Commit Graph

44647 Commits

Author SHA1 Message Date
Adrian Schmutzler
fcb920ffe7 ath79: Consistently label art partition with lower case
This patch harmonizes the label and alias for art partitions
across ath79. Since lower case seems to be more frequent, use that
consistently.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-06-10 11:25:41 +02:00
Adrian Schmutzler
4d807ad2d9 ath79: Read MAC addresses from flash in 11-ath10k-caldata
In commit c3a8518 eth0 and eth1 have been swapped for some devices,
but 11-ath10k-caldata has not been updated.
Instead of fixing this by swapping eth0/eth1, this patch will read
addresses from flash (as done for several devices already) so
adjustments due to eth order become obsolete.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-06-10 11:25:41 +02:00
Adrian Schmutzler
3d153323ab ath79: Consistently label info partition
The info/product-info partition, which frequently contains MAC
adresses, is typically assigned the 'info' alias in DTS, but
then labelled with 'info', 'product-info' or 'config'.

This leads to different aliases if used for setting MAC adresses
in DTS compared to when using e.g. mtd_get_mac_binary. Occationally,
also multiple switch-case entries are used just because of different
labelling.

This patch relabels those partitions in ath79 to consistently use
'info'.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-06-10 11:25:41 +02:00
Pawel Dembicki
c4fdd4979b mpc85xx: re-enable TL-WDR4900v1 images
This reverts commit 324e94f31b ("mpc85xx: disable bricking TL-WDR4900v1 images")

The previous commit fixes the TL-WDR4900v1. Enable the target again.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-10 11:21:35 +02:00
Christian Lamparter
1e41de2f48 mpc85xx: convert TL-WDR4900 v1 to simpleImage
Converts the TP-Link WDR4900 v1 to use the simpleImage in the
hopes of prolonging the life of the device. While at it,
the patch makes the fdt.bin an ARTIFACT and sets the KERNEL_SIZE
to 2684 KiB as a precaution since the stock u-boot is using a
fixed kernel size.

Note: Give the image some time, it will take much longer to
extract and boot.

[tested for 4.14/4.19]

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Co-authored-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-06-10 11:21:35 +02:00
André Valentin
452d88e8f7 config: add xfrm interface support scripts
This package adds scripts for xfrm interfaces support.
Example configuration via /etc/config/network:

config interface 'xfrm0'
        option proto 'xfrm'
        option mtu '1300'
        option zone 'VPN'
        option tunlink 'wan'
        option ifid 30

config interface 'xfrm0_static'
        option proto 'static'
        option ifname '@xfrm0'
        option ip6addr 'fe80::1/64'
        option ipaddr '10.0.0.1/30'

Now set in strongswan IPsec policy:
 	if_id_in = 30
	if_id_out = 30

Signed-off-by: André Valentin <avalentin@marcant.net>
2019-06-10 10:07:24 +02:00
Hans Dedecker
cc092a285a curl: update to 7.65.1
For changes in 7.65.1; see https://curl.haxx.se/changes.html#7_65_1

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-06-10 10:06:05 +02:00
André Valentin
ae3e232b11 netsupport: add xfrmi interface support
Add support for xfrm interfaces in kernel. XFRM interfaces are used by
the IPsec stack for tunneling.
XFRM interfaces are available since linux 4.19.

Signed-off-by: André Valentin <avalentin@marcant.net>
2019-06-09 21:48:22 +02:00
Petr Štetiar
0e1d07af1d kirkwood: image: fix unwanted 2nd inclusion of kernel
In commit d2e18dae28 ("kirkwood: cleanup image build code") the image
build code was refactored, setting KERNEL_IN_UBI=0 which doesn't work as
the KERNEL_IN_UBI needs to be unset in order to make it working as
intended, which leads to factory images with two kernels in them:

 binwalk --keep-going openwrt-kirkwood-cisco_on100-squashfs-factory.bin
 MD5 Checksum:  c33e3d1eb0cb632bf0a4dc287592eb70
 DECIMAL   	HEX       	DESCRIPTION
 -------------------------------------------------------------------------------
 0         	0x0       	uImage header [...] "ARM OpenWrt Linux-4.14.123"
 5769216   	0x580800  	uImage header [...] "ARM OpenWrt Linux-4.14.123"

Cc: Mathias Kresin <dev@kresin.me>
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=2285
Fixes: d2e18dae28 ("kirkwood: cleanup image build code")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-09 14:51:47 +02:00
Petr Štetiar
6c5bfaac84 gpio-button-hotplug: gpio-keys: fix always missing first event
Commit afc056d7dc ("gpio-button-hotplug: support interrupt
properties") changed the gpio-keys interrupt handling logic in a way,
that it always misses first event, which causes issues with rc.button
scripts, so this patch restores the previous behaviour.

Fixes: afc056d7dc ("gpio-button-hotplug: support interrupt properties")
Reported-by: Kristian Evensen <kristian.evensen@gmail.com>
Tested-by: Kuan-Yi Li <kyli.tw@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [drop state check]
2019-06-09 14:51:47 +02:00
Petr Štetiar
27d234a345 gpio-button-hotplug: fix wrong initial seen value
Currently the generated event contains wrong seen value, when the button
is pressed for the first time:

 rmmod gpio_button_hotplug; modprobe gpio_button_hotplug
 [ pressing the wps key immediately after modprobe ]
 gpio-keys: create event, name=wps, seen=1088, pressed=1

So this patch adds a check for this corner case and makes seen=0 if the
button is pressed for the first time.

Tested-by: Kuan-Yi Li <kyli.tw@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-09 14:51:47 +02:00
Petr Štetiar
33ccfe0e14 gpio-button-hotplug: use pr_debug and pr_err
pr_debug can be used with dynamic debugging.

Tested-by: Kuan-Yi Li <kyli.tw@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-09 14:51:47 +02:00
Yousong Zhou
0299a4b73e dnsmasq: skip options that are not compiled in
This is to make life easier for users with customized build of
dnsmasq-full variant.  Currently dnsmasq config generated by current
service script will be rejected by dnsmasq build lacking DHCP feature

 - Options like --dhcp-leasefile have default values.  Deleting them
   from uci config or setting them to empty value will make them take on
   default value in the end
 - Options like --dhcp-broadcast are output unconditionally

Tackle this by

 - Check availablility of features from output of "dnsmasq --version"
 - Make a list of options guarded by HAVE_xx macros in src/options.c of
   dnsmasq source code
 - Ignore these options in xappend()

Two things to note in this implementation

 - The option list is not exhaustive.  Supposedly only those options that
   may cause dnsmasq to reject with "unsupported option (check that
   dnsmasq was compiled with DHCP/TFTP/DNSSEC/DBus support)" are taken
   into account here
 - This provides a way out but users' cooperation is still needed.  E.g.
   option dnssec needs to be turned off, otherwise the service script
   will try to add --conf-file pointing to dnssec specific anchor file
   which dnsmasq lacking dnssec support will reject

Resolves FS#2281

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-06-09 08:17:52 +00:00
Hans Dedecker
6b762dd75f netifd: xfrm tunnel support
8c6358b netifd: add xfrm tunnel interface support

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-06-08 21:51:37 +02:00
Konstantin Demin
10011f91c5 busybox: add ALTERNATIVES for brctl
Busybox brctl applet conflicts with the version from bridge-utils.
Fix this by using ALTERNATIVE support for brctl in busybox.

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2019-06-08 13:51:40 +02:00
Deng Qingfang
0f4e65ec7b tools/ccache: update to 3.7.1
Update ccache to 3.7.1

Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_1

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-06-08 09:59:25 +02:00
Chen Minqiang
de1431b589 kernel: re-add bridge allow reception on disabled port
The "bridge allow reception on disabled port" implementation
was broken after these commits:

08802d93e2 ("kernel: bump 4.19 to 4.19.37")
b765f4be40 ("kernel: bump 4.14 to 4.14.114")
456f486b53 ("kernel: bump 4.9 to 4.9.171")

This leads to issues when for example WDS is used, tied to a bridge:

[ 96.503771] wlan1: send auth to d4:5f:25:eb:09:82 (try 1/3)
[ 96.517956] wlan1: authenticated
[ 96.526209] wlan1: associate with d4:5f:25:eb:09:82 (try 1/3)
[ 97.086156] wlan1: associate with d4:5f:25:eb:09:82 (try 2/3)
[ 97.200919] wlan1: RX AssocResp from d4:5f:25:eb:09:82 (capab=0x11 status=0 aid=1)
[ 97.208706] wlan1: associated
[ 101.312913] wlan1: deauthenticated from d4:5f:25:eb:09:82 (Reason: 2=PREV_AUTH_NOT_VALID)

It seems upstream introduced a new patch, [1]
so we have to reimplement these patches properly:

target/linux/generic/pending-4.9/150-bridge_allow_receiption_on_disabled_port.patch
target/linux/generic/pending-4.14/150-bridge_allow_receiption_on_disabled_port.patch
target/linux/generic/pending-4.19/150-bridge_allow_receiption_on_disabled_port.patch

[1] https://lkml.org/lkml/2019/4/24/1228

Fixes: 08802d93e2 ("kernel: bump 4.19 to 4.19.37")
Fixes: b765f4be40 ("kernel: bump 4.14 to 4.14.114")
Fixes: 456f486b53 ("kernel: bump 4.9 to 4.9.171")
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
[updated commit message and title]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-07 18:22:20 +02:00
Kevin Darbyshire-Bryant
021a9b4cb9 iproute2: add tc action ctinfo support
Add the userspace control portion of the backported kernelspace
act_ctinfo.

ctinfo is a tc action restoring data stored in conntrack marks to
various fields.  At present it has two independent modes of operation,
restoration of DSCP into IPv4/v6 diffserv and restoration of conntrack
marks into packet skb marks.

It understands a number of parameters specific to this action in
additional to the usual action syntax.  Each operating mode is
independent of the other so all options are optional, however not
specifying at least one mode is a bit pointless.

Usage: ... ctinfo [dscp mask [statemask]] [cpmark [mask]] [zone ZONE]
		  [CONTROL] [index <INDEX>]

DSCP mode

dscp enables copying of a DSCP stored in the conntrack mark into the
ipv4/v6 diffserv field.  The mask is a 32bit field and specifies where
in the conntrack mark the DSCP value is located.  It must be 6
contiguous bits long. eg. 0xfc000000 would restore the DSCP from the
upper 6 bits of the conntrack mark.

The DSCP copying may be optionally controlled by a statemask.  The
statemask is a 32bit field, usually with a single bit set and must not
overlap the dscp mask.  The DSCP restore operation will only take place
if the corresponding bit/s in conntrack mark ANDed with the statemask
yield a non zero result.

eg. dscp 0xfc000000 0x01000000 would retrieve the DSCP from the top 6
bits, whilst using bit 25 as a flag to do so.  Bit 26 is unused in this
example.

CPMARK mode

cpmark enables copying of the conntrack mark to the packet skb mark.  In
this mode it is completely equivalent to the existing act_connmark
action.  Additional functionality is provided by the optional mask
parameter, whereby the stored conntrack mark is logically ANDed with the
cpmark mask before being stored into skb mark.  This allows shared usage
of the conntrack mark between applications.

eg. cpmark 0x00ffffff would restore only the lower 24 bits of the
conntrack mark, thus may be useful in the event that the upper 8 bits
are used by the DSCP function.

Usage: ... ctinfo [dscp mask [statemask]] [cpmark [mask]] [zone ZONE]
		  [CONTROL] [index <INDEX>]
where :
	dscp MASK is the bitmask to restore DSCP
	     STATEMASK is the bitmask to determine conditional restoring
	cpmark MASK mask applied to restored packet mark
	ZONE is the conntrack zone
	CONTROL := reclassify | pipe | drop | continue | ok |
		   goto chain <CHAIN_INDEX>

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-06-07 12:05:32 +01:00
Kevin Darbyshire-Bryant
b8a72dfd28 kernel: backport act_ctinfo
ctinfo is a new tc filter action module.  It is designed to restore
information contained in firewall conntrack marks to other packet fields
and is typically used on packet ingress paths.  At present it has two
independent sub-functions or operating modes, DSCP restoration mode &
skb mark restoration mode.

The DSCP restore mode:

This mode copies DSCP values that have been placed in the firewall
conntrack mark back into the IPv4/v6 diffserv fields of relevant
packets.

The DSCP restoration is intended for use and has been found useful for
restoring ingress classifications based on egress classifications across
links that bleach or otherwise change DSCP, typically home ISP Internet
links.  Restoring DSCP on ingress on the WAN link allows qdiscs such as
but by no means limited to CAKE to shape inbound packets according to
policies that are easier to set & mark on egress.

Ingress classification is traditionally a challenging task since
iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
lookups, hence are unable to see internal IPv4 addresses as used on the
typical home masquerading gateway.  Thus marking the connection in some
manner on egress for later restoration of classification on ingress is
easier to implement.

Parameters related to DSCP restore mode:

dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the
conntrack mark field contain the DSCP value to be restored.

statemask - a 32 bit mask of (usually) 1 bit length, outside the area
specified by dscpmask.  This represents a conditional operation flag
whereby the DSCP is only restored if the flag is set.  This is useful to
implement a 'one shot' iptables based classification where the
'complicated' iptables rules are only run once to classify the
connection on initial (egress) packet and subsequent packets are all
marked/restored with the same DSCP.  A mask of zero disables the
conditional behaviour ie. the conntrack mark DSCP bits are always
restored to the ip diffserv field (assuming the conntrack entry is found
& the skb is an ipv4/ipv6 type)

e.g. dscpmask 0xfc000000 statemask 0x01000000

|----0xFC----conntrack mark----000000---|
| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
| DSCP       | unused | flag  |unused   |
|-----------------------0x01---000000---|
      |                   |
      |                   |
      ---|             Conditional flag
         v             only restore if set
|-ip diffserv-|
| 6 bits      |
|-------------|

The skb mark restore mode (cpmark):

This mode copies the firewall conntrack mark to the skb's mark field.
It is completely the functional equivalent of the existing act_connmark
action with the additional feature of being able to apply a mask to the
restored value.

Parameters related to skb mark restore mode:

mask - a 32 bit mask applied to the firewall conntrack mark to mask out
bits unwanted for restoration.  This can be useful where the conntrack
mark is being used for different purposes by different applications.  If
not specified and by default the whole mark field is copied (i.e.
default mask of 0xffffffff)

e.g. mask 0x00ffffff to mask out the top 8 bits being used by the
aforementioned DSCP restore mode.

|----0x00----conntrack mark----ffffff---|
| Bits 31-24 |                          |
| DSCP & flag|      some value here     |
|---------------------------------------|
			|
			|
			v
|------------skb mark-------------------|
|            |                          |
|  zeroed    |                          |
|---------------------------------------|

Overall parameters:

zone - conntrack zone

control - action related control (reclassify | pipe | drop | continue |
ok | goto chain <CHAIN_INDEX>)

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make suitable adjustments for backporting to 4.14 & 4.19
and add to SCHED_MODULES_FILTER

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-06-06 15:41:07 +01:00
Biwen Li
5159d71983 layerscape: update patches-4.14 to LSDK 19.03
All patches of LSDK 19.03 were ported to Openwrt kernel.
We still used an all-in-one patch for each IP/feature for
OpenWrt.

Below are the changes this patch introduced.
- Updated original IP/feature patches to LSDK 19.03.
- Added new IP/feature patches for eTSEC/PTP/TMU.
- Squashed scattered patches into IP/feature patches.
- Updated config-4.14 correspondingly.
- Refreshed all patches.

More info about LSDK and the kernel:
- https://lsdk.github.io/components.html
- https://source.codeaurora.org/external/qoriq/qoriq-components/linux

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:09 +02:00
Biwen Li
639d127b83 layerscape: fix u-boot bootcmd
Current latest LSDK-19.03 u-boot had a bug that bootcmd
environment was always been reset when u-boot started up.
This was found on boards with spi NOR boot. Before the
proper fix-up is applied, we have to use a workaround
to hard code the bootcmd for OpenWrt booting for now.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:09 +02:00
Yangbo Lu
8468bf04d0 layerscape: drop ppa package
Drop ppa package since TF-A is used instead.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:09 +02:00
Biwen Li
c07d3302b3 layerscape: convert to use TF-A for firmware
This patch is to convert to use TF-A for firmware.
- Use un-swapped rcw since swapping will be done in TF-A.
- Use u-boot with TF-A defconfig.
- Rework memory map for TF-A introduction.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:09 +02:00
Biwen Li
17dcbe1b8e layerscape: add ARM Trusted Firmware package
Add TF-A packages for Layerscape to implement trusted firmware.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
f7f1f39c34 layerscape: add rcw packages for ls1043ardb/ls1046ardb SD boot
Add rcw packages for ls1043ardb/ls1046ardb SD boot.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Yangbo Lu
b4b53cd39b layerscape: drop armv8_32b support
NXP LSDK has decided to drop armv8_32b support considering
few users are using it.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Yangbo Lu
9ad7c53383 layerscape: update restool to LSDK 19.03
Update restool to LSDK 19.03.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
4b4b686b1d layerscape: update u-boot to LSDK 19.03
Update u-boot to LSDK 19.03.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
fbb865099b layerscape: update ppfe-firmware to LSDK 19.03
Update ppfe-firmware to LSDK 19.03.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
f4f4b053b9 layerscape: update ls-rcw to LSDK 19.03
Update ls-rcw to LSDK 19.03.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
584611e076 layerscape: update ls-mc to LSDK 19.03
Update to ls-mc to LSDK 19.03.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
1efc6f3515 layerscape: update ls-dpl to LSDK 19.03
Update ls-dpl to LSDK 19.03.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
5dd307afef layerscape: update fman-ucode to LSDK 19.03
The source code was same from lsdk-1806 to lsdk-1903.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Yangbo Lu
d32ca55492 layerscape: remove POSIX_MQUEUE configs
The POSIX_MQUEUE configs had been handled by OpenWrt
configuration.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Yangbo Lu
65adf759b5 kernel: handle CFQ_GROUP_IOSCHED/CGROUP_HUGETLB in config-4.14
The generic config-4.14 should handle below configs.
- CONFIG_CFQ_GROUP_IOSCHED
- CONFIG_CGROUP_HUGETLB

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Sebastian Meiling
239b79f668 kernel: add package for atusb wpan module
This adds a new package for the kernel module of the ATUSB WPAN driver.

Signed-off-by: Sebastian Meiling <s@mlng.net>
[fixed SoB: and From: mismatch]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-06 15:40:08 +02:00
Daniel Gonzalez Cabanelas
d1a015f8ca brcm63xx: DVA-G3810BN/TL: Fix the WAN ethernet port
The WAN port has the wrong configuration in the kernel for the DVA-G3810BN/TL

The WAN port uses the internal phy, but it isn't enabled at the kernel board data.

Fix it.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2019-06-06 12:05:51 +02:00
Roman Yeryomin
94464cfca2 build: fix external module symbol collection if build_dir is a symlink
e26ffb31df fixed only embedded modules
symbol collection. If we are building external modules, like broadcom-wl
or lantiq dsl stuff then modules which do EXPORT_SYMBOL have unresolved
paths in Module.symvers and external module which depend on other
external modules will have empty dependencies, leading to broken
module loading.
This was discussed on IRC with Jonas some time ago.
Fix this by handling both resolved and unresolved paths.

Fixes: e26ffb31df ("build: fix module symbol collection if build_dir is a symlink")
Signed-off-by: Roman Yeryomin <roman@advem.lv>
[jonas.gorski@gmail.com: add appropriate fixes tag]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2019-06-06 12:05:51 +02:00
Kevin Darbyshire-Bryant
24e09bac48 Revert "kernel: backport act_ctinfo"
This reverts commit 7c50182e0c.

Produces build error:
Package kmod-sched is missing dependencies for the following libraries:
nf_conntrack.ko

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-06-06 10:45:15 +01:00
Jo-Philipp Wich
f664d560df rpcd: fix init script reload action
Drop the legacy start() and stop() procedures and define a proper
reload signal action instead.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-06-06 11:27:11 +02:00
Kevin Darbyshire-Bryant
7c50182e0c kernel: backport act_ctinfo
ctinfo is a new tc filter action module.  It is designed to restore
information contained in firewall conntrack marks to other packet fields
and is typically used on packet ingress paths.  At present it has two
independent sub-functions or operating modes, DSCP restoration mode &
skb mark restoration mode.

The DSCP restore mode:

This mode copies DSCP values that have been placed in the firewall
conntrack mark back into the IPv4/v6 diffserv fields of relevant
packets.

The DSCP restoration is intended for use and has been found useful for
restoring ingress classifications based on egress classifications across
links that bleach or otherwise change DSCP, typically home ISP Internet
links.  Restoring DSCP on ingress on the WAN link allows qdiscs such as
but by no means limited to CAKE to shape inbound packets according to
policies that are easier to set & mark on egress.

Ingress classification is traditionally a challenging task since
iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
lookups, hence are unable to see internal IPv4 addresses as used on the
typical home masquerading gateway.  Thus marking the connection in some
manner on egress for later restoration of classification on ingress is
easier to implement.

Parameters related to DSCP restore mode:

dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the
conntrack mark field contain the DSCP value to be restored.

statemask - a 32 bit mask of (usually) 1 bit length, outside the area
specified by dscpmask.  This represents a conditional operation flag
whereby the DSCP is only restored if the flag is set.  This is useful to
implement a 'one shot' iptables based classification where the
'complicated' iptables rules are only run once to classify the
connection on initial (egress) packet and subsequent packets are all
marked/restored with the same DSCP.  A mask of zero disables the
conditional behaviour ie. the conntrack mark DSCP bits are always
restored to the ip diffserv field (assuming the conntrack entry is found
& the skb is an ipv4/ipv6 type)

e.g. dscpmask 0xfc000000 statemask 0x01000000

|----0xFC----conntrack mark----000000---|
| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
| DSCP       | unused | flag  |unused   |
|-----------------------0x01---000000---|
      |                   |
      |                   |
      ---|             Conditional flag
         v             only restore if set
|-ip diffserv-|
| 6 bits      |
|-------------|

The skb mark restore mode (cpmark):

This mode copies the firewall conntrack mark to the skb's mark field.
It is completely the functional equivalent of the existing act_connmark
action with the additional feature of being able to apply a mask to the
restored value.

Parameters related to skb mark restore mode:

mask - a 32 bit mask applied to the firewall conntrack mark to mask out
bits unwanted for restoration.  This can be useful where the conntrack
mark is being used for different purposes by different applications.  If
not specified and by default the whole mark field is copied (i.e.
default mask of 0xffffffff)

e.g. mask 0x00ffffff to mask out the top 8 bits being used by the
aforementioned DSCP restore mode.

|----0x00----conntrack mark----ffffff---|
| Bits 31-24 |                          |
| DSCP & flag|      some value here     |
|---------------------------------------|
			|
			|
			v
|------------skb mark-------------------|
|            |                          |
|  zeroed    |                          |
|---------------------------------------|

Overall parameters:

zone - conntrack zone

control - action related control (reclassify | pipe | drop | continue |
ok | goto chain <CHAIN_INDEX>)

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make suitable adjustments for backporting to 4.14 & 4.19

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-06-06 09:41:26 +01:00
Petr Štetiar
dc8ec266dd rpcd: update to the latest git head
89bfaa424606 Fix possible linker errors by using CMake find_library macro
 569284a119f9 session: handle NULL return values of crypt()

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-06 10:16:22 +02:00
Koen Vandeputte
66d1c29655 kernel: bump 4.19 to 4.19.48
Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-05 12:12:59 +02:00
Petr Štetiar
df34f29fcc kernel: generic: make kernel-debug.tar.bz2 usable again
This patch removes 202-reduce_module_size.patch which is causing missing
debug symbols in kernel modules, leading to unusable
kernel-debug.tar.bz2 on all platforms, making debugging of release
kernel crashes difficult.

Cc: Felix Fietkau <nbd@nbd.name>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-05 10:26:34 +02:00
Chuanhong Guo
0ab9f283f7 ramips: add support for TOTOLINK LR1200
Specifications:
- SoC: MT7628DAN (MT7628AN with 64MB built-in RAM)
- Flash: 8M SPI NOR
- Ethernet: 5x 10/100Mbps
- WiFi: 2.4G: MT7628 built-in
        5G: MT7612E
- 1x miniPCIe slot for LTE modem (only USB pins connected)
- 1x SIM slot

Flash instruction:
U-boot has a builtin web recovery page:
1. Hold the reset button while powering it up
2. Connect to the ethernet and set an IP in 192.168.1.0/24 range
3. Open your browser and upload firmware through http://192.168.1.1

Note about the LTE modem:
If your router comes with an EC25 module and it doesn't show up
as a QMI device, you should do the following to switch it to QMI
mode:
1. Install kmod-usb-serial-option and a terminal software
   (e.g. minicom or screen). All 4 serial ports of the modem
   should be available now.
2. Open /dev/ttyUSB3 with the terminal software and type this
   AT command: AT+QCFG="usbnet",0
3. Power-cycle the router. You should now get a QMI device
   recognized.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-06-05 10:26:33 +02:00
Rytis Zigmantavičius
64493d42b4 ath79: add support for 8devices Carambola2 development board
Specifications:
- Atheros AR9331 (400 MHz)
- 64 MB of RAM (DDR2)
- 16 MB of Flash (SPI)
- 1T1R 2.4 Wlan (AR9331)
- 2x 10/100 Mbps Ethernet
- 3x LEDs, 1x gpio button
- 1x USB 2.0, 5V
- UART over usb, 115200n8

Upgrading from ar71xx target:
- Put image into board:
    scp openwrt-ath79-generic-8dev_carambola2-squashfs-sysupgrade.bin \
        root@192.168.1.1/tmp/
- Run sysupgrade
    sysupgrade /tmp/sysupgrade.bin

Upgrading from u-boot:
- Set up tftp server with sysupgrade.bin image
- Go to u-boot (reboot and press ESC when prompted)
- Set TFTP server IP
    setenv serverip 192.168.1.254
- Set device ip from same subnet
    setenv ipaddr 192.168.1.1
- Copy new firmware to board
    tftpboot 0x81000000 sysupgrade.bin
- erase flash
    erase 0x9f050000 +${filesize}
- flash firmware
    cp.b 0x81000000 0x9f050000 ${filesize}
- Reset board
    reset

Signed-off-by: Rytis Zigmantavičius <rytis.z@8devices.com>
[wrapped long line in commit description, whitespace and art address
 fix in DTS, keep default lan/wan setup, removed -n in sysupgrade]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-05 10:24:45 +02:00
Kristian Evensen
046263095e ath79: Add support for ZBT-WD323
ZBT-WD323 is a dual-LTE router based on AR9344. The detailed
specifications are:

* AR9344 560MHz/450MHz/225MHz (CPU/DDR/AHN).
* 128 MB RAM
* 16MB of flash(SPI-NOR, 22MHz)
* 1x 2.4GHz wifi (Atheros AR9340)
* 3x 10/100Mbos Ethernet (AR8229)
* 1x USB2.0 port
* 2x miniPCIe-slots (USB2.0 only)
* 2x SIM slots (standard size)
* 4x LEDs (1 gpio controlled)
* 1x reset button
* 1x 10 pin terminal block (RS232, RS485, 4x GPIO)
* 2x CP210x UART bridge controllers (used for RS232 and RS485)
* 1x 2 pin 5mm industrial interface (input voltage 12V~36V)
* 1x DC jack
* 1x RTC (PCF8563)

Tested:
- Ethernet switch
- Wifi
- USB port
- MiniPCIe-slots (+ SIM slots)
- Sysupgrade
- Reset button
- RS232

Intallation and recovery:

The board ships with OpenWRT, but sysupgrade does not work as a
different firmware format than what is expected is generated.  The
easiest way to install (and recover) the router, is to use the
web-interface provided by the bootloader (Breed).

While the interface is in Chinese, it is easy to use. First, in order to
access the interface, you need to hold down the reset button for around
five seconds. Then, go to 192.168.1.1 in your browser. Click on the
second item in the list on the left to access the recovery page. The
second item on the next page is where you select the firmware.  Select
the menu item containing "Atheros SDK" and "16MB" in the dropdown close
to the buttom, and click on the button at the bottom to start
installation/recovery.

Notes:
* RS232 is available on /dev/ttyUSB0 and RS485 on /dev/ttyUSB1

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
[removed unused poll-interval from gpio-keys, i2c-gpio 4.19 compat]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-05 10:24:36 +02:00
Chuanhong Guo
c3a8518918 ath79: fix default config for devices with eth0/eth1 swapped
also fix the following problems in this commit:
glinet,gl-ar150: This router uses an uncommon order of setting up gmacs
                 in ar71xx. gmac0 is preferred to be wan port because of
                 the additional link status info available. So this
                 router will have eth0/eth1 swapped comparing to ar71xx.
tplink,tl-wr710n-v1: same as gl-ar150
embeddedwireless,dorin: eth0 is used as switch port, which was incorrect.
                        It's correct now, so keep this one untouched.
tplink,tl-wr842n-v1: we don't swap PHYs on ar7241 so the original port order
                     is incorrect.
reorder archer-a7-v5 entry.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-06-05 10:12:31 +02:00
Chuanhong Guo
8dde11d521 ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
With a proper probe deferring for ag71xx we don't need to explicitly
probe mdio1 before gmac0.
Drop all "simple-mfd" in SoC dtsi so that gmac orders can be the same
as ar71xx.
This makes eth0/eth1 order the same as those in ar71xx, which means
we don't need a migration script for this anymore and we can merge
incorrectly split gmac/mdio driver back together.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-06-05 10:12:31 +02:00
Chuanhong Guo
32817580e7 ath79: ag71xx: defer probe if of_phy_connect failed
gmac0 may need a phy on builtin switch, which can be unavailable
if gmac0 is probed before builtin switch.
Return -EPROBE_DEFER in this case so that gmac0 can be probed
later.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-06-05 10:12:31 +02:00