Commit Graph

43665 Commits

Author SHA1 Message Date
Hauke Mehrtens
9b47e4c007 brcm2708: Move kmod-sound-soc-3dlab-nano-player to sound modules
kmod-sound-soc-3dlab-nano-player was in the global kernel menu before,
add the dependency to sound to move it to the correct category.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-27 11:08:46 +01:00
Hauke Mehrtens
fcbbec8eb2 kernel: Fix kmod-regmap split
Two regmap dependencies were wrong, this patch fixes them.
This was detected by the build bots.

Fixes: fd5c168701 ("kernel: Build: Split kmod-regmap")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-27 11:07:14 +01:00
Michael Heimpold
268b5bec80 mbedtls: Kconfig option to enable/disable debug functions
This introduces a new Kconfig option to switch on/off mbedtls' support
for debug functions.

The idea behind is to inspect TLS traffic with Wireshark for debug
purposes. At the moment, there is no native or 'nice' support for
this, but at
68aea15833
an example implementation can be found which uses the debug functions
of the library. However, this requires to have this debug stuff enabled
in the library, but at the moment it is staticly patched out.

So this patch removes the static part from the configuration patch
and introduces a dynamic config file editing during build.

When enabled, this heavily increases the library size, so I added
a warning in the Kconfig help section.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2019-01-27 01:04:53 +01:00
Deng Qingfang
e8f2302516 mbedtls: update to 2.16.0
Refresh patch

https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.0-2.7.9-and-2.1.18-released

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-01-27 01:04:53 +01:00
protonesso
d018b55a18 update uClibc-ng from 1.0.30 to 1.0.31
Signed-off-by: protonesso <nagakamira@gmail.com>
2019-01-27 01:04:53 +01:00
Martin Schiller
654124b1af lantiq/led_dsl: Fix netdev led trigger
In the upstream netdev led trigger the one mode file was replaced by 3
files named rx, tx and link. Fix the netdev trigger configuration code
to use the modified API.

This fix is based on 201058b35c ("base-files: Fix netdev led trigger")

Fixes: aa3b6a08c5 ("kernel: Replace ledtrig-netdev with upstream backport")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2019-01-27 01:04:53 +01:00
Daniel Engberg
be1d70e0a2 sunxi: Add support for SY8106A voltage regulator
Add support for Silergy SY8106A voltage regulator which is
needed for cpufreq support on boards such as Orange Pi PC

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[Remove CONFIG_REGULATOR_SY8106A from cortexa7]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-27 01:04:52 +01:00
Karl Pálsson
04b418ac84 kernel: add kmod-usb-gadget-cdc-composite
This builds the "g_cdc" gadget module, providing ethernet+serial.

Signed-off-by: Karl Pálsson <karlp@etactica.com>
2019-01-27 01:04:37 +01:00
Petr Štetiar
cbbef976e2 build: dtc: Disable noisy warnings by default
While helping with review and build testing of a few 4.19 pull requests,
I've noticed, that dtc compiler in OpenWrt uses different options then
upstream kernel, which is leading to a very noisy output[1]. It wouldn't
be that bad per se, but a lot of such warnings aren't easily fixable so
I think, that we should follow what upstream does and simply ignore^W
silence those noisy warnings.

So this patch tries to syncs dtc compiler flags with upstream kernel
till version 4.19.13, disabling those warnings as they were added in
upstream kernel:

 v4.6-rc1-2-gbc55398 dtc: turn off dtc unit address warnings by default

  The newly added dtc warning to check DT unit-address without reg
  property and vice-versa generates lots of warnings. Turn off the check
  unless building with W=1 or W=2.

 v4.11-rc2-11-g8654cb8 dtc: update warning settings for new bus and node/property

  dtc gained new warnings checking PCI and simple buses, unit address
  formatting, and stricter node and property name checking. Disable the
  new dtc warnings by default as there are 1000s. As before, warnings are
  enabled with W=1 or W=2. The strict node and property name checks are a
  bit subjective, so they are only enabled for W=2.

 v4.16-rc3-9-g4fd98e3 scripts: turn off some new dtc warnings by default

  The latest dtc update adds some new noisy warnings, so turn them off by
  default. Disable 'avoid_unnecessary_addr_size' and 'alias_paths'. They
  can be re-enabled by building with 'W=1'.

 v4.17-rc1-27-g74656b6 kbuild: disable new dtc graph and unit-address warnings

  dtc gained some new warnings for OF graphs and unique unit addresses,
  but they are currently much too noisy. So turn off
  'graph_child_address', 'graph_port', and 'unique_unit_address' warnings
  by default. They can be enabled by building dtbs with W=1.

Build tested on imx6 and ath79 with 4.14 and 4.19.

1. https://github.com/openwrt/openwrt/pull/1694#issuecomment-450864335

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-01-27 00:16:14 +01:00
Tomasz Maciej Nowak
7d188fb4db mvebu: backport upstream fixes for armada 37xx
Upstream patches for processor frequency scaling, which fix possible
system hard lockups.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-01-27 00:16:14 +01:00
Tomasz Maciej Nowak
9b1102416f mvebu: espressobin: correct spi node in dts
Drop customizations in:
508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch
and move them to separate patch, with broader explanation.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-01-27 00:16:14 +01:00
Tomasz Maciej Nowak
b004835908 mvebu: sort armada 37xx upstream patches chronologically
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-01-27 00:16:14 +01:00
Tomasz Maciej Nowak
9f6c4ba25c mvebu: move HARDEN_BRANCH_PREDICTOR to common config
This symbol is enabled in all subtargets, move it to common kernel
config.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Acked-by: Rosen Penev <rosenp@gmail.com>
2019-01-27 00:16:14 +01:00
Hauke Mehrtens
fd5c168701 kernel: Build: Split kmod-regmap
This reduces the needed modifications to the mainline Linux kernel and
also makes the regmap package work with an out of tree kernel which
does not have these modifications.

The regmap-core is only added when it is really build as a module.
The regmap-core is normally bool so it cannot be built as a module in an
unmodified kernel. When it is selected by on other kernel module it will
always be selected as build in and it also does not show up in
$(LINUX_DIR)/modules.builtin as it is not supposed to be a kernel module.
When it is not in $(LINUX_DIR)/modules.builtin the build system expects
it to be built as a .ko file.
Just check if the module is really there and only add it in that case.

This splits the regmap package into multiple packages, one for each bus type.
This way only the bus maps which are really needed have to be added.
This also splits the I2C, SPI and MMIO regmap into separate packages to not
require all these subsystems to build them, on an unmodified upstream kernel
this also causes problems in some situations.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2019-01-27 00:16:13 +01:00
Oskari Lemmela
538127cf98 sunxi: spi flash dts changes
Backport A64 SPI flash DTS changes to 4.14 kernel.

Add Openwrt specific flash partitions to Sopine.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
2019-01-26 23:11:49 +01:00
Oskari Lemmela
72102b11b8 sunxi: add spi flash support to kernel
Some of sunxi devices have onboard SPI flash.
Enable SPI NOR support and MTD fit split in kernel config.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
2019-01-26 23:11:49 +01:00
Oskari Lemmela
7f06db06f2 sunxi: add a64 watchdog support
Backport A64 watchdog DTS change to 4.14 kernel.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
2019-01-26 23:11:49 +01:00
Rosen Penev
8fd5091696 e2fsprogs: Update to 1.44.5
Added e4crypt tool for encrypting files and directories. To work properly
requires kernel and work on keyutils. That will be done in a future commit

Some top-level reorganization for consistency between packages.

Tested on GnuBee PC1 (mt7621).

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-01-26 23:11:49 +01:00
Django Armstrong
1c2f7b5115 ath79: add support for Devolo WiFi Pro 1750e
Hardware
--------
CPU:   Qualcomm Atheros QCA9558
RAM:   128M DDR2
FLASH: 16MiB
ETH:   1x Atheros AR8035 (PoE in)
       1x Atheros AR8033
WiFi2: QCA9558 3T3R (SiGE SE2565T 2.4 GHz power amp x3)
WiFi5: QCA9880 3T3R (Skyworks 5003L1 5 GHz power amp x3)
BTN:   1x Reset
       1x WPS
       1x USB eject
LED:   1x LED blue
       1x LED red
BEEP:  1x GPIO attached piezo beeper
UART:  3.3V GND TX RX (115200-N-8) (3.3V is pin closest to rear ports)
       Dupont 4 pin header
       Rear RJ45 serial port non-functional
USB:   1x v2.0

Installation
------------
Make sure you set a password for the root user as prompted on first
setup!

1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password previously set in the web interface.

2. Install OpenWRT with

> sysupgrade -n -F /tmp/<openwrt-image-name>

Signed-off-by: Django Armstrong <iamdjango@hotmail.com>
2019-01-26 21:46:33 +01:00
Mathias Kresin
2a4e756085 ramips: rt3883: drop jimage support
The splitter isn't required by any of the boards in the subtarget.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-26 21:46:33 +01:00
Mathias Kresin
8293aec943 ramips: disable CONFIG_MTD_SPLIT_FIRMWARE
It's no longer needed as all mt7621 devices use DT binding (supported by
upstream mtd code) for specifying "firmware" part format explicitly.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-26 21:46:33 +01:00
Rafał Miłecki
acd790c150 ramips: specify "firmware" partition format for remaining devices
It results in calling the right MTD parser directly instead of trying
them one by one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[use the lzma splitter for the AR670W]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-26 21:46:33 +01:00
Linus Walleij
11e9577511 gemini: Add a config for kernel v4.19
This adds a config for kernel v4.19 to the Gemini
target.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-26 21:46:33 +01:00
Linus Walleij
e44d1e17da gemini: Add v4.19 kernel patches
This is the remainder of kernel patches for the v4.19
kernel. A whole slew of the previous patch stack is now
upstream, so this mainly contains the stuff that was
added upstream between v4.19 and v5.0-rc1, and then
the USB FOTG201 patches from Hans.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-26 21:46:32 +01:00
Petr Štetiar
c2bdd018a3 uboot-imx6: Bump to 2019.01
Build tested: apalis, mx6sabresd, nitrogen6dl, nitrogen6dl2g, nitrogen6q,
              nitrogen6q2g, nitrogen6s, nitrogen6s1g, wandboard

Run tested: apalis (pending PR #1595)

Cc: Felix Fietkau <nbd@nbd.name>
Cc: Vladimir Vid <vladimir.vid@sartura.hr>
Cc: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-01-26 21:46:32 +01:00
Petr Štetiar
66a4978b43 u-boot.mk: Fix building of recent U-Boot sources
This patch fixes following error with U-Boot 2019.01 on imx6:

 In file included from tools/lib/crc16.c:1:0:
 ./tools/../lib/crc16.c: In function 'crc16_ccitt':
 ./tools/../lib/crc16.c:70:2: error: 'for' loop initial declarations are only allowed in C99 mode
   for (int i = 0;  i < len;  i++)
   ^
 ./tools/../lib/crc16.c:70:2: note: use option -std=c99 or -std=gnu99 to compile your code

Code was introduced in the upstream v2019.01-rc1-154-g51c2345:

 commit 51c2345bd24837f9f67f16268da6dc71573f1325
 Author: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
 Date:   Sun Nov 25 19:22:19 2018 +0100

    Roll CRC16-CCITT into the hash infrastructure

Upstream has added -std=gnu11 host flag in v2018.07-rc2-1-gfa89399:

 commit fa893990e9b53425af5f5059e04a2bffde91ccf9
 Author: Tom Rini <trini@konsulko.com>
 Date:   Tue Jun 19 23:53:54 2018 -0400

    Makefile: Ensure we build with -std=gnu11

Build tested on imx6: apalis, mx6sabresd, nitrogen6dl, nitrogen6dl2g,
                      nitrogen6q, nitrogen6q2g, nitrogen6s, nitrogen6s1g,
                      wandboard

Run tested: apalis (pending PR #1595)

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-01-26 21:46:32 +01:00
Michael Heimpold
52d7a1d3b2 uboot-mxs: bump to v2019.01
Also update the U-Boot BSP patch for I2SE Duckbill devices.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2019-01-26 21:46:32 +01:00
David Bauer
01dcd574a2 ramips: add support for Archer C50 v4
This adds support for the TP-Link Archer C50 v4.
It uses the same hardware as the v3 variant, sharing the same FCC-ID.

CPU:   MediaTek MT7628 (580MHz)
RAM:   64M DDR2
FLASH: 8M SPI
WiFi:  2.4GHz 2x2 MT7628 b/g/n integrated
WiFI:  5GHz 2x2 MT7612 a/n/ac
ETH:   1x WAN 4x LAN
LED:   Power, WiFi2, WiFi5, LAN, WAN, WPS
BTN:   WPS/WiFi, RESET
UART:  Near ETH ports, 115200 8n1, TP-Link pinout

Create Factory image
--------------------
As all installation methods require a U-Boot to be integrated into the
Image (and we do not ship one with the image) we are not able to create
an image in the OpenWRT build-process.

Download a TP-Link image from their Wesite and a OpenWRT sysupgrade
image for the device and build yourself a factory image like following:

TP-Link image:             tpl.bin
OpenWRT sysupgrade image:  owrt.bin

 > dd if=tpl.bin of=boot.bin bs=131584 count=1
 > cat owrt.bin >> boot.bin

Installing via Web-UI
---------------------
Upload the boot.bin via TP-Links firmware upgrade tool in the
web-interface.

Installing via Recovery
-----------------------
Activate Web-Recovery by beginning the upgrade Process with a
Firmware-Image from TP-Link. After starting the Firmware Upgrade,
wait ~3 seconds (When update status is switching to 0%), then
disconnect the power supply from the device. Upgrade flag (which
activates Web-Recovery) is written before the OS-image is touched and
removed after write is succesfull, so this procedure should be safe.

Plug the power back in. It will come up in Recovery-Mode on 192.168.0.1.
When active, all LEDs but the WPS LED are off.
Remeber to assign yourself a static IP-address as DHCP is not active in
this mode.

The boot.bin can now be uploaded and flashed using the web-recovery.

Installing via TFTP
-------------------
Prepare an image like following (Filenames from factory image steps
apply here)

 > dd if=/dev/zero of=tp_recovery.bin bs=196608 count=1
 > dd if=tpl.bin of=tmp.bin bs=131584 count=1
 > dd if=tmp.bin of=boot.bin bs=512 skip=1
 > cat boot.bin >> tp_recovery.bin
 > cat owrt.bin >> tp_recovery.bin

Place tp_recovery.bin in root directory of TFTP server and listen on
192.168.0.66/24.

Connect router LAN ports with your computer and power up the router
while pressing the reset button. The router will download the image via
tftp and after ~1 Minute reboot into OpenWRT.

U-Boot CLI
----------
U-Boot CLI can be activated by holding down '4' on bootup.

Dual U-Boot
-----------
This is the first TP-Link MediaTek device to feature a split-uboot
design. The first (factory-uboot) provides recovery via TFTP and HTTP,
jumping straight into the second (firmware-uboot) if no recovery needs
to be performed. The firmware-uboot unpacks and executed the kernel.

Web-Recovery
------------
TP-Link integrated a new Web-Recovery like the one on the Archer C7v4 /
TL-WR1043v5. Stock-firmware sets a flag in the "romfile" partition
before beginning to write and removes it afterwards. If the router boots
with this flag set, bootloader will automatically start Web-recovery and
listens on 192.168.0.1. This way, the vendor-firmware or an OpenWRT
factory image can be written.

By doing the same while performing sysupgrade, we can take advantage of
the Web-recovery in OpenWRT.

It is important to note that Web-Recovery is only based on this flag. It
can't detect e.g. a crashing kernel or other means. Once activated it
won't boot the OS before a recovery action (either via TFTP or HTTP) is
performed. This recovery-mode is indicated by an illuminated WPS-LED on
boot.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-26 21:46:32 +01:00
David Bauer
28cd2caa35 base-files: sysupgrade: support additional mtd options
Add support for passing additional parameters to mtd called during
sysupgrade. It will be required to toggle the "recovery moe" flag
supported by recent tp-link boards.

Signed-off-by: David Bauer <mail@david-bauer.net>
[split code from board support patch; add commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-26 21:46:32 +01:00
David Bauer
1e06482f7d mtd: add logic for TP-Link ramips recovery magic
This adds an option to set the recovery flag of newer TP-Link MediaTek
boards and remove it after a successful write.

To make use of this feature, add the '-t' option to mtd-write.

The '-t' option takes the mtd partition containing the recovery flag
(usually 'romfile') as an argument. Make sure this partition is not
flagged as read-only!

Example:
 > mtd -t romfile write owrt.bin firmware

This command writes the recovery-flag before it begins writing the image
to the firmware partition. After the image-write has been successful,
the recovery flag is removed.

This way, the TP-Link web-recovery is automatically enabled on an
unsucessful flash (e.g. power loss).

This option is only available if the mtd package is compiled for the
ramips target.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-26 21:46:32 +01:00
David Bauer
36a091cb07 tools: mktplinkfw2: add split-uboot layout
This commit adds the split-uboot partition layout used by the
Archer C50 v4 to mktplinkfw2.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-26 21:46:32 +01:00
Christian Lamparter
53cc74bfa7 gemini: dlink-dir-685: fix rt2800-pci package name
The package is now called kmod-rt2800-pci.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-26 21:43:17 +01:00
Oever González
a873b29284 ipq40xx: add support for Linksys EA6350v3
Specifications:
SOC: Qualcomm IPQ4018
RAM: 256 MiB Samsung K4B2G1646F-BYK0
FLASH1: MX25L1605D 2 MB
FLASH2: Winbond W25N01GV 128Mb
ETH: Qualcomm QCA8075
WLAN0: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2
WLAN1: Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2
INPUT: WPS, Reset
LED: Status - Green
SERIAL: Header at J19, Beneath DC Power Jack
        1-VCC ; 2-TX ; 3-RX; 4-GND;
        Serial 115200-8-N-1.

Tested and working:
- USB (requires extra packages)
- LAN Ethernet (Correct MAC-address)
- WAN Ethernet (Correct MAC-address)
- 2.4 GHz WiFi (Correct MAC-address)
- 5 GHz WiFi (Correct MAC-address)
- Factory installation from Web UI
- OpenWRT sysupgrade
- LED
- Reset Button

Need Testing:
- WPS button

Install via Web UI:
- Attach to a LAN port on the router.
- Connect to the Linksys Smart WiFi Page (default 192.168.1.1) and login
- Select the connectivity tab on the left
- In the manual update box on the right
- Select browse, and browse to
  openwrt-ipq40xx-linksys_ea6350v3-squashfs-factory.bin
- Click update.
- Read and accept the warning
- The router LED will start blinking. When the router LED goes solid, you
  can now navigate to 192.168.1.1 to your new OpenWrt installation.

Sysupgrade:
- Flash the sysupgrade image as usual. Please: try to do a reset everytime
  you can (doing it with LuCI is easy and can be done in the same step).

Recovery (Automatic):
- If the device fails to boot after install or upgrade, whilst the unit is
  turned on:
1 - Wait 15 seconds
2 - Switch Off and Wait 10 seconds
3 - Switch on
4 - Repeat steps 1 to 3, 3 times then go to 5.
5 - U-boot will have now erased the failed update and switched back to the
    last working firmware - you should be able to access your router on
    LAN.

Recovery (Manual):
- The steps for manual recovery are the same as the generic u-boot tftp
  client method.

Back To Stock:
- Use the generic recovery using the tftp client method to flash the
  "civic.img". Also you can strip-and-pad the original image and use
  the generic "mtd" method by flashing over the "kernel" partition.
* Just be careful to flash in the partition that the device is currently
  booted.

Signed-off-by: Ryan Pannell <ryan@osukl.com>
Signed-off-by: Oever González <notengobattery@gmail.com>
[minor edits, removed second compatible of nand, added dtb entry to 4.19]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-26 21:43:11 +01:00
Oever González
892d741259 build: add a script for generating Linksys factory images
This commit adds the 'Build/linksys-image' rule and the
'linksys-image.sh' script to the build system.

This change is needed for generating factory images for the Linksys
EA6350v3 device. Without this patch, only valid sysupgrade images can be
generated. With this patch, users can flash the device without the
need of physical access or disassembly.

Signed-off-by: Ryan Pannell <ryan@osukl.com>
Signed-off-by: Oever González <notengobattery@gmail.com>
2019-01-26 21:43:07 +01:00
Oever González
c43acdf342 mtd: add linksys_bootcount to the ipq40xx target
This commit adds the object 'linksys_bootcount_fix.o' to the ipq40xx
target.

This is needed for the Linksys EA6350v3 device. Without this patch, the
device will switch-back between the current and the last flashed firmware
every 3 (three) reboots. With this patch, the device works as expected.

Signed-off-by: Ryan Pannell <ryan@osukl.com>
Signed-off-by: Oever González <notengobattery@gmail.com>
2019-01-26 21:43:06 +01:00
Oever González
ad3e667539 uboot-envtools: add support for Linksys EA6350v3
This commit adds support for the Linksys EA6350v3 device in the ipq40xx
target.

This is needed for uboot-envtools to access the environment. Without this
patch, the Linksys EA6350v3 will not be able to access the uboot
environment. As a side effect, the feature auto_recovery will make the
device unstable by switching between the latest and the current firmware.

Signed-off-by: Ryan Pannell <ryan@osukl.com>
Signed-off-by: Oever González <notengobattery@gmail.com>
2019-01-26 21:43:04 +01:00
Oever González
fb7b8d5ad3 ipq-wifi: add support for Linksys EA6350v3
This commit adds support for the Linksys EA6350v3 device in the ipq-wifi
target.

Without this patch, the Linksys EA6350v3 won't be hable to have fully
functional wireless interfaces. This is not permanent: the board data has
already been sent to ath10k _at_ lists _dot_ infradead _dot_ org

Signed-off-by: Ryan Pannell <ryan@osukl.com>
Signed-off-by: Oever González <notengobattery@gmail.com>
2019-01-26 21:42:57 +01:00
Oever González
69aa1c5ac0 mac80211: ath: add extra 'regulatory domains'
This patch adds several country codes to the regd.h and regd_common.h
files in order to support devices whose country codes are not present in
the original list.

Without this patch, all devices whose manufacturer programmed any of these
code in their EEPROM will run without wireless interfaces.

Signed-off-by: Oever González <notengobattery@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [matched signed-off]
2019-01-26 21:41:04 +01:00
Christian Lamparter
47c3ada44a uboot-fritz4040: update package to 2019-01-25
David Bauer reported a u-boot crash (data abort) at a odd
place (byteswap) when he ran ping/tftp on his 7530.

|(FRITZ7530) # ping 192.168.1.70
|eth0 PHY0 up Speed :1000 Full duplex
|eth0 PHY1 Down Speed :10 Half duplex
|eth0 PHY2 Down Speed :10 Half duplex
|eth0 PHY3 Down Speed :10 Half duplex
|eth0 PHY4 Down Speed :10 Half duplex
|Using eth0 device
|data abort
|pc : [<84234774>]      lr : [<842351a4>]
|sp : 8412fdb0  ip : 0000009b     fp : 00000000
|r10: 00000000  r9 : 00000001     r8 : 8412ff68
|r7 : 00000000  r6 : 0000002a     r5 : 84244e90  r4 : 8425e28e
|r3 : 84244e90  r2 : 14000045     r1 : 8412fdb0  r0 : 8425e28e
|Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
|Resetting CPU ...
|
|resetting ...

This issue is caused by switch from gcc 5.5 to 7.1+ as explained
in the upstream patch:

|From a768e513b07b5999a8e7d7740ac8d9da04ee7e51 Mon Sep 17 00:00:00 2001
|From: Denis Pynkin <denis.pynkin@collabora.com>
|Date: Fri, 21 Jul 2017 19:28:42 +0300
|Subject: [PATCH] net: Use packed structures for networking
|
|PXE boot is broken with GCC 7.1 due option '-fstore-merging' enabled
|by default for '-O2':
|
|BOOTP broadcast 1
|data abort
|pc : [<8ff8bb30>]          lr : [<00004f1f>]
|reloc pc : [<17832b30>]    lr : [<878abf1f>]
|sp : 8f558bc0  ip : 00000000     fp : 8ffef5a4
|r10: 8ffed248  r9 : 8f558ee0     r8 : 8ffef594
|r7 : 0000000e  r6 : 8ffed700     r5 : 00000000  r4 : 8ffed74e
|r3 : 00060101  r2 : 8ffed230     r1 : 8ffed706  r0 : 00000ddd
|Flags: nzcv  IRQs off  FIQs off  Mode S
|
|Core reason is usage of structures for network headers without packed
|attribute.

Reported-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-26 21:09:12 +01:00
Petr Štetiar
89afabf9f8 ath79: dts: Unify naming of gpio-led nodes
In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.

1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation

Signed-off-by: Petr Štetiar <ynezz@true.cz>
[split up, removed entries where it could clash due to ath9k-leds]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-26 21:09:12 +01:00
Petr Štetiar
a012b3dfa8 ath79: dts: Unify naming of gpio-keys nodes
In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.

1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up]
2019-01-26 21:09:12 +01:00
Deng Qingfang
c2bcdabf2a ramips: fix support for MX25L25635F flash
Patch picked from commit 82618062cf

This enables 4B opcodes for MX25L25635F, to fix the reboot crash
issue (FS#1120) At least 3 devices are using this flash
- GeHua GHL-R-001
- Youku YK1
- Newifi D1

Now the MX25L25635F can be correctly detected without breaking MX25L25635E
[ 3.034324] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[ 3.045962] m25p80 spi0.0: mx25l25635f (32768 Kbytes)
[ 3.056098] 4 fixed-partitions partitions found on MTD device spi0.0
[ 3.068748] Creating 4 MTD partitions on "spi0.0":

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added deprecation notice]
2019-01-26 17:10:19 +01:00
David Bauer
b368373fab mpc85xx: add support for OCEDO Panda
CPU:   FSL P1020 (2x 800MHz E500 PPC)
RAM:   1GB DDR3
FLASH: 256MiB NAND
WiFi:  2x Atheros AR9382 2x2:2 abgn
ETH:   2x BCM54616S - 1x BCM53128 8-port switch
LED:   5x LEDs (Power, WiFi1, WiFi2, N/D, SYS)
BTN:   1x RESET

Installation
------------

1. Download initrams kernel image, dtb binary and sysupgrade image.

2. Place initramfs kernel into tftp root directory. Rename to
"panda-uimage-factory".

3. Place dtb binary into tftp root directory. Rename to "panda.fdt".

4. Start tftp server on 192.168.100.8/24.

5. Power up the device with the reset button pressed. It will download
the initrams and dtb via tftp and boot into OpenWRT in RAM.

6. SSH into the device and remove the factory partitions.

 > ubirmvol /dev/ubi0 --name=kernel1
 > ubirmvol /dev/ubi0 --name=rootfs1
 > ubirmvol /dev/ubi0 --name=devicetree1

You will have around 60 MiB of free space with that.

You can also delete "kernel2", "devicetree2", "rootfs2" and "storage"
respectively in case you do not want to go back to the vendor firmware.

7. Modify the U-Boot bootcmd to allow for booting OpenWRT

 > fw_setenv bootcmd_owrt "ubi part ubi && ubi read 0x1000000 kernel
   && bootm 0x1000000"

 > fw_setenv bootargs_owrt "setenv bootargs console=ttyS0,115200
   ubi.mtd=3,2048"

 > fw_setenv bootcmd "run bootargs_owrt; run bootcmd_owrt"

8. Transfer the sysupgrade image via scp into the /tmp directory.

9. Upgrade the device

 > sysupgrade -n /tmp/<imagename>

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-26 17:10:19 +01:00
David Bauer
90bfbed7c2 mpc85xx: use generic diag.sh
This commit removes the target-specific diag.sh script. This way, the
generic one is used for the target, which uses DT-aliases to specify the
LEDs used.

This way, we are also able to use different LEDs to indicate different
states. We use green status LEDs for indicating boot and a running
system. Where possible, the red status LED is used to indicate failsafe
mode and a running upgrade.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-26 17:10:19 +01:00
Christian Lamparter
b2e1333de3 ipq40xx: 4.19: fix pcie wifi unit-address of the MR33 and A62
The unit address should be wifi@1,0 since the device is located
at 0000:01:00.0.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-26 17:10:19 +01:00
Mathias Kresin
1f0e08cf95 gemini: add EOD marker to rootfs images
With 6409b159e8 ("gemini: switch to 4.14") the EOF marker were dropped
from the rootfs images. Without the marker the rootfs_data partition
can't be created and it isn't possible to permanently store any
configuration changes.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-26 15:23:38 +01:00
Mathias Kresin
82c7699dd8 gemini: fix ITian Square One SQ201 package selection
All kernel modules are prefixed with kmod-. Add the prefix to include
the desired packages.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-26 15:23:38 +01:00
Mathias Kresin
a565659c29 gemini: replace date placeholder
Replace the data placerholder in ImageInfo-itian_sq201 in a reproducible
way.

The code for the replace was accidentality dropped in 5bac623895
("gemini: unify and fix ib-nas4220b and sq201 image creation")

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-26 15:23:38 +01:00
Mathias Kresin
67d39c03ec gemini: drop Teltonika RUT1xx artifacts
Support for the Teltonika RUT1xx was added with the switch to kernel
4.4. Hidding such changes in a kernel switch commit is the wrong way and
the support for the Teltonika RUT1xx is pretty much incomplete.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-26 15:23:38 +01:00
Mathias Kresin
2a8fe45df5 gemini: add wiligear image build code
They were dropped with 6409b159e8 ("gemini: switch to 4.14") without
any explaination.

The image generation is disabled for now as it would break the build for
the target. The mkfwimage2 call need to be adjusted to reflect the real
size of kernel and rootfs. Nevertheless, add the required code to give
interested parties a chance to fix the remaining issues.

The dts would need to use the ecoscentric,redboot-fis-partitions
partition parser to get the correct partition offsets and size. It's
expected that the OEM firmware adjusts the on flash partition table with
the values defined in the image header.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-26 15:23:37 +01:00