards for each individual device.

So, do not disable it in the first place, and drop all device-specific
status statements afterwards.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 17:37:02 +02:00
Leon M. George
a0bb356612 ath79: add support for Compex WPJ344
Specifications:

SoC: AR9344
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
2 Gigabit ethernet ports
2×2 2.4GHz on-board radio
miniPCIe slot that supports 5GHz radio
PoE 48V IEEE 802.3af/at - 24V passive optional
USB 2.0 header

Installation:

To install, either start tftp in bin/targets/ath79/generic/ and use
the u-boot prompt over UART:

tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj344-16m-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
erase 0x9f680000 +1
cp.b $fileaddr 0x9f030000 $filesize
boot

The cpximg file can be used with sysupgrade in the stock firmware (add
SSH key in luci for root access) or with the built-in cpximg loader.
The cpximg loader can be started either by holding the reset button
during power up or by entering the u-boot prompt and entering 'cpximg'.
Once it's running, a TFTP-server under 192.168.1.1 will accept the image
appropriate for the board revision that is etched on the board.

For example, if the board is labelled '6A08':

tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj344-16m-squashfs-cpximg-6a08.bin

MAC addresses:

<&uboot 0x2e010>  *:99  (label)
<&uboot 0x2e018>  *:9a
<&uboot 0x2e020>  *:9b
<&uboot 0x2e028>  *:9c

Only the first two are used (for ethernet), the WiFi modules have
separate (valid) addresses. The latter two addresses are not used.

Signed-off-by: Leon M. George <leon@georgemail.eu>
[minor commit message adjustments, drop gpio in DTS, DTS style fixes,
sorting, drop unused cpximg recipe]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 17:37:02 +02:00
Paul Spooren
f09b9319c6 build,json: store arch_packages in profiles.json
The `arch_packages` contains the supported package architecture.

Previously it was necessary to parse the `Packages` index for the line
`Architecture:`, requiring both an additional parser and file download.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-07-03 15:28:05 +01:00
Hans Dedecker
9858a8c582 odhcpd: bump to latest git HEAD
5da5299 odhcpd: fix compilation with GCC10

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-07-02 22:28:06 +02:00
Sungbo Eo
736995ce19 ath79: rearrange nand node by register address
All other nodes in the DTS are placed in order of address space. Harmonize
the nand nodes as well.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-07-02 21:34:37 +02:00
Hans Dedecker
cbb66f9edb curl: bump to 7.71.0
For changes in 7.71.0; see https://curl.haxx.se/changes.html#7_71_0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-07-01 22:19:50 +02:00
Álvaro Fernández Rojas
f786de2095 ath10k-ct: update to version 2020-06-30
Backports commit "a1769bb68a850508a492e3674ab1e5e479b11254", which reverts
upstream commit "76d164f582150fd0259ec0fcbc485470bcd8033e" (ath10k: fix DMA
related firmware crashes on multiple devices).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-07-01 15:39:15 +02:00
Paul Spooren
263f7e5bbd build: store default/device packages in JSON
With this commit the `profiles.json` contain both the target specific
`default_packages` as well as the device specific `device_packages` as a
array of strings.

This information is required for downstream projects like the various
web-based interactive firmware generators.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-06-30 23:21:10 +01:00
Hans Dedecker
d4c80f5b17 dropbear: bump to 2020.80
- drop patches (applied upstream)
 * 001-backport_GNU_SOURCE-for-random.patch
 * 002-backport-move-GNU_SOURCE-earlier.patch
 * 010-backport-disable-toom-and-karatsuba.patch

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-06-30 22:13:46 +02:00
Rui Salvaterra
835c932ccb zram-swap: init: replace backticks with $()
This replaces deprecated backticks by more versatile $(...) syntax.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[add commit description]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-30 19:03:15 +02:00
Rui Salvaterra
69ca308673 dropbear: init: replace backticks with $()
This replaces deprecated backticks by more versatile $(...) syntax.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[add commit description]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-30 19:01:18 +02:00
Rowan Border
33fae8421e ramips: add support for TP-Link RE220 v2
TP-Link RE220 v2 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN.

This port of OpenWRT leverages work done by Andreas Böhler <dev@aboehler.at>
for the TP-Link RE200 v2 as both devices share the same SoC, flash layout
and GPIO pinout.

Specifications

MediaTek MT7628AN (580 Mhz)
64 MB of RAM
8 MB of FLASH
2T2R 2.4 GHz and 1T1R 5 GHz
1x 10/100 Mbps Ethernet
UART header on PCB (57600 8n1)
8x LED (GPIO-controlled), 2x button
There are 2.4G and 5G LEDs in red and green which are controlled separately.

Web Interface Installation

It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.

Signed-off-by: Rowan Border <rowanjborder@gmail.com>
2020-06-30 17:23:32 +02:00
Kevin Darbyshire-Bryant
d59dc14515 kernel: cake: backport upstream tweaks & fixes
From upstream:
b8392808eb3f sch_cake: add RFC 8622 LE PHB support to CAKE diffserv handling
3f608f0c4136 sch_cake: fix a few style nits
8c95eca0bb8c sch_cake: don't call diffserv parsing code when it is not needed
9208d2863ac6 sch_cake: don't try to reallocate or unshare skb unconditionally

From netdev not yet accepted:
sch_cake: fix IP protocol handling in the presence of VLAN tags

The VLAN tag handling is actually wider than just cake so upstream are
working out how to fix it generically.  We fix it here just for cake.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 16:09:18 +01:00
Kevin Darbyshire-Bryant
77cd8f64ca kernel: cake: backport unused var patch to 5.4
This was backported to 4.19 and I clearly expected it to land in 5.4 but
it didn't (5.5) so backport it to 5.4 for consistency.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 09:34:24 +01:00
Kevin Darbyshire-Bryant
4ca4c94267 kernel: cake: skb hash backport to 419
Commit 7b4877c204 backported to 5.4 only,
backport to 4.19 as well.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 09:34:17 +01:00
Kevin Darbyshire-Bryant
3fda01a51e kernel: cake: renumber backport patches
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 09:34:06 +01:00
David Bauer
5667ccbf16 ramips: remove duplicate MAC assignment case
Cudy WR1000 and Wavlink WL-WN577A2 store WAN as well as label MAC address
at the same position in flash.

Suggested-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-06-29 15:55:55 +02:00
David Bauer
1ba0466d43 package: add ravpower-mcu package
This package allows to read battery status information and control the
power state of the RAVPower RP-WD009 power management IC.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-06-29 12:24:04 +02:00
David Bauer
e959048c12 ramips: add support for RAVPower RP-WD009
The RAVPower RP-WD009 is a batter-powered pocket sized router with SD
card lot and USB port.

Hardware
--------
CPU:   MediaTek MT7628AN
RAM:   64M DDR2
FLASH: 16M GigaDevices SPI-NOR
WLAN:  MediaTek MT7628AN 2T2R b/g/n
       MediaTek MT7610E  1T1R n/ac
ETH:   1x FastEthernet
SD:    SD Card slot
USB:   USB 2.0

Custom PMIC on the I2C bus (address 0x0a).

Installation
------------

1. Press and hold down the reset button.

2. Power up the Device. Keep pressing the reset button for 10
   more seconds until the Globe LED lights up.

3. Attach your Computer to the Ethernet port. Assign yourself the
   address 10.10.10.1/24.

4. Access the recovery page at 10.10.10.128 and upload the OpenWrt
   factory image.

5. The flashing will take around 1 minute. The device will reboot
   automatically into OpenWrt.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-06-29 12:24:01 +02:00
David Bauer
f49063ba92 ath79: replace custom uImageArcher generation
The replaces the custom uImageArcher build step with the generic uImage
build step. The only different between these two is the difference in
the generated name.

Tested on: TP-Link Archer C59 v1

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-06-29 01:08:09 +02:00
Lars Wessels
dbaf0d20bb ramips: add support for WAVLINK WL-WN577A2
This commit adds support for the Wavlink WL-WN577A2 (black case) dual-band
wall-plug wireless router. In Germany this device is sold under the brand
name Maginon WL-755 (white case):

Device specifications:

- CPU: MediaTek MT7628AN (580MHz)
- Flash: 8MB
- RAM: 64MB
- Bootloader: U-Boot
- Ethernet: 2x 10/100 Mbps (Ralink RT3050)
- 2.4 GHz: 802.11b/g/n SoC
- 5 GHz: 802.11a/n/ac MT7610E
- Antennas: internal
- 4 green LEDs: 1 programmable (WPS) + LAN, WAN, POWER
- Buttons: Reset, WPS
- Small sliding power switch

Flashing instructions (U-boot):

- Configure a TFTP server on your PC/Laptop and set its IP
  to 192.168.10.100

- Rename the OpenWrt image to firmware.bin and place it in the
  root folder of the TFTP server

- Power off (using the small sliding power switch on the left
  side) the device and connect an ethernet cable from its LAN
  or WAN port to your PC/Laptop

- Press the WPS button (and keep it pressed)

- Power on the device (using the small power switch)

- After a few seconds, when the WAN/LAN LED stops blinking
  very fast, release the WPS button

- Flashing OpenWrt takes less than a minute, system will
  reboot automatically

- After reboot the WPS LED will indicate the current OpenWrt
  running status

Signed-off-by: Lars Wessels <software@bytebox.org>
[removed unused labels - fix whitespace errors - wrap commit message]
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-06-29 01:08:01 +02:00
Adrian Schmutzler
5234593462 mvebu: move definition of factory.img out of Device/Default
The Device/Default definition in mvebu defines an IMAGE/factory.img
which is not included in IMAGES, and only used twice in the
individual definitions. Move it out of the default definition
to keep it closer to the reassignment of IMAGES and make it more
consistent with respect to other values of IMAGE/factory.img

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-28 14:07:57 +02:00
Adrian Schmutzler
0127de9547 ipq806x: set IMAGES in Device/Default definition
The Device/Default definition sets a default IMAGE/sysupgrade.bin,
but does not enable it by setting IMAGES. This is not consistent,
and has led to IMAGES being defined at various other places in the
file.

Thus, this patch consolidates the default value for IMAGES by putting
it in Device/Default. Since it's still overwritten where necessary,
this patch is cosmetic.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-28 14:07:50 +02:00
Adrian Schmutzler
e8afeaabc0 ipq40xx: set IMAGES in Device/Default definition
The Device/Default definition sets a default IMAGE/sysupgrade.bin,
but does not enable it by setting IMAGES. This is not consistent,
and has led to IMAGES being defined at various other places in the
file.

Thus, this patch consolidates the default value for IMAGES by putting
it in Device/Default. Since it's still overwritten where necessary,
this patch is cosmetic.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-28 14:07:43 +02:00
Sungbo Eo
7da3c3b491 firmware-utils: sort tools alphabetically
Also remove leading whitespace after comma.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-06-28 02:27:36 +02:00
Adrian Schmutzler
8819faff47 ath79: do not build TP-Link tiny images by default
For quite some time, the tiny (4M flash) TP-Link sysupgrade and
factory images cannot be built anymore by the buildbots, just
the initramfs-kernel.bin files are still there.

Disable these images for the buildbots and prevent useless builds.

Note that these devices still build fine with default settings,
even for kernel 5.4.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-28 00:33:44 +02:00
Adrian Schmutzler
89bb4ee450 mvebu: remove non-existant board name solidrun,clearfog-a1
In 02_network, the board name solidrun,clearfog-a1 is used in a
case, but it does not seem to be used/exist anywhere else in OpenWrt.

The valid strings are:
- solidrun,clearfog-pro-a1
- solidrun,clearfog-base-a1

Fixes: 12795ec9f1 ("mvebu: split interface configuration for
clearfog pro and base")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-28 00:32:29 +02:00
Leon M. George
9f261e36de ath79: build Compex WPJ531 cpximg files
Generate additional images that are compatible to the cpximg loader.
The cpximg loader can be started either by holding the reset button during
power up or by entering the u-boot prompt and entering 'cpximg'.
Once it's running, a TFTP-server under 192.168.1.1 will accept the image
appropriate for the board revision that is etched on the board.

For example, if the board is labelled '7A04':

tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj531-16m-squashfs-cpximg-7A04.bin

These files can also be used with the sysupgrade utility in stock images (add
SSH key in luci for root access).

Signed-off-by: Leon M. George <leon@georgemail.eu>
[fix sorting of definitions]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-28 00:26:39 +02:00
Leon M. George
e10dd48360 ath79: add support for Compex WPJ531 (16M)
Specifications:

SoC: QCA9531
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
2 100MBit ethernet ports
2×2 2.4GHz on-board radio
miniPCIe slot that supports 5GHz radio
PoE 24V - 48V IEEE 802.3af optional
USB 2.0 header

Installation:

To install, start a tftp server in bin/targets/ath79/generic/ and use the
u-boot prompt over UART:

tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj531-16m-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
erase 0x9f680000 +1
cp.b $fileaddr 0x9f030000 $filesize
boot

The cpximg file can be used with sysupgrade in the stock firmware (add SSH key
in luci for root access).

Another way is to hold the reset button during power up or running 'cpximg' in
the u-boot prompt.
Once the last LED starts flashing regularly, a TFTP-server under 192.168.1.1
will accept the image appropriate for the board revision that is etched on the
board.

For example, if the board is labelled '7A04':

tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj531-16m-squashfs-cpximg-7A04.bin

MAC addresses:

<&uboot 0x2e010>  *:cb  (label)
<&uboot 0x2e018>  *:cc
<&uboot 0x2e020>  *:cd
<&uboot 0x2e028>  *:ce

Only the first two are used (for ethernet), the WiFi modules have
separate (valid) addresses. The latter two addresses are not used.

Signed-off-by: Leon M. George <leon@georgemail.eu>
[commit title/message facelift, fix rssileds, add led aliases]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-28 00:26:39 +02:00
Hauke Mehrtens
143c81716d uboot-kirkwood: Revert "uboot-kirkwood: enable sata in nsa310 uboot"
This reverts commit 930f3c0148.

The build fails with the following build error:
arm-openwrt-linux-muslgnueabi-ld.bfd: drivers/built-in.o: in function `ide_init':
build_dir/target-arm_xscale_musl_eabi/u-boot-nsa310/u-boot-2020.04/drivers/block/ide.c:750: undefined reference to `ide_preinit'
make[4]: *** [Makefile:1700: u-boot] Error 1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-06-27 18:39:32 +02:00
Jan Hoffmann
b1d5ab1a69 ramips: add support for NETGEAR WAC124
The WAC124 hardware appears to be identical to R6260/R6350/R6850.

SoC:   MediaTek MT7621AT
RAM:   128M DDR3
FLASH: 128M NAND (Macronix MX30LF1G18AC)
WiFI:  MediaTek MT7603 bgn 2T2R
       MediaTek MT7615 nac 4T4R
ETH:   SoC Integrated Gigabit Switch (1x WAN, 4x LAN)
USB:   1x USB 2.0
BTN:   Reset, WPS
LED:   Power, Internet, WiFi, USB (all green)

Installation:
The factory image can be flashed from the stock firmware web interface
or using nmrpflash. With nmrpflash it is also possible to revert to
stock firmware.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2020-06-27 00:33:29 +02:00
Alex Lewontin
bd49f2c984 ramips: add support for Netgear R6080
This adds support for the Netgear R6080, aka Netgear AC1000.

The R6080 has almost the same hardware as the Netgear R6120,
aka Netgear AC1200, but it lacks the USB port, has only 8 MiB flash and
uses a different SERCOMM_HWID.

Specification:

SoC: MediaTek MT7628 (580 MHz)
Flash: 8 MiB
RAM: 64 MiB
Wireless: 2.4Ghz (builtin) and 5Ghz (MT7612E)
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100
WAN ports: 1
UART (57600 8N1) on PCB

Installation:

Flashing OpenWRT from stock firmware requires nmrpflash. Use an ethernet
cable to connect to LAN port 1 of the R6080, and power the R6080 off.
From the connected workstation, run
`nmrpflash -i eth0 -f openwrt-ramips-mt76x8-netgear_r6080-squashfs-factory.img`,
replacing eth0 with the appropriate interface (can be identified by
running `nmrpflash -L`). Then power on the R6080. After flashing has finished,
power cycle the R6080, and it will boot into OpenWRT. Once OpenWRT has been
installed, subsequent flashes can use the web interface and sysupgrade files.

Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
[rebase and adjust for 5.4]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-27 00:29:45 +02:00