Commit Graph

50758 Commits

Author SHA1 Message Date
Shiji Yang
d160b2c824 ramips: increase SPI frequency for HIWIFI HC5x61 devices
HIWIFI HC5x61 devices support high speed spi clock up to 100+ MHz.
So set spi frequency to 80 MHz here (Due to frequency division the
real clock is 48 MHz).
I have tested HC5661 and it can run well in OpenWrt v19.07.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
[adjust commit title and wrap message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-21 22:45:20 +01:00
Hauke Mehrtens
1170655f8b uhttpd: update to git HEAD
15346de client: Always close connection with request body in case of error

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-21 22:34:13 +01:00
Hauke Mehrtens
501221af54 uhttpd: Execute uci commit and reload_config once
Instead of doing uci commit and reload_config for each setting do it
only once when one of these options was changed. This should make it a
little faster when both conditions are taken.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-21 22:16:32 +01:00
Hauke Mehrtens
d25d281fd6 uhttpd: Reload config after uhttpd-mod-ubus was added
Without this change the config is only committed, but the uhttpd daemon
is not reloaded. This reload is needed to apply the config. Without the
reload of uhttpd, the ubus server is not available over http and returns
a Error 404.

This caused problems when installing luci on the snapshots and
accessing it without reloading uhttpd.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-21 22:16:31 +01:00
Daniel Golle
310b7f76e8
mediatek: linksys-e8450: remove left-overs from dtsi
There is an ASMedia ASM1480 PCIe switch found on mt7622-rfb1 and the
BPi-R64, allowing the user to switch between SATA and PCIe1 which share
the same pins on the SoC.
This chip is not present on the Linksys E8450, it doesn't have SATA.
Remove definitions for GPIO90 from DTSI to prevent it from being
copy&pasted or otherwise causing confusion.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-21 13:38:42 +00:00
Daniel Golle
241ce95d63
procd: update to git HEAD
7ee4563 procd: Adding support to detect Pantavisor Container Platform

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-21 13:36:58 +00:00
Álvaro Fernández Rojas
f93b544f01 bcm27xx: bcm2711: correctly disable HW_RANDOM_BCM2835
It was removed in bac74aff5e, but it should have been disabled.
More info: https://forum.openwrt.org/t/make-image-stops-at-random-number-generator-bcm27xx/91429/7

Fixes: bac74aff5e ("bcm27xx: bcm2711: disable HW_RANDOM_BCM2835")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-21 12:39:47 +01:00
Paul Spooren
7f4c2b1a4f build,json: fix duplicates in default_packages
Calling without the DUMP=1 argument causes the target specific Makefile
to be "included" again which adds the target specific packages twice,
once on the actual run and once included from `include/target.mk`.

This led to duplicate package entries, causing confusion in downstream
projects using the generated JSON files.

While at it, apply `black` style to Python script.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-03-20 23:58:52 -10:00
Tony Ambardar
2ba0ab1930 kernel: robustify dependencies in kmod-sound-hda-core
Dependency tracking for kmod-sound-hda-core is fragile. Enabling some sound
codecs (Realtek, Conexant, Sigmatel) implicitly adds a kmod-ledtrig-audio
dependency, while an enabled kmod-ledtrig-audio can be picked up through
enabling others (e.g. kmod-sound-hda-intel), and the behaviour can change
across kernel versions.

As kmod-ledtrig-audio is under 2KB, make it an unconditional dependency.

Fixes: a374b8f190 ("kernel: 5.10: update sound modules")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-20 23:57:58 -10:00
Hans Dedecker
956490ad6a glibc: update to latest 2.33 commit
db32fc27e7 test-container: Always copy test-specific support files [BZ #27537]
79c6be6a0a nptl: Remove private futex optimization [BZ #27304]
f90d6b0484 pthread_once hangs when init routine throws an exception [BZ #18435]
dd8023c2ac elf: ld.so --help calls _dl_init_paths without a main map [BZ #27577]
ea5a537e87 elf: Always set l in _dl_init_paths (bug 23462)
64f6c287ad x86: Handle _SC_LEVEL1_ICACHE_LINESIZE [BZ #27444]
32b9280f1d io: Return EBAFD for negative file descriptor on fstat (BZ #27559)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-03-20 21:18:52 +01:00
Philip Prindeville
7fae64cc06 libnfnetlink: quote $(FPIC) on command line
When $(FPIC) gets expanded on the command line (for instance
when setting environment variables for libtool, configure, or
make) we can't count on it not needing quoting (i.e. it could
contain multiple flags separated with spaces).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2021-03-19 13:37:51 -10:00
Daniel Golle
d28880cdd8
umdns: add syscalls needed on Aarch64
Now that ujail supports seccomp also on Aarch64, add missing syscall
'fstat' to the list of allowed syscalls.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-19 22:33:33 +00:00
Daniel Golle
6801ecd91b
procd: update to git HEAD
Enable seccomp features on Aarch64.

 3e88c6f jail/seccomp: add support for aarch64
 c23d8bf trace: fix build on aarch64

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-19 22:33:27 +00:00
Jo-Philipp Wich
f807db006f firewall4: introduce package
This commit introduces firewall4, an nftables based reimplementation of the
UCI iptables firewall.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2021-03-19 20:16:11 +01:00
Jo-Philipp Wich
56f4e54127 ucode: introduce package
This commit introduces ucode, a tiny template processor utilizing a syntax
closely resembling ECMA Script for embedded script blocks.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2021-03-19 20:16:11 +01:00
Hauke Mehrtens
0c0cb97da7 kernel: Add missing kernel config options
These two options are missing when building the x86 target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-19 18:48:32 +01:00
Hauke Mehrtens
0b5a67aa03 kernel: Reorder kernel configuration options
Reorder the options and remove double entries.
This was generated by running this:
$ ./scripts/kconfig.pl '+' target/linux/generic/config-5.10 /dev/null > target/linux/generic/config-5.10.new
$ mv target/linux/generic/config-5.10.new target/linux/generic/config-5.10
$ ./scripts/kconfig.pl '+' target/linux/generic/config-5.4 /dev/null > target/linux/generic/config-5.4.new
$ mv target/linux/generic/config-5.4.new target/linux/generic/config-5.4

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-19 18:38:35 +01:00
Hauke Mehrtens
047b7621bb archs38: Add CONFIG_HZ=100
This kernel config option was missing and resulted in a question when
building.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-19 18:00:22 +01:00
Rosen Penev
a50441b6e9 kernel: add exfat again
With kernel 5.10, exfat is out of staging and in tree.

Added small hack to make it work with kernel 5.4 as well.

Added removed config options for 5.4 to generic config.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[Set CONFIG_EXFAT_ config options to default values]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-19 16:08:12 +01:00
Rosen Penev
5c469e089e package/exfat: remove
Now that kernel 5.10 is in tree, this can be removed.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-03-19 16:00:01 +01:00
Tad Davanzo
b4f76d9f0d mvebu: enable WRT1900AC v1 and WRT32X for buildbots
Kernel size limits have been dealt with.
Effective revert of a1eb2c46 and ac9730c4.

Signed-off-by: Tad Davanzo <tad@spotco.us>
2021-03-19 15:30:01 +01:00
Tad Davanzo
15309f5133 mvebu: venom resize kernel to 6MB
venom has a 3MB kernel partition as specified by the DTS.
3MB is not sufficient for building with many kernel modules or newer
kernel versions.

venom uboot however as set from factory will load up to 6MB.
This can be observed by looking a uboot log:
	NAND read: device 0 offset 0x900000, size 0x600000
	6291456 bytes read: OK
and from uboot environment variables:
	$ fw_printenv | grep "priKernSize";
	priKernSize=0x0600000

Resize the root partitions from 120MB to 117MB to let kernel expand
into it another 3MB.
And set kernel target size to 6MB.

Lastly set the kernel-size-migration compatibility version on venom to
prevent sysupgrading without first reinstalling from a factory image.

Signed-off-by: Tad Davanzo <tad@spotco.us>
2021-03-19 15:30:01 +01:00
Tad Davanzo
10415d5e70 mvebu: mamba resize kernel to 4MB
mamba has a 3MB kernel partition as specified by the DTS.
3MB is not sufficient for building with many kernel modules or newer
kernel versions.

mamba uboot however as set from factory will load up to 4MB.
This can be observed by looking a uboot log:
	NAND read: device 0 offset 0xa00000, size 0x400000
	4194304 bytes read: OK
and from uboot environment variables:
	$ fw_printenv | grep "pri_kern_size";
	pri_kern_size=0x400000

Resize the root partitions from 37MB to 36MB to let kernel expand
into it another 1MB.
And set kernel target size to 4MB.

Lastly add a compatibility version message: kernel-size-migration.
And set it on mamba to prevent sysupgrading without first reinstalling from
a factory image.

Signed-off-by: Tad Davanzo <tad@spotco.us>
2021-03-19 15:30:01 +01:00
Tony Ambardar
72885e9608 iproute2: separate tc into tiny and full variants
This change was investigated previously [1] but not deemed necessary. With
the recent addition [2] of modern BPF loader support, however, tc gained
dependencies on libelf and libbpf, with a larger installation footprint.

Similar to ip-tiny/ip-full, split tc into tc-full and tc-tiny variants,
where the latter excludes the eBPF loader, uses a smaller executable, and
avoids libelf and libbpf package dependencies. Both variants provide the
'tc' virtual package, with tc-tiny as the default.

The previous tc package included a loadable module for iptables actions.
Separate this out into a common package, tc-mod-iptables, which both
variants depend on. Some package sizes on mips_24kc:

Before:
  148343  tc_5.11.0-1_mips_24kc.ipk

After:
  144833  tc-full_5.11.0-2_mips_24kc.ipk
  138430  tc-tiny_5.11.0-2_mips_24kc.ipk  (and no libelf or libbpf)
    4115  tc-mod-iptables_5.11.0-2_mips_24kc.ipk

Also fix up some Makefile indentation.

[1] https://github.com/openwrt/openwrt/pull/1627#issuecomment-447619962
[2] b048a305a3 ("iproute2: update to 5.11.0")

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 15:30:01 +01:00
Tony Ambardar
863ce4f15f kernel/modules: relocate teql hotplug from iproute2 to kmod-sched
The link equalizer sch_teql.ko of package kmod-sched relies on a hotplug
script historically included in iproute2's tc package. In previous
discussion [1], consensus was the hotplug script is best located together
with the module in kmod-sched, but this change was deferred at the time.

Relocate the hotplug script now. This change also simplifies adding a tc
variant for minimal size with reduced functionality.

[1] https://github.com/openwrt/openwrt/pull/1627#issuecomment-447923636

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 15:30:01 +01:00
Tony Ambardar
10ffefe602 iproute2: add missing limits.h includes
This patch has been submitted upstream to fix an error reported by a few
users. One instance seen using gcc 10.2.0, binutils 2.35.1 and musl 1.1.24:

bpf_glue.c: In function 'get_libbpf_version':
bpf_glue.c:46:11: error: 'PATH_MAX' undeclared (first use in this function);
did you mean 'AF_MAX'?
   46 |  char buf[PATH_MAX], *s;
      |           ^~~~~~~~
      |           AF_MAX

Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 15:30:01 +01:00
Tony Ambardar
9662da770e kernel: add missing config symbols, fix typos
Update 5.10 generic config to add missing options prompting during builds,
when setting CONFIG_ALL_KMODS. Refresh the x86 subtargets to drop symbols
added to the generic config.

Also fix a typo in 5.4/5.10 generic configs: "CONFIG_CONFIG_KVM_AMD_SEV".

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 14:02:47 +00:00
Tony Ambardar
a374b8f190 kernel: 5.10: update sound modules
Update file paths for kmod-sound-hda-intel and reflect new dependency of
kmod-sound-hda-core on kmod-ledtrig-audio.

Reported-by: Javier Marcet <javier@marcet.info>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 14:02:47 +00:00
Tony Ambardar
ad11fc8c23 kernel: add kmod-ledtrig-audio
This allows LEDs to be controlled by audio drivers.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 14:02:47 +00:00
Tony Ambardar
66fd9acf50 kernel: 5.10: add missing dependency in kmod-mdio-devres
Add conditional dependency on kmod-of-mdio due to mdio_devres.c code:
  #if IS_ENABLED(CONFIG_OF_MDIO)
  ...
  EXPORT_SYMBOL(devm_of_mdiobus_register);
  #endif /* CONFIG_OF_MDIO */

Fixes: 95a3741d17 ("kernel: support new mdio_devres.ko module in 5.10")
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 14:02:47 +00:00
Tony Ambardar
2a8ae3bf0a kernel: 5.10: update kmod-usb-net-smsc95xx
Add kmod-libphy dependency.

Signed-off-by: Javier Marcet <javier@marcet.info>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 14:02:47 +00:00
Daniel Golle
d0d63162b6
ipq806x: work-around vendor 'rootfs_data' GPT partition
ZyXEL NBG6817 comes with an eMMC which contains a GPT partition named
'rootfs_data'. This currently confuses fstools and makes it pick that
(not suitable) partition.
Use the newly introduced fstools_ignore_partname=1 kernel cmdline
parameter to have fstools ignore that partition.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-19 13:36:02 +00:00
Daniel Golle
2b1aebc0b6
fstools: update to git HEAD
964d1e3 partname: allow skipping existing 'rootfs_data' partition

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-19 13:35:55 +00:00
Álvaro Fernández Rojas
df26c29629 bmips: backport b53 mmap device tree support
This patch has been accepted upstream for linux v5.13.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-19 11:00:19 +01:00
Álvaro Fernández Rojas
a139ab1b82 bmips: backport b53 legacy tags support
These patches have been accepted upstream for linux 5.13.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-19 11:00:19 +01:00
Álvaro Fernández Rojas
d6c5698a71 bmips: backport upstream dsa b53 is63xx patch
This patch has been accepted for linux v5.13.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-19 11:00:19 +01:00
Rosen Penev
85fa8ad8af kexec-tools: update to 2.0.21
kdump was removed in 7acd257ae67b4ca94f8c23cb8bda0ee0709b9216

gdb can be used as an alternative.

Remove autoreconf. It's not needed as the configure files are already
generated.

Remove upstreamed patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-03-19 01:25:26 +01:00
Rosen Penev
6e23813c1e binutils: fix compilation with ccache
For some reason, one of the configure checks results in some infinite
loop and ends up spawning endless gcc processes, causing OOM. Just pass
a configure var to avoid it.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-03-19 01:25:26 +01:00
Ilya Lipnitskiy
f65b0afadb ramips: move spi-nor-add-gd25q512 patch to generic
A SPI NOR flash should not be target-specific, so move it to generic in
case another platform needs to use it.

Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
2021-03-19 01:25:26 +01:00
Rui Salvaterra
b1d0f66388 mac80211: rtl: update RTL8821AE PHY/RF parameters
Create a new directory for Realtek patches and backport the updated PHY and RF
parameters patch. Improves the connectivity in the 5 GHz band [1].

[1] https://patchwork.kernel.org/project/linux-wireless/patch/20210219052607.7323-1-pkshih@realtek.com/#23988567

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-03-19 01:25:26 +01:00
Supriya Mane
eccb45627e x86/64: Iptables seems to lack support for cgroup v2
FS#3574
Adding cgroup support enables adding rules on processes
to limit resources in terms of iptable policies

Signed-off-by: Supriya Mane <sm.supriya@globaledgesoft.com>
2021-03-19 01:25:26 +01:00
Russell Senior
1c04365071 busybox: udhcpc, allow zero length dhcp options
This patch skips zero length DHCP options instead of failing.

Signed-off-by: Russell Senior <russell@personaltelco.net>
2021-03-19 01:25:26 +01:00
Lech Perczak
410fb05b44 rampis: use lzma-loader for ZTE MF283+
Without that, after merging support to master, the device fails to boot
due to LZMA decompression error:

3: System Boot system code via Flash.
## Booting image at bc080000 ...
raspi_read: from:80000 len:40
.   Image Name:   MIPS OpenWrt Linux-5.4.99
   Created:      2021-02-25  23:35:00 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1786664 Bytes =  1.7 MB
   Load Address: 80000000
   Entry Point:  80000000
raspi_read: from:80040 len:1b4328
............................   Verifying Checksum ... OK
   Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover

Use lzma-loader to fix it.

Fixes: 59d065c9f8 ("ramips: add support for ZTE MF283+")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2021-03-19 01:25:26 +01:00
Shiji Yang
a94a20373b ramips: improve GPIO pin control for HC5x61
HC5661 does not have USB port, remove usb power control pin.
HC5x61 do not have LAN LEDs, remove ethernet LED control pin.
Only HC5861 has PA in 2.4G channel.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2021-03-19 01:25:26 +01:00
Tony Ambardar
cbc37d60cb tools/sparse: update to version 0.6.3
Update to the latest stable release.

This fixes a segfault and build failure seen compiling the 5.10 kernel
for x86/64. With this update, builds complete and sparse generates the
usual large volume of warnings as on 5.4 kernels.

Reported-by: Javier Marcet <javier@marcet.info>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 00:59:22 +01:00
Aleksander Jan Bajkowski
12e942b1fd kernel: move some disabled symbols to generic
Move some disabled symbols found in armvirt target to generic.

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-03-19 00:59:22 +01:00
Eike Ritter
46cd0765d0 ppp: compile fix: unset FILTER variable in Makefile
If the environment variable FILTER is set before compilation,
compilation of the ppp-package will fail with the error message

Package ppp is missing dependencies for the following libraries:
libpcap.so.1

The reason is that the OpenWrt-patch for the Makefile only comments
out the line FILTER=y. Hence the pcap-library will be dynamically
linked if the environment variable FILTER is set elsewhere, which
causes compilation to fail. The fix consists on explicitly unsetting
the variable FILTER instead.

Signed-off-by: Eike Ritter <git@rittere.co.uk>
2021-03-19 00:25:58 +01:00
Aleksander Jan Bajkowski
c027dbac5a lantiq: set maximum kernel size for ARV7519RW22
Some users report that current snapshot producies non-bootable images.
Stock uboot can boot images if the kernel is smaller than 2MB.

Set maximum kernel size and disable image building for this board.

Ref: https://forum.openwrt.org/t/astoria-arv7519rw22-bootloops-after-upgrade/89843
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-03-18 16:17:43 +01:00
Felix Fietkau
9ac47ee469 build: use -nostdinc and -isystem in NOSTDINC_FLAGS for out-of-tree kernel modules
This resolves issues uncovered by musl updates

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-03-18 10:53:26 +01:00
Felix Fietkau
acb8c17ecc mt76: update to the latest version
0b6c9a043f78 mt76: move de-amsdu buffer per-phy
48a905e23791 mt76: mt7615: fix CSA event format
fbef8bba038f mt76: mt7921: remove duplicated macros in mcu.h

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-03-18 10:53:26 +01:00