Commit Graph

19 Commits

Author SHA1 Message Date
Hauke Mehrtens
6062d85892 kernel: Update kernel 4.19 to version 4.19.131
Fixes:
- CVE-2020-10757

The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was
backported which needed some adaptations to other code.

Run tested: ath79
Build tested: ath79

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-04 21:12:42 +02:00
Koen Vandeputte
20b5a4ca01 kernel: bump 4.19 to 4.19.101
Refreshed all patches.

Fixes:
- CVE-2019-14896
- CVE-2019-14897

Remove upstreamed:
- 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch
- 950-0202-staging-bcm2835-camera-fix-module-autoloading.patch
- 001-4.22-01-MIPS-BCM63XX-drop-unused-and-broken-DSP-platform-dev.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-04 18:10:13 +01:00
Álvaro Fernández Rojas
0c97f034c9 ipq806x: refresh kernel patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-01-08 14:33:03 +01:00
Ansuel Smith
5318a6dea3 ipq806x: add fab scaling support
Add fab scaling support and dtsi definition

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-08 14:30:43 +01:00
Ansuel Smith
0ef755b8ad ipq806x: refactor l2 freq scaling patch
Refactor l2 freq scaling patch to support voltage
scaling and add support to base cache scaling on
cpu freq scaling. Update the dtsi files with the new
definition used in the new code.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-08 14:30:43 +01:00
Ansuel Smith
5ba02d10ed ipq806x: opp/core: fix broken patch Handle opp voltage adjust
The opp_notifier introduced with patch 0054-Handle-OPP-voltage adjust
for some reason missed the actual registration in the opp struct,
resulting in never being registred.
This was present in kernel 4.9 patchset but dropped in the transition
 to 4.14. Reintroduce this and fix patch 0055 about L2 cache scaling.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-08 14:30:43 +01:00
Hauke Mehrtens
b6cdc042af kernel: bump 4.19 to 4.19.93
Refreshed all patches.

The patch hack-4.19/550-loop-better-discard-for-block-devices.patch was
replaced with an new version of the patch from:
https://lore.kernel.org/patchwork/patch/1153625/
https://lore.kernel.org/patchwork/patch/1153626/

Compile-tested on: ipq40xx, lantiq
Runtime-tested on: ipq40xx, lantiq

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-01-05 00:43:36 +01:00
Ansuel Smith
77f4d5c6bb ipq806x: rework ipq806x specific tsense temp driver
Tsense driver for ipq806x have various problem.
- Emit wrong error. On probing of this driver, nvmem driver can be
  not ready and this cause a EDEFER error. Actually this is not an
  error as the kernel will retry to probe the driver after the
  nvmem driver is loaded.
- Use uninitialized value on trigger of critical temp
- Doesn't free allocated memory

Because of this, rework the driver and improve it by removing extra
load of data.

Change the logic of loading data. Use the backup calib data only
when the calib data is not present. As the calibration is only
needed to set the temp offset, we don't really need to read
both calib data and set the offset based only on the backup one.
Also change how the notifier function work. At times when we
output the trigger message, we already have read the temp so
remove the extra read and the wrong uninitialized data that
probably caused a kernel panic for null pointer exception.
(Think we never experience this bug because the router
never reached that temp ever... So just lucky)

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2019-12-26 08:31:42 +01:00
Ansuel Smith
c8086c7d2d ipq806x: refresh new and changed patches
Refresh patches to remove fuzz

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2019-12-26 08:31:42 +01:00
Ansuel Smith
e18f8e417f ipq806x: add patch to support krait cpu scaling driver
This patch has been proposed but never actually merged to
mainline. It was accepted but never re proposed by the
creator.
Rework it, fix kernel panic cause by double kfree.

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2019-12-26 08:31:42 +01:00
Ansuel Smith
a37f787162 ipq806x: backport qcom-cpufreq-kryo patch
Backport patch applied to qcom-cpufreq-kryo
driver as krait cpu will base on this driver.

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2019-12-26 08:31:42 +01:00
Ansuel Smith
4165f2340e ipq806x: drop old cpufreq patch
Drop old cpufreq as now we have new driver that
can use normal kernel opp definition

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2019-12-26 08:31:42 +01:00
Ansuel Smith
e9a982e1d9 ipq806x: opp/core: update patch updating voltage tolerance on voltage adjust
Rework 0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t
to reflect changes upstream.

- Skip unnecessary allocation of buffer to set u_volt
- Change opp u_volt directly

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2019-12-26 08:31:41 +01:00
Ansuel Smith
456ab9a912 ipq806x: opp/core: update patch allowing adjusting of OPP voltages at runtime
Update 0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime with
upstream version.

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2019-12-26 08:31:41 +01:00
Ansuel Smith
5ab9c0b388 ipq806x: fix bug in L2 cache scaling
It has been notice a buf in L2 cache scaling where the scaling is not
done proprely if the frequency is set to the initial state before
the new frequency.

From: https://patchwork.kernel.org/patch/10565443/

* The clocks are set to aux clock rate first to make sure the
* secondary mux is not sourcing off of QSB. The rate is then set to
* two different rates to force a HFPLL reinit under all
* circumstances.

In the initial stage of boot to force a new frequency to apply, is
needed to first set the frequency back to the lowest one (aux_rate)
and then to the target one. This force and make sure the controller
actually switch the frequency to the right one. Apply the same
mechanism to L2 frequency scaling. Before scaling to the target
frequency, first set the frequency to the aux_rate to force the
transition, then scale it to the target frequency. Doing the wrong way
can produce unexpected results and could lock the scaling mechanism
until a full reboot is done (Causing a full reset by the krait-cc driver)

From: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=77612720a2362230af726baa4149c40ec7a7fb05

When the Hfplls are reprogrammed during the rate change,
the primary muxes which are sourced from the same hfpll
for higher frequencies, needs to be switched to the 'safe
secondary mux' as the parent for that small window. This
is done by registering a clk notifier for the muxes and
switching to the safe parent in the PRE_RATE_CHANGE notifier
and back to the original parent in the POST_RATE_CHANGE notifier.

This should apply also to L2 scaling... as we can't relly use
the notifier, we manually do this on L2 scaling.

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2019-12-26 08:31:41 +01:00
Hauke Mehrtens
f0df0d6a14 kernel: bump 4.19 to 4.19.91
Refreshed all patches.

Compile-tested on: ipq40xx, apm821xx
Runtime-tested on: ipq40xx

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-12-24 17:45:33 +01:00
Ansuel Smith
402153623d ipq806x: fix tsens driver in 4.19
Added patch:

 - 063-3 Fix tsense shared memory problem

Recent changes in ioremap_resource function are causing fails for the
memory areas which are already mapped. This changes are causing tsense
driver failures during initialization:

  qcom-tsens 900000.thermal-sensor: tsens init failed

So this patch uses simple ioremap in order to use this shared memory
space.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[commit subject and desciption facelitf]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-12-19 22:41:57 +01:00
Christian Lamparter
63066d3006 ipq806x: refresh 4.19 patches
Reworked:

 - 0034 patchset update

Added:

 - 080 Add support for pinctrl-msm framework

Removed:

 - 0074-ipq806x-usb-Control-USB-master-reset.patch
   (we now have a dedicated driver for qcom usb)

 - 0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke
   (merged upstream)

 - 310-msm-adhoc-bus-support
   (it looks like it was never actually used in any dts)

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[commit subject and description facelift, SoB fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-12-19 22:41:57 +01:00
Ansuel Smith
c5d2f3c476 ipq806x: copy files from 4.14 to 4.19
This copies files from files-4.14 to files-4.19 directory in order to
get clear diffs for any changes done from now on.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[added missing commit description, refreshed ea8500 and wpq864 DTS]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-12-19 22:41:57 +01:00