Commit Graph

1058 Commits

Author SHA1 Message Date
Daniel Golle
ebcb4f1d0a
treewide: fix spelling 'seperate' -> 'separate'
This popular spelling mistake was also introduced by myself lately.
Fix it everywhere.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-28 23:59:21 +00:00
David Bauer
9a9cf40dd9 download: add mirror alias for Debian
Add an alias for Debian packages and download them from the Debian
mirror redirector.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-26 20:41:00 +01:00
David Bauer
01c01d9861 download: use mirror redirector for GNOME downloads
Use the GNOME mirror redirector as the primary download source for GNOME
packages.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-26 20:41:00 +01:00
Adrian Schmutzler
ef2cb8572b treewide: rename IMAGE_PREFIX/IMAGE_NAME to DEVICE_IMG_*
We so far had two variables IMG_PREFIX and IMAGE_PREFIX with
different content. Since these names are obviously quite
confusing, this patch renames the latter to DEVICE_IMG_PREFIX,
as it's a device-dependent variable, while IMG_PREFIX is only
(sub)target-dependent.

For consistency, also rename IMAGE_NAME to DEVICE_IMG_NAME, as
that's a device-dependent variable as well.

Cc: Paul Spooren <mail@aparcar.org>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-25 18:11:06 +01:00
Daniel Golle
330bd380e8 image: allow building FIT and uImage with ramdisk
Instead of embedding the initrd cpio archive into the kernel, allow
for having an external ramdisk added to the FIT or uImage.
This is useful to overcome kernel size limitations present in many
stock bootloaders, as the ramdisk is then loaded seperately and doesn't
add to the kernel size. Hence we can have larger ramdisks to host ie.
installers with all binaries to flash included (or a web-based
firmware selector).
In terms of performance and total size the differences are neglectible.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-24 01:35:20 +00:00
Daniel Golle
e6aac8d98f image: add support for building FIT image with filesystem
Allow for single (external-data) FIT image to hold kernel, dtb and
squashfs. In that way, the bootloader verifies the system integrity
including the rootfs, because what's the point of checking that the
hash of the kernel is correct if it won't boot in case of squashfs
being corrupted? Better allow bootloader to check everything needed
to make it at least up to failsafe mode. As a positive side effect
this change also makes the sysupgrade process on nand potentially
much easier as it is now.
In short: mkimage has a parameter '-E' which allows generating FIT
images with 'external' data rather than embedding the data into the
device-tree blob itself. In this way, the FIT structure itself remains
small and can be parsed easily (rather than having to page around
megabytes of image content). This patch makes use of that and adds
support for adding sub-images of type 'filesystem' which are used to
store the squashfs. Now U-Boot can verify the whole OS and the new
partition parsers added in the Linux kernel can detect the filesystem
sub-images, create partitions for them, and select the active rootfs
volume based on the configuration in FIT (passing configuration via
device tree could be implemented easily at a later stage).

This new FIT partition parser works for NOR flash (on top of mtdblock),
NAND flash (on top of ubiblock) as well as classic block devices
(ie. eMMC, SDcard, SATA, NVME, ...).
It could even be used to mount such FIT images via `losetup -P` on a
user PC if this patch gets included in Linux upstream one day ;)

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-24 01:35:20 +00:00
David Bauer
f04e007491 download: remove broken mirrors
These mirrors don't exist anymore. Remove them.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-22 00:57:04 +01:00
Felix Fietkau
075fa4cd9a Mostly revert "build: add support for fixing up library soname"
This reverts commit b12288fa69.
The patchelf approach is too fragile, and the only users of this have been
converted to make patching unnecessary
Leave the abi_version_str variable in place in rules.mk

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-02-15 18:47:21 +01:00
Felix Fietkau
c921650382 build: drop ABI version from metadata
Preparation for supporting dynamic ABI versions that depend on the runtime
configuration. Read the suffix from the staging dir pkginfo version files.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-02-14 19:41:52 +01:00
Felix Fietkau
b12288fa69 build: add support for fixing up library soname
This makes it possible to declare a package ABI_VERSION independent from the
upstream soname by setting PKG_ABI_VERSION in the package makefile.
The library filename is fixed up for files installed to packages and to the
staging dir. References to the original from executables within the same
package are also fixed up

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-02-14 19:41:51 +01:00
Paul Spooren
6d5425976f scripts: fix checkpatch.pl for changed license dir
As multiple LICENSES are shipped and no longer just LICENSE, modify the
OpenWrt tree detection in checkpatch.pl.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-02-14 19:21:38 +01:00
Paul Spooren
8286f3a3d3 treewide: unify OpenWrt hosted source via @OPENWRT
Multiple sources are hosted on OpenWrts source server only. The source
URLs to point to the server vary based on different epochs in OpenWrts
history.

Replace all by @OPENWRT which is an "empty" mirror, therefore using the
fallback servers sources.cdn.openwrt.org and sources.openwrt.org.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-02-05 12:00:24 -10:00
Paul Spooren
7521aedff4 scripts: sources CDN as fallback in download.pl
In case the default sources for a package fail use the CDN rather than
our own mirror. In case the CDN fails, fallback to our mirror.

Also remove mirror1 which isn't available anymore.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-01-27 22:46:08 -10:00
Paul Spooren
4dad324429 scripts: target-metadata don't add PROFILES twice
Since 4ee3cf2b5a profiles with alternative vendor names may appear
multiple times in `tmp/.targetinfo` or `.targetinfo` (for
ImageBuilders).

The `target-metadata.pl` script adds these profiles then twice to
`PROFILE_NAMES` and the ImageBuilder show the profile twice when running
`make info`.

This patch removes duplicate profile IDs and only adds them once to
`.profiles.mk`.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-01-14 22:42:21 -10:00
Paul Spooren
a323a653f0 scripts/feed: no warn on toolchain/linux overwrite
The recent 7f285d "scripts/feeds: warn when skipping core package
override" floods SDK output with warning of overwriting "linux" and
"toolchain" core packages. This should be ignored as these are not
regular packages added via feeds.

While at it slightly improve the warning string.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-01-06 14:04:34 -10:00
Kevin Darbyshire-Bryant
e2180e3cbe build: drop clang wrapper
clang's gcc emulation does the right thing with -print-file-name now,
drop the wrapper

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-01-05 08:59:59 +00:00
Paul Spooren
1b002434f0 scripts/qemustart: use squashfs instead of ext4
The qemustart script currently picks the ext4 filesystem rather than
squashfs, while the latter is default for nearly all OpenWrt targets.

Change the default behaviour of qemustart to be in line with the rest.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-01-01 17:49:05 -10:00
Marek Lindner
4871fd2616 ipq40xx: add support for Plasma Cloud PA2200
Device specifications:

* QCA IPQ4019
* 256 MB of RAM
* 32 MB of SPI NOR flash (w25q256)
  - 2x 15 MB available; but one of the 15 MB regions is the recovery image
* 2T2R 2.4 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=PlasmaCloud-PA2200
* 2T2R 5 GHz (channel 36-64)
  - QCA9888 hw2.0 (PCI)
  - requires special BDF in QCA9888/hw2.0/board-2.bin
    bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200
* 2T2R 5 GHz (channel 100-165)
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=PlasmaCloud-PA2200
* GPIO-LEDs for 2.4GHz, 5GHz-SoC and 5GHz-PCIE
* GPIO-LEDs for power (orange) and status (blue)
* 1x GPIO-button (reset)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x gigabit ethernet
  - phy@mdio3:
    + Label: Ethernet 1
    + gmac0 (ethaddr) in original firmware
    + used as LAN interface
  - phy@mdio4:
    + Label: Ethernet 2
    + gmac1 (eth1addr) in original firmware
    + 802.3at POE+
    + used as WAN interface
* 12V 2A DC

Flashing instructions:

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai>
[sven@narfation.org: prepare commit message, rebase, use all LEDs, switch
to dualboot_datachk upgrade script, use eth1 as designated WAN interface]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
Marek Lindner
ea5bb6bbfe ipq40xx: add support for Plasma Cloud PA1200
Device specifications:

* QCA IPQ4018
* 256 MB of RAM
* 32 MB of SPI NOR flash (w25q256)
  - 2x 15 MB available; but one of the 15 MB regions is the recovery image
* 2T2R 2.4 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200
* 2T2R 5 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200
* 3x GPIO-LEDs for status (cyan, purple, yellow)
* 1x GPIO-button (reset)
* 1x USB (xHCI)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x gigabit ethernet
  - phy@mdio4:
    + Label: Ethernet 1
    + gmac0 (ethaddr) in original firmware
    + used as LAN interface
  - phy@mdio3:
    + Label: Ethernet 2
    + gmac1 (eth1addr) in original firmware
    + 802.3af/at POE(+)
    + used as WAN interface
* 12V/24V 1A DC

Flashing instructions:

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai>
[sven@narfation.org: prepare commit message, rebase, use all LEDs, switch
to dualboot_datachk upgrade script, use eth1 as designated WAN interface]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
Sven Eckelmann
5fc28ef479 ath79: Add support for Plasma Cloud PA300
Device specifications:

* Qualcomm/Atheros QCA9533 v2
* 650/600/217 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash (mx25l12805d)
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + Label: Ethernet 1
    + 24V passive POE (mode B)
    + used as WAN interface
  - eth1
    + Label: Ethernet 2
    + 802.3af POE
    + builtin switch port 2
    + used as LAN interface
* 12-24V 1A DC
* internal antennas

Flashing instructions:

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
Sven Eckelmann
3599ea5263 images: Fix sysupgrade.tar for devices with NOR flash
The NOR flash rootfs images stored in a sysupgrade.tar must end with the
JFFS2 marker. Otherwise, devices like OpenMesh A42/A62 are not able to
calculate the md5sum of the fixed squashfs part and store it inside the
u-boot-env.

But the commit ee76bd11bb ("images: fix boot failures on NAND with small
sub pages") adds up to 1020 0x00 bytes after the 0xdead0de EOF marker. The
calculated md5sum will be wrong due do this change and u-boot will fail to
boot the newly flashed device with a message like:

  Validating MD5Sum of 'vmlinux'...
  Passed!
  Validating MD5Sum of 'rootfs'...
  Failed!
      583a1b7b54b8601efa64ade42742459b != 8850ee812dfd7638e94083329d5d2781

  Data validation failed!

and boot the old image again.

Since the original change should not change the behavior of NOR images,
just check for the deadc0de marker at the end of the squashfs-jffs2 image
do avoid the problematic behavior for these images.

Fixes: ee76bd11bb ("images: fix boot failures on NAND with small sub pages")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
Sven Eckelmann
a4c30d9399 scripts/om-fwupgradecfg-gen.sh: Generate checksum over whole squashfs
The rootfs is padded to the full block size by padjffs2 and a 4 byte magic
value ("deadc0de") is added to the end. On first boot, the JFFS2 is
replacing the "deadc0de" marker when the rootfs_data is initialized.

The static part of the rootfs is therefore $rootfs_size - 4 and not
$rootfs_size - 262144 - 4.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
Sven Eckelmann
7c75eaadfc scripts/om-fwupgradecfg-gen.sh: Drop block alignment code
The padding and block alignment is handled by the image build script and
doesn't need to be duplicated in the fwupgrade.cfg build script.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-12-22 19:11:50 +01:00
INAGAKI Hiroshi
fdcdbdfdef scripts: add -N option to mkhash for printing without newline
Added "-N" option, it allow printing hash(es) without newline.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2020-12-22 19:11:50 +01:00
Paul Spooren
bc0ffff36a build/json: add filesystem information
Some images are created using different filesystems, most popular
squashfs and ext4. To allow downstream projects to distinguesh between
those, add the `filesystem` information to created json files.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-12-13 22:07:52 -10:00
Karel Kočí
a3e5b24d43 scripts/feeds: fix preference of package install
The previous behavior prefered same feed for dependent packages as
initial package. This caused inconsitency in installation of packages.
The difference was if two feeds provide same package (different version)
there was different result if you executed install for that specific
version compared to install for package depending on it from different
feed.

This ensures that preferred feed is propagated without change and
selected feed is used only really for package it was selected for.

Signed-off-by: Karel Kočí <karel.koci@nic.cz>
2020-12-09 23:25:05 -10:00
Brian Norris
7f285d0b43 scripts/feeds: warn when skipping core package override
Otherwise, a n00b like myself can get quite confused when moving a
package from core to feeds, for example.

(Hint: one *really* needs to clear out the tmp/info/.packageinfo...
entries for the stale package, but '-f' works as well.)

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2020-12-09 11:30:07 -10:00
Piotr Stefaniak
1db9b5b6d6 build: mkhash on FreeBSD
Apply patch from
https://bugs.openwrt.org/index.php?do=details&task_id=971
in order to make it easier to build OpenWRT on FreeBSD.

Signed-off-by: Piotr Stefaniak <pstef@freebsd.org>
2020-11-27 18:01:22 -10:00
Petr Štetiar
52a5d0d27f download.pl: properly cleanup intermediate .hash file
It seems like after a build the /dl dir seems to now contain a .hash
file for each source file due to inproper cleanup so fix it by removing
those intermediate files before leaving the download action.

Fixes: 4e19cbc553 ("download: handle possibly invalid local tarballs")
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-27 22:27:08 +01:00
Petr Štetiar
4e19cbc553 download: handle possibly invalid local tarballs
Currently it's assumed, that already downloaded tarballs are always
fine, so no checksum checking is performed and the tarball is used even
if it might be corrupted.

From now on, we're going to always check the downloaded tarballs before
considering them valid.

Steps to reproduce:

 1. Remove cached tarball

   rm dl/libubox-2020-08-06-9e52171d.tar.xz

 2. Download valid tarball again

   make package/libubox/download

 3. Invalidate the tarball

   sed -i 's/PKG_MIRROR_HASH:=../PKG_MIRROR_HASH:=ff/' package/libs/libubox/Makefile

 4. Now compile with corrupt tarball source

   make package/libubox/{clean,compile}

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-27 14:46:13 +01:00
Hannu Nyman
2b1d92f134 scripts/feeds: silence git warning by selecting pull style
Silence the warning in git 2.27 about undefined fast-forward style
in git pull. Define "ff-only" as the style.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-11-26 19:29:18 -10:00
Paul Spooren
0c87304d2b scripts: add size_compare.sh
As package size changes are a continuous topic on the mailing list this
scripts helps developers to compare their local package modifications
against latest upstream.

The script downloads the latest package indexes based on env variables
or the `.config` file. The script compares the actual installed size
(data.tar.gz) or the IPK package size.

An example output is found below:

```
user@dawn:~/src/openwrt/openwrt$ ./scripts/size_compare.sh
Compare packages of ath79/tiny/mips_24kc:
dropbear busybox iw ubus

Checking configuration difference
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   554  100   554    0     0    336      0  0:00:01  0:00:01 --:--:--   336

 --- start config diff ---
--- /tmp/config.DDjwVh-LOCAL	2020-11-23 09:08:28.913203068 -1000
+++ /tmp/config.DDjwVh-UPSTREAM	2020-11-23 09:08:36.369240887 -1000
@@ -1,5 +1,9 @@
+CONFIG_ALL_KMODS=y
+CONFIG_ALL_NONSHARED=y
 CONFIG_AUTOREBUILD=y
+CONFIG_AUTOREMOVE=y
--- 8< ---
 CONFIG_BINARY_FOLDER=""
+CONFIG_BUILDBOT=y
+CONFIG_TARGET_ALL_PROFILES=y
 CONFIG_TARGET_ROOTFS_DIR=""
 CONFIG_USE_SSTRIP=y
 CONFIG_USE_UCLIBCXX=y
 --- end config diff ---

Checking installed size

Fetching latest package indexes...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 80634  100 80634    0     0  33499      0  0:00:02  0:00:02 --:--:-- 33485
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 54082  100 54082    0     0  24252      0  0:00:02  0:00:02 --:--:-- 24252

Comparing package sizes...
Change 	Local	Remote 	Package
+271	51386	51115	base-files
+123	705241	705118	bnx2-firmware
+86	17209	17123	fstools
+22	47989	47967	procd
+21	208311	208290	busybox
+19	67181	67162	netifd

```

I plan to integrate this script into the CI so we have a summary how
sizes change over different architectures.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-24 18:18:48 -10:00
David Bauer
d369993898 scripts: download.pl: retry download using filename
With this commit, the download script will try downloading source files
using the filename instead of the url-filename in case the previous
download attempt using the url-filename failed.

This is required, as the OpenWrt sources mirrors serve files using the
filename files might be renamed to after downloading. If the original
mirror for a file where url-filename and filename do not match goes
down, the download failed prior to this patch.

Further improvement can be done by performing this only for the
OpenWrt sources mirrors.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-11-20 02:35:43 +01:00
Adrian Schmutzler
7e7470b517 scripts: add const_structs.checkpatch for checkpatch.pl
Kernel has separated the structs that are reported to be const in
checkpatch.pl into a file of its own, const_structs.checkpatch.

This file has been missing after the recent update of checkpatch.pl,
leading to the following message:

  No structs that should be const will be found - file
  '/data/openwrt/scripts/const_structs.checkpatch': No such file
  or directory

This commit adds the relevant file from v5.10-rc4.

Fixes: 086ee09bbc ("scripts: Update checkpatch.pl to 2020-06-11")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-18 21:50:58 +01:00
Adrian Schmutzler
6fdd4187e0 scripts: checkpatch.pl: suppress warnings about MAINTAINERS
The kernel expects changes to MAINTAINERS for all removed or added
files, printing warnings like:

  WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
  #828:
  deleted file mode 100644

Since this does not apply to "our" files in OpenWrt repo, this
warning should be disabled.

This can be achieved easiest by setting $reported_maintainer_file
to 1. While this is a hack that tricks the script into believing
the proper MAINTAINERS changes have been made, it's the easiest
solution as it does not require to touch any other code.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-18 21:50:53 +01:00
Felix Fietkau
184d735707 scripts/kconfig.pl: allow regex syntax in filtering out config entries
This will be used to filter out some autogenerated config values from
the kernel config files

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-13 13:17:53 +01:00
Paul Spooren
3c0357e7b4 scripts: add spelling.txt for checkpatch.pl
Running the updated checkpatch version with spelling.txt show that
spelling mistakes happen to everyone.

> /target/linux$ fd .*.patch | xargs ../../scripts/checkpatch.pl | rg spell
WARNING: 'usefull' may be misspelled - perhaps 'useful'?
WARNING: 'afecting' may be misspelled - perhaps 'affecting'?
WARNING: 'usefull' may be misspelled - perhaps 'useful'?
WARNING: 'afecting' may be misspelled - perhaps 'affecting'?
WARNING: 'begining' may be misspelled - perhaps 'beginning'?
WARNING: 'superflous' may be misspelled - perhaps 'superfluous'?
WARNING: 'multipe' may be misspelled - perhaps 'multiple'?
WARNING: 'recieves' may be misspelled - perhaps 'receives'?
WARNING: 'retreive' may be misspelled - perhaps 'retrieve'?
WARNING: 'tranfer' may be misspelled - perhaps 'transfer'?
WARNING: 'additonal' may be misspelled - perhaps 'additional'?
WARNING: 'accomodate' may be misspelled - perhaps 'accommodate'?
[...]

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-12 18:21:55 +01:00
Paul Spooren
66e87a1f38 scripts: checkpatch remove device-tree doc check
Remove checks for device tree documentation as the OpenWrt tree comes
withouth the ./Documentation folder.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-12 18:21:55 +01:00
Paul Spooren
086ee09bbc scripts: Update checkpatch.pl to 2020-06-11
Checkpatch grown in functionallity and we should make use of that. If
OpenWrt patches should be upstream material they should also be checked
based on upstream checkpatch.pl instead of 2013.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-12 18:21:55 +01:00
Paul Spooren
165f0b00cd build: store SOURCE_DATE_EPOCH in JSON info files
The source date epoch is the only reproducible date close to the actual
build date. It can be used for tooling like the firmware wizard to show
the image age.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-12 18:19:44 +01:00
Paul Spooren
fcd3e13779 scripts: mkhash fail on hashing a folder
mkhash currently returns the hash of an empty input when trying to hash
a folder. This can be missleading in caseswhere e.g. an env variable is
undefined which should contain a filename. `mkhash ./path/to/$FILE`
would exit with code 0 and return a legit looking checksum.

A better behaviour would be to fail with exit code 1, which imitates the
behaviour of `md5sum` and `sha256sum`.

To avoid hashing of folders the `stat()` is checked.

Hashing empty inputs result in the following checksums:
md5: d41d8cd98f00b204e9800998ecf8427e
sha256: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-09 10:54:29 +00:00
Paul Spooren
fac98f1c54 scripts: mkhash fix return code handling
If hashing a file fails mkhash shouldn't just silently fail. Now check
after each call of `hash_file()` the return and exit early in case of
errors. The return value which was previously ignored and would always
return 0.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-09 10:54:29 +00:00
Paul Spooren
91a0dc5161 scripts: mkhash show -n option in usage
The -n option prints the filename of hashed files next to the calculated
checksum. Reflect that in the usage message.

user@dawn:~/src/openwrt/openwrt$ ./a.out md5 -n .config
eb06db36e7b6751cb18801945e46bf5d .config

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-09 10:52:19 +00:00
Petr Štetiar
4b7165722c scripts: bundle-libraries.sh: fix broken SDK compiler
Recent versions (> 5.33) of `file` report liblto_plugin.so as
executable:

 $ file liblto_plugin.so
 liblto_plugin.so.0.0.0: ELF 64-bit LSB pie executable ...

Which then leads to improper packaging of the plugin, resulting in the
broken compiler:

 configure: checking whether the C compiler works
 mips-openwrt-linux-musl/bin/ld: liblto_plugin.so: error loading plugin: liblto_plugin.so: invalid ELF header

As the LTO compiler plugin library is incorrectly packaged as SDK
executable:

 $ head -1 ~/staging_dir/toolchain...libexec/gcc/.../liblto_plugin.so
 #!/usr/bin/env bash

Fix this by filtering out shared libraries from the patching.

Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1296868
Acked-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-02 08:39:49 +01:00
Petr Štetiar
f52aee0455 scripts/getver.sh: silence rev-list errors
Shallow copies are quite common on CI platforms nowadays, making REBOOT
tag unavailable, thus producing following confusing errors in the build
logs:

 fatal: Invalid revision range ee53a240ac902dc83209008a2671e7fdcf55957a..HEAD
 fatal: Invalid revision range ee53a240ac902dc83209008a2671e7fdcf55957a..0493d57e04774d47921a7d2014b567455d5dc16b

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-02 08:39:49 +01:00
Tony Ambardar
5b3ff53ebd scripts/qemustart: update malta to use MIPS64 R2 cpu
Explicitly set the QEMU cpu type and support the MIPS R2 ISA, for both
64-bit and 32-bit targets. The later previously supported MIPS R2 by
implicit default.

This is needed after commit 93608697f3 ("malta: update MIPS64 ISA to R2"),
otherwise booting malta images with scripts/qemustart will hang.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2020-10-11 16:16:24 +02:00
Christian Lamparter
f6fbc39706 build: define PWM_SUPPORT arch feature flag
As the PWM has its own sub-system in the Linux kernel,
I think it should be handled in the same way as GPIO, RTC, PCI...

This patch introduces a specific feature flag "pwm" and the
"leds-pwm" kernel module as the first customer.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-09-25 19:32:33 +02:00
Christian Lamparter
fed1788689 scripts: mkits.sh make it possible to specify fdt@#
Some bootloaders are really keen on just one special
fdt in a multi-image fit image. This is a problem, because
currently this is fixed to "fdt@1".

This patch introduces a new device variable:
DEVICE_FDT_NUM that allows to specify the right
fdt number.

If the value is absent "1" will be chosen.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-09-25 19:32:33 +02:00
Paul Spooren
8be2eb3b9b scripts: update SPDX license names
SPDX moved from GPL-2.0 to GPL-2.0-only and from GPL-2.0+ to
GPL-2.0-or-later. Reflect that in the SPDX license headers.

Signed-off-by: Paul Spooren <mail@aparcar.org>
[adjust commit title, update remaining files]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-22 20:36:04 +02:00
Jo-Philipp Wich
4038c031cb scripts: ipkg-build: simplify uid/gid resolving
Use the prepared .packageusergroup file to lookup user and group names
when processing the passed file mode.

Also replace the various subshell/cut invocations with a sequence of
standard variable interpolations which fixes paths with embedded colons
as a side-effect.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2020-09-14 17:11:04 +02:00
Paul Spooren
51ec51871f build: add user/group ID resolve function
With the introduction of `./tmp/userids` the `ipkg-build` script can now
resolve values of "PKG_FILE_MODES", allowing users to set names rather
than numeric values.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-09-14 10:54:52 +01:00
David Bauer
fe82ea049e scripts: download.pl: fix indentation
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-09-11 17:35:19 +02:00
Jo-Philipp Wich
10dbdeccfa scripts: bundle-libraries.sh: retain preloaded libraries
Since the introduction of fakeroot support, wrapped SDK executables might
be invoked from a shell that has libfakeroot.so preloaded.

Since we're using preloading as well in order to mangle argv[0] when
invoking the shipped ELF interpreter directly, we must take care of
preloading the already preloaded libraries as well, to avoid invoked
programs losing their fakeroot capabilities.

Extend the bundle-libraries.sh script to take any existing $LD_PRELOAD
into account when invoking the target ELF executable with a preloaded
runas.so library.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2020-09-10 14:24:50 +02:00
Paul Spooren
fd29f2bcd9 build: store granular timestamps in packages
With the new `SOURCE` argument of `get_source_date_epoch` it is possible
to set package timestamps based on actual package changes rather thane
$TOPDIR changes.

This commit adds a new variable PKG_SOURCE_DATE_EPOCH which is used by
the `ipkg` build script. As a fallback the existing SOURCE_DATE_EPOCH is
used or as last resort the current time.

The redundant checks for `.git/` and `.svn/` are removed.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-08-31 11:18:06 +01:00
Paul Spooren
a83b2af47f build: get_source_date_epoch allow external repos
The SOURCE_DATE_EPOCH variable is used to make builds reproducible even
if rebuild at different times. Instead of using the current timestamp,
the time of the last source change is used.

Created packages are `touch`ed with a specific timestamp so resulting
packages have the same checksums.

The `get_source_date_epoch.sh` script tries multiple ways (file, git,
hg) to determine the correct timestamp.

Until now the script would only consider the $TOPDIR instead of package
specific changes. Resulting in packages with same versions but different
timestamps, as $TOPDIR (openwrt.git) received changes not affecting
package versions. This results in warning/erros in `opkg` as the package
versions stay the same but checksums changed.

This commit adds an optional argument to get the `SOURCE_DATE_EPOCH` of
a specific path (e.g. package SOURCE) rather than the $TOPDIR. As a
consequence this allows granular but still reproducible timestamps.

As packages might be distributed over multiple repositories the check
for `.git/` becomes unfeasible. Instead tell `git` and `hg` to change
their working directories and automatically traverse the repo folder.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-08-31 11:18:06 +01:00
Paul Spooren
ae87e53e33 build: Fix Shellcheck for get_source_date_epoch.sh
If a `cd` to `TOPDIR` fails the script should quit.

Also unify `try_mtime` function by storing it in a variable.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-08-31 11:18:06 +01:00
Paul Spooren
353ce2e521 build: ipkg-build use fakeroot with PKG_FILE_MODES
The `ipkg-build` script converts a folder into a `opkg` installable
package. Until now it would use root:root for all packages and try to
preserve file modes.

This has the two drawbacks of packages want to add non-root files or add
SUID files, like the `sudo` package does.

To give more flexibility regarding file modes and avoid init script
hacks, a new variable called `PKG_FILE_MODES`. The variable contains a
list of files modes in the format `path:owner:group:mode`.

An example for the `sudo` package below:

```
PKG_FILE_MODES:=\
        /usr/bin/sudo:root:root:4755 \
        /etc/sudoers:root:root:0440
```

The `ipkg-build` now runs within a fakeroot environment to set any mode
and directly store it in the resulting `ipk` package archive.

Both options `-o` and `-g` are no longer required due to the introduction
of the more flexible `-m` options, which takes the `PKG_FILE_MODES` as
input.

Lastly the option `-c` is removed as it's unused within the script.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-08-31 11:13:12 +01:00
Jo-Philipp Wich
bf96eb55c8 Revert "scripts/download: add sources CDN as first mirror"
This reverts commit c737a9ee6a.

The source CDN has been discontinued in its current form and will take a
while to be reestablished. Even then it makes little sense to put a CDN
before other CDNs such as kernel.org, apache.org, sourceforge etc.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2020-08-24 15:55:14 +02:00
Paul Spooren
1fdf6b745c treewide: replace which with command -v
Fix shellcheck SC2230
> which is non-standard. Use builtin 'command -v' instead.

Using `command -v` is POSIX compliant while `which` is not.  Also to
mention, `command -v` is a shell builtin whereas `which` is a separate
busybox applet.

Once applied to everything concerning OpenWrt we can disable the busybox
feature `which` and save 3.8kB.

Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Paul Spooren <mail@aparcar.org>
[also replace cases in zram-swap]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-12 11:08:05 +02:00
Petr Štetiar
80d360202f scripts: remove checkpatch.sh
That file was added accidentally in v3 of the patch and I haven't
properly reviewed that patch before pushing it.

Fixes: 656b562aff ("scripts: Add Buildbot dump-target-info.pl script")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-08-04 14:25:44 +02:00
Paul Spooren
656b562aff scripts: Add Buildbot dump-target-info.pl script
The script comes from buildbot.git[0] and is used to print available
targets and architectures, which are then build.

As the buildbot clones openwrt.git anyway, the script might as well live
here to be used for other cases as well, e.g. determining what
architectures are available when building Docker containers or show
developers an overview which architectures are used by which target.

It's called with either the parameter `architectures` or `targets`,
showing architectures followed by supported targets or targets, followed
by the supported architectures:

$ ./scripts/dump-target-info.pl architectures
aarch64_cortex-a53 bcm27xx/bcm2710 mediatek/mt7622 mvebu/cortexa53 sunxi/cortexa53
aarch64_cortex-a72 bcm27xx/bcm2711 mvebu/cortexa72
...

$ ./scripts/dump-target-info.pl targets
apm821xx/nand powerpc_464fp
apm821xx/sata powerpc_464fp
...

In the future the the script could be removed from the buildbot
repository and maintained only here.

Rename `dumpinfo.pl` to `dump-target-info.pl` to improve verbosity of
filename.

[0]: https://git.openwrt.org/?p=buildbot.git;a=blob;f=scripts/dumpinfo.pl;h=aa97f8d60379076a41b968402e9337cea824ece5;hb=HEAD

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-08-04 09:28:39 +02:00
Adrian Schmutzler
b99623329c scripts/checkpatch.pl: fix README.md file name after rename
checkpatch.pl uses a list of files to detect the root OpenWrt
directory. This includes README, which has been renamed to
README.md in the previous commit.

Update the file name in checkpatch.pl to prevent errors like the
following when running the script:

   Must be run from the top-level dir. of a OpenWrt tree

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-02 15:51:39 +02:00
Adrian Schmutzler
1d5260cf72 build: add option to mark devices as BROKEN
By specifying "BROKEN := 1" or "BROKEN := y" for a device, it will be
hidden (and deselected) by default. By that, it provides a stronger
option to "disable" a device beyond just using DEFAULT := n.

To make these devices visible, just enable the BROKEN option in
developer settings as already implemented for targets and packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-30 21:49:07 +02:00
Paul Spooren
5b8b42c78b build,json: fix compatibility with Python 3.5
The f-string feature was introduced in Python 3.6. As Buildbots may run
on Debian 9, which comes per default with Python 3.5, this would cause
an issue. Instead of f-strings use the *legacy* `.format()` function.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-07-13 22:45:04 +02:00
Kevin Darbyshire-Bryant
8242c6de29 scripts/env: Fix 56f813674a scripts/env: use command -v instead of which
We don't need to see how git will be executed and it produces non silent
output on 'scripts/env diff' commands when there are no differences
unlike before.

Re-introduce original silent behaviour.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-07-12 13:29:28 +01:00
Adrian Schmutzler
52cdd6185e scripts/mkits.sh: fix use of printf
Due to a line break, printf was accidentally called with three
arguments instead of two, causing a different output than before.

Fix it by splitting the printf command into two lines.

Fixes: 907053193a ("scripts/mkits.sh: replace echo -e with printf")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-11 18:46:53 +02:00
Petr Štetiar
dec9ae6d9e scripts/mkits.sh: fix remaining shellcheck warning
Fixes following shellcheck warning:

 In scripts/mkits.sh line 19:
 		 "-k kernel [-D name -d dtb] -o its_file" "$(basename $0)"
                                                                       ^-- SC2086: Double quote to prevent globbing and word splitting.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-07-11 14:42:32 +02:00
Rosen Penev
3d418dd51e scripts/mkits.sh: switch from bash to sh
This no longer needs bash.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-07-11 14:42:32 +02:00
Rosen Penev
7aefc85cab scripts/mkits.sh: fix improper string and array concatenation
Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-07-11 14:42:32 +02:00
Rosen Penev
765858f7ad scripts/mkits.sh: add missing quotes
Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-07-11 14:42:32 +02:00
Rosen Penev
907053193a scripts/mkits.sh: replace echo -e with printf
echo flags are not POSIX. printf does the same with added \n.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-07-11 14:42:32 +02:00
Petr Štetiar
92d7cedcad scripts/gen_image_generic.sh: fix more shellcheck warnings
Fixes following shellcheck warnings:

 In scripts/gen_image_generic.sh line 20:
 cyl=$(( (KERNELSIZE + ROOTFSSIZE) * 1024 * 1024 / (head * sect * 512)))
 ^-^ SC2034: cyl appears unused. Verify use (or export if used externally).
 --
 In scripts/gen_image_generic.sh line 34:
     [ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$(($ROOTFSOFFSET + $ROOTFSSIZE))" conv=notrunc count="$sect"
                                                                       ^-----------^ SC2004: $/${} is unnecessary on arithmetic variables.
 --
 In scripts/gen_image_generic.sh line 35:
     mkfs.fat -n kernel -C "$OUTPUT.kernel" -S 512 "$(($KERNELSIZE / 1024))"
                                                       ^---------^ SC2004: $/${} is unnecessary on arithmetic variables.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-07-11 14:42:32 +02:00
Rosen Penev
aee169b06d scripts/gen_image_generic.sh: use /bin/sh
This has nothing bash specific.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-07-11 13:33:28 +02:00
Rosen Penev
3819337cdf scripts/gen_image_generic.sh: replace -o with if/&&
-o is not well defined.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-07-11 13:33:28 +02:00
Petr Štetiar
227e47b3ca scripts/env: fix remaining shellcheck warning
Fixes following shellcheck warning:

 In scripts/env line 25:
 	exit ${1:-1}
             ^-----^ SC2086: Double quote to prevent globbing and word splitting.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-07-11 13:33:28 +02:00
Rosen Penev
5b7cace9e3 scripts/env: use read -r instead of read
read mangles backslashes.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-07-11 13:33:28 +02:00
Rosen Penev
f80a540dbf scripts/env: exit in case of failure to cd
Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-07-11 13:33:28 +02:00
Rosen Penev
e68810ba53 scripts/env: replace \! with !
The latter is more standard. The former throws an error under
shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-07-11 13:33:28 +02:00
Rosen Penev
56f813674a scripts/env: use command -v instead of which
Simpler and built in to the shell.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-07-11 13:33:28 +02:00
Huangbin Zhan
3caad5150c build: fix compatibility with python 3.6
On a system python3 is linked to python3.6, fail to perform json_overview_image_info
 and got `TypeError: __init__() got an unexpected keyword argument 'capture_output'`.
This patch emulate the behaviour on python 3.7+.

Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
2020-07-07 19:47:24 +02:00
Sergio E. Nemirowski
ab26022cc1 build: mconf readme update
This updates mconf.c readme message to maintain less changes with
upstream and consistency with nconf.c

Signed-off-by: Sergio E. Nemirowski <sergio@outerface.net>
2020-07-07 19:47:24 +02:00
Sergio E. Nemirowski
8fb0b15efd build: add nconfig
Add support for make target nconfig (ncurses)

Reviewed-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Sergio E. Nemirowski <sergio@outerface.net>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-07-07 19:47:24 +02:00
Daniel Golle
3b0f698760 build,json: fix build failure in case no data is found
Only collect arch_packages if actually generating any output.

Fixes: commit f09b9319 ("build,json: store arch_packages in profiles.json"(
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-07-03 22:09:24 +01:00
Paul Spooren
f09b9319c6 build,json: store arch_packages in profiles.json
The `arch_packages` contains the supported package architecture.

Previously it was necessary to parse the `Packages` index for the line
`Architecture:`, requiring both an additional parser and file download.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-07-03 15:28:05 +01:00
Paul Spooren
263f7e5bbd build: store default/device packages in JSON
With this commit the `profiles.json` contain both the target specific
`default_packages` as well as the device specific `device_packages` as a
array of strings.

This information is required for downstream projects like the various
web-based interactive firmware generators.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-06-30 23:21:10 +01:00
Álvaro Fernández Rojas
3f8e163e01 scripts: config: remove accidentally added file
Also ignore the file.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-02 18:17:31 +02:00
Álvaro Fernández Rojas
35d7f92c60 scripts: support Sercomm load tags
Header consists in Sercomm PID bytes, followed by a SHA256 hash of the
input binary.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-02 13:06:42 +02:00
Álvaro Fernández Rojas
7f1250a7fe scripts: support Sercomm crypto
Sercomm firmwares are encrypted with AES 256 CBC.
The key is generated with a custom algorithm from the firmware tag:
	char key[32];
	char version[32];
	char iv[32];
	char random[32];
	char size[32];
Key must be generated with Sercomm's algorithm. However, the rest of the
header can be empty. IV and random are set to 0 on purpose.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-02 08:37:54 +02:00
Álvaro Fernández Rojas
58bdbe7321 scripts: support Sercomm partition tags
Sercomm uses a custom layout for partition tags:
	char part_name[32];
	char size[32];
	char part_version[32];
	char reserved[32];
	char rootfs_version[32];

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-02 08:33:11 +02:00
Rosen Penev
69f8983af4 scripts/flashing/flash.sh: remove trailing whitespaces
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[cut out of patch with different subject]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-24 14:44:00 +02:00
Rosen Penev
34a2780395 scripts/flashing/flash.sh: Add missing quotes
These are in if statements (where they should be), and echo output that is
not piped to anything. These should be safe.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-05-24 14:44:00 +02:00
Álvaro Fernández Rojas
d90828411a scripts: add CFE Partition Tags support
Some BCM63xx NAND devices require a specific JFFS2 partition tag to verify
the JFFS2 partition validity:
	u32 part_id;
	u32 part_size;
	u16 flags;
	char part_name[33];
	char part_version[21];
	u32 part_crc32;

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-21 19:11:24 +02:00
Eneas U de Queiroz
80b350f528 build: have config-clean deal with old temp files
This is a temporary commit to have 'make config-clean' remove
temporary files from the previous scripts/config version.

The .gitignore file is updated to deal with the old files as well.

Cc: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-05-20 17:03:45 +02:00
Eneas U de Queiroz
9f843b1d43 build: scripts/config - update to kconfig-v5.6
Major changes include:
 - Much more readable reverse dependencies separated in groups
 - Improved recursive dependency report
 - More readable .config files: add comments to signal end of menus
 - More warnings for incorrect Config.in entries, such as a 'choice'
   default not contained in the 'choice'
 - Hability to properly display pseudographics with non-latin locales
 - Recursive dependencies can optionally be treated as errors

Changes from failed dcf3e63a35 attempt:
 - Recursive dependencies are treated as warnings by default
 - The option to treat them as errors is implemented as a command-line
   flag to scripts/config/conf instead of a compile-time definition
 - fixed handling of select with umnet dependencies

Cc: Petr Štetiar <ynezz@true.cz>
Cc: Jo-Philip Wich <jow@mein.io>
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-05-20 17:03:45 +02:00
Álvaro Fernández Rojas
258cb7f169 scripts: cfe-wfi-tag: fix shebang
Fixes: 72985233a6 ("scripts: support CFE WFI images")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-19 08:06:29 +02:00
Álvaro Fernández Rojas
30fcb62840 scripts: cfe-bin-header: fix shebang
Fixes: e575a7f777 ("scripts: support tags for CFE binaries")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-19 08:05:22 +02:00
Álvaro Fernández Rojas
72985233a6 scripts: support CFE WFI images
CFE WFI (Whole Flash Image) consists in 20 byte footer:
- u32: CRC32
- u32: WFI Version
- u32: Chip ID
- u32: Flash Type
- u32: Flags

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-18 18:24:06 +02:00
Álvaro Fernández Rojas
e575a7f777 scripts: support tags for CFE binaries
CFE loads binaries based on a 12 byte header which corresponds to:
- u32: Load Address
- u32: Entry Address
- u32: Size

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-18 18:24:06 +02:00
Paul Spooren
c737a9ee6a scripts/download: add sources CDN as first mirror
OpenWrt now has a CDN for sources at sources.cdn.openwrt.org which
mirrors sources.openwrt.org.

Downloading sources outside Europe or US (mainland) could
result in low throughput, extremely slowing down the first compilation of
the build system.

This patch adds sources.cdn.openwrt.org as the first mirror to offer
worldwide fast download speeds by default. If the CDN goes down for
whatever reason, the script jumps to the next available mirror and
downloads requested files as before (in regional varying speed).

Signed-off-by: Paul Spooren <mail@aparcar.org>
Acked-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-04-14 23:16:55 +01:00
Paul Spooren
14cbd8fb2d scripts: JSON merge don't crash if no JSON found
The JSON `WORK_DIR` ($(KDIR)/json_info_files) is only created if the new
image generation methods from `image.mk` are used. However some targets
like `armvirt` do not use it yet, so the folder is never created.

The `json_overview_image_info.py` script used to raise an error if the
given `WORK_DIR` isn't a folder, however it should just notify about
missing JSON files.

This patch removes the Python assert and exists with code 0 even if no
JSON files were found, as this is not necessarily an error but simply
not yet implemented. Using `glob` on an not existing `Path` results in
an empty list, therefore the for loop won't run.

Signed-off-by: Paul Spooren <mail@aparcar.org>
CC: Petr Štetiar <ynezz@true.cz>
2020-04-14 23:16:55 +01:00
Jo-Philipp Wich
7b1d809a8d Revert "build: scripts/config - update to kconfig-v5.6"
This reverts commit dcf3e63a35.

The kconfig update requires further testing and refinement until it can
remain in tree. Main problems are:

 - Recursive deps are now fatal instead of a warning
 - Previously legal syntax now leads to hard failures
 - It fails all package builds since multiple days

The updated kconfig implementation needs to cope with the current status
quo in the various package feeds before we can reconsider it for master.

It is not desirable that single broken packages can hard-fail the entire
build pipeline.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2020-04-12 00:10:47 +02:00
Jo-Philipp Wich
6c16d64b2a Revert "build: add option to warn on recursive dependency"
This reverts commit 3204430e38.

Reverting this commit in preparation for reverting
dcf3e63a35 ("build: scripts/config - update to kconfig-v5.6") which
introduces various unaddressed build breakages.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2020-04-12 00:10:30 +02:00
Jo-Philipp Wich
fbc01f2a4c Revert "build: config: allow bool to select a module pkg"
This reverts commit 8514b6b42c.

Reverting this commit in preparation for reverting
dcf3e63a35 ("build: scripts/config - update to kconfig-v5.6") which
introduces various unaddressed build breakages.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2020-04-12 00:10:16 +02:00
Eneas U de Queiroz
8514b6b42c build: config: allow bool to select a module pkg
kconfig-v5.6 disallowed a bool symbol to select another symbol that
'depends on m' (i.e. can be only 'm' on 'n').  It is, in fact, an unmet
dependency to have set to 'y'.  However, openwrt depends on the previous
behavior, to be able to build a package that can be a module or built-in
depending on a bool config.  This restores the previous behavior.

Ref: https://forum.openwrt.org/t/wireless-fails-on-snapshot-r12900-kernel-5-4-on-c2600-ipq806x
Tested-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [added forum ref]
2020-04-11 19:06:26 +02:00
Eneas U de Queiroz
3204430e38 build: add option to warn on recursive dependency
This addes the option to treat recursive dependencies as warnings
instead of errors, by running make with WARN_RECURSIVE_DEP=1.

Note that the script/config targets will not get rebuilt when you add or
remove WARN_RECURSIVE_DEP while running make.  One must run
'make config-clean' before building config with a different setting.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-04-09 12:51:10 +02:00
Eneas U de Queiroz
dcf3e63a35 build: scripts/config - update to kconfig-v5.6
Major changes include:
 - Much more readable reverse dependencies separated in groups
 - Improved recursive dependency report
 - More readable .config files: add comments to signal end of menus
 - More warnings for incorrect Config.in entries, such as a 'choice'
   default not contained in the 'choice'
 - Hability to properly display pseudographics with non-latin locales
 - Recursive dependencies are now treated as errors - this should make
   it harder for them to creep in.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-04-09 12:51:10 +02:00
Eneas U de Queiroz
8636a17214 build: simplify building *config targets
Instead of passing pkg-config location through a variable when building
qconf (make xconfig), prepend its parent directory to the PATH, as it is
being done for other conf targets.

Use a Makefile pattern rule to group all 'scripts/config/%onf'
(currently conf, mconf, qconf) targets in a single rule.  Add -O2 to
CFLAGS when building them as well.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-04-09 12:51:10 +02:00
Paul Spooren
07449f692c build: refactor JSON info files to profiles.json
JSON info files contain machine readable information of built profiles
and resulting images. These files were added in commit 881ed09ee6
("build: create JSON files containing image info").

They are useful for firmware wizards and script checking for
reproducibility.

Currently all JSON files are stored next to the built images, resulting
in up to 168 individual files for the ath79/generic target.

This patch refactors the JSON creation to store individual per image
(not per profile) files in $(BUILD_DIR)/json_info_files and create an
single overview file called `profiles.json` in the target directory.

Storing per image files and not per profile solves the problem of
parallel file writes. If a profiles sysupgrade and factory image are
finished at the same time both processes would write to the same JSON
file, resulting in randomly broken outputs.

Some target like x86/64 do not use the image code yet, resulting in
missing JSON files. If no JSON info files were created, no
`profiles.json` files is created as it would be empty anyway.

As before, this creation is enabled by default only if `BUILDBOT` is set.

Tested via buildroot & ImageBuilder on ath79/generic, imx6 and x86/64.

Signed-off-by: Paul Spooren <mail@aparcar.org>
[json_info_files dir handling in Make, if case refactoring]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-03 12:17:45 +02:00
李国
a6b7c3e672 x86: generate EFI platform bootable images
Add EFI platform bootable images for x86 platforms. These images can
also boot from legacy BIOS platform.

EFI System Partition need to be fat12/fat16/fat32 (not need to load
filesystem drivers), so the first partition of EFI images are not ext4
filesystem any more.

GPT partition table has an alternate partition table, we did not
generate it. This may cause problems when use these images as qemu disk
(kernel can not find rootfs), we pad enough sectors will be ok.

Signed-off-by: 李国 <uxgood.org@gmail.com>
[part_magic_* refactoring, removed genisoimage checks]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-31 16:20:47 +02:00
Paul Spooren
2cb6d471b7 scripts: fixup qemustart for new x86 image names
qemustart allows easy testing of created images via `qemu`. The script
automatically selects created images and can setup e.g. networks.

As the x86 target now uses the generic image.mk the profile appears also
in the image name, this is *generic*.

Add the profile name to the qemustart script so it still finds the file.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-03-21 10:36:00 +00:00
Jeffery To
f96cfe019a build: Fix directory symlinks not removed when cleaning STAGING_DIR
Currently, a symbolic link whose target is a directory will not be
removed when cleaning packages from STAGING_DIR.

In the first cleaning pass in scripts/clean-package.sh, the -f test for
a directory symlink returns false (because the link target is a
directory) and so the symlink is not removed.

In the second pass, the -d test returns true for a directory symlink,
but the symlink is not removed by rmdir because rmdir only removes
(real) directories.

This updates clean-package.sh to remove all non-directories (including
symbolic links) in the first pass.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
2020-03-01 21:35:59 +01:00
Rosen Penev
e37e2f0cf1 scripts/arm-magic.sh: switch to /bin/sh
This does not use any special bash stuff.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-01-02 23:59:20 +01:00
Rosen Penev
995378a2a5 scripts/env: replace -a and -o with &&/||
The former are not well defined.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-01-02 23:56:19 +01:00
Rosen Penev
2fe5319d58 scripts/env: use explicit find location
Some find binaries do not imply the current directory.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-01-02 23:51:45 +01:00
Rosen Penev
33f87d2ef6 scripts/gen-dependencies.sh: use /bin/sh
This uses no special bash stuff.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-01-01 17:01:02 +01:00
Rosen Penev
dec46a9ea0 scripts/gen-dependencies.sh: replace backticks with $()
Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-01-01 17:00:38 +01:00
Rosen Penev
9a8ba44f9c scripts/mkits.sh: replace legacy backticks with $()
This replaces deprecated backticks by more versatile $(...) syntax.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[adjust commit title and message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-31 11:44:04 +01:00
Rosen Penev
543d945f07 scripts/symlink-tree.sh: use /bin/sh
This uses nothing bash specific.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-12-31 11:43:15 +01:00
Adrian Schmutzler
ec0fb23a41 scripts/strip-kmod.sh: harmonize leading whitespaces
Convert leading spaces to tabs for consistency in the file.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-31 11:41:07 +01:00
Rosen Penev
f4b812dac1 scripts/strip-kmod.sh: use sh instead of bash
There's nothing bash specific here.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-12-31 11:40:24 +01:00
Rosen Penev
eae889b8f2 scripts/strip-kmod.sh: replace legacy backticks with $()
This replaces deprecated backticks by more versatile $(...) syntax.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[slightly adjusted commit title, added commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-31 11:38:06 +01:00
Rosen Penev
3f65fe5d62 scripts/gen_image_generic.sh: replace deprecated backticks with $()
This replaces deprecated backticks by more versatile $(...) syntax.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[adjust commit title and message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-31 01:06:20 +01:00
Rosen Penev
2e14dd23c9 scripts/gen_image_generic.sh: remove $ in arithmetic
Fixes shellcheck warning:

SC2004: $/${} is unnecessary on arithmetic variables.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-12-31 01:05:27 +01:00
Jiri Kastner
dc34c695c4 scripts/dowload.pl: add archive.apache.org to apache mirror list
apache mirrors holds only latest releases, to download
older releases, one must use archive.apache.org to get
them.

Signed-off-by: Jiri Kastner <cz172638@gmail.com>
2019-12-23 00:21:46 +01:00
Yousong Zhou
d26738bc76 scripts/dl_github_archive.py: fix python3 str, bytes confusion
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-11-04 11:11:19 +00:00
Yousong Zhou
66ebca7103 build: label kernel and rootfs ext4 volumes
UUID of ext4 volumes generated by make_ext4fs are determined by volume
label and it will all be 57f8f4bc-abf4-655f-bf67-946fc0f9f25b when label
is empty

Labeling them does not make them unique but tools like block command
from fstools have a better chance differentiating them

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-11-03 04:25:40 +00:00
Alexander Couzens
5625a02e77
ubinize-image: set image sequence from SOURCE_DATE_EPOCH
Set the image sequence number to SOURCE_DATE_EPOCH.
If not set, ubinize will use rand() as image sequence.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2019-11-03 04:20:21 +01:00
Paul Spooren
2ae5100d70 build: add script to sign packages
This script allows image signing indipendend of the actual build
process, to run on a master server after receiving freshly backed
images. Idea is to avoid storying private keys on third party builders
while still beeing to be able to sign packages.

Run ./scripts/sign_images.sh with the following env vars:

* TOP_DIR where to search for sysupgrade.bin images
* BUILD_KEY place of key-build{,.pub,.ucert}
* REMOVE_OTHER_SIGNATURES removes signatures added by e.g. buildbots

Only sysupgrade.bin files are touched as factory.bin signatures wouldn't
be evaluated on stock from.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-10-21 14:07:08 +02:00
Paul Spooren
881ed09ee6 build: create JSON files containing image info
The JSON info files contain details about the created firmware images
per device and are stored next to the created images.

The JSON files are stored as "$(IMAGE_PREFIX).json" and contain some
device/image meta data as well as a list of created firmware images.

An example of openwrt-ramips-rt305x-aztech_hw550-3g.json

    {
      "id": "aztech_hw550-3g",
      "image_prefix": "openwrt-ramips-rt305x-aztech_hw550-3g",
      "images": [
        {
          "name": "openwrt-ramips-rt305x-aztech_hw550-3g-squashfs-sysupgrade.bin",
          "sha256": "db2b34b0ec4a83d9bf612cf66fab0dc3722b191cb9bedf111e5627a4298baf20",
          "type": "sysupgrade"
        }
      ],
      "metadata_version": 1,
      "supported_devices": [
        "aztech,hw550-3g",
        "hw550-3g"
      ],
      "target": "ramips/rt305x",
      "titles": [
        {
          "model": "HW550-3G",
          "vendor": "Aztech"
        },
        {
          "model": "ALL0239-3G",
          "vendor": "Allnet"
        }
      ],
      "version_commit": "r10920+123-0cc87b3bac",
      "version_number": "SNAPSHOT"
    }

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-09-29 13:51:28 +02:00
leo chung
b2c55d50f8 build: fix xconfig target
`make xconfig` fails with following linking error of qconf binary:

 g++ -lQt5Widgets -lQt5Gui -lQt5Core -o qconf qconf.o zconf.tab.o
 /usr/bin/ld: qconf.o: in function ConfigList::metaObject() const': qconf.cc:(.text+0x3eb): undefined reference to QObjectData::dynamicMetaObject() const'
 /usr/bin/ld: qconf.o: in function `ConfigList::qt_metacast(char const*)': link error.

which is caused by the wrong order of the linked objects/libraries so
this patch reorders the linker's arguments which makes the qconf compile
again.

Signed-off-by: leo chung <gewalalb@gmail.com>
[commit subject and message tweaks, whitespace fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-09-25 12:50:24 +02:00
Petr Štetiar
965f341aa9 build: fix host menu config targets using ncurses
On a recent Gentoo Linux installation, invoking `make menuconfig`, `make
kernel_menuconfig` or `make kernel_nconfig` in the build system fails,
whereas for example `make menuconfig` in the kernel tree alone works as
expected.

This is happening because STAGING_PREFIX is not defined when kernel's
{menu,n}config target calls pkg-config from the toolchain/host and thus
pkg-config returns an empty value, and the fallback values in the kernel
config script are applied but those are off and the linking fails.

Solution is to use system's pkg-config for all ncurses based menu config
targets in order to provide proper compiler/linker flags.

Ref: FS#2423
Cc: Thomas Albers <thomas.gameiro@gmail.com>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-09-25 12:50:24 +02:00
Johann Neuhauser
205e0939f0 build: make device tree arg really optional in mkits.sh
If no device tree is given there is no node generated, but
the configuration does still include the name of the missing node.
This will result in a successful build fit image, but bootm does
throw a error message if we want to boot the bad configuration.

Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
2019-09-19 23:43:27 +02:00
Yousong Zhou
18dc533172 download.dl: fix @KERNEL mirror urls
- Prepend "/pub" for mirror.rackspace.com
 - Use https for download.xs4all.nl and mirrors.mit.edu

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-09-16 08:11:59 +00:00
Felix Fietkau
d5cd80a1e8 scripts/feeds: fix accepting "-" in feed type string
Fixes a syntax error in processing the type src-git-full

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-15 19:54:03 +02:00
Jonas Gorski
ee76bd11bb images: fix boot failures on NAND with small sub pages
SquashFS has a minimum block size of at least 1k, so we need to make
sure the last data block is also at least that big.

This is not an issue on NOR or SD CARD devices, since their rootfs
partitions go all the way to the end of the usable space.

But on NAND with ubiblock, the rootfs partition will be the exact space,
rounded up to LEB size. Unfortunately, some NAND chips with small sub
pages have a LEB size of x.5 kiB. This can cause the the last data block
to be less than 1k, which will cause the last block to be inaccessible,
causing boot failures as seen on MR24:

[    1.532960] block ubiblock0_3: created from ubi0:3(rootfs)
[    1.538457] ubiblock: device ubiblock0_3 (rootfs) set to be root filesystem
[    1.552847] SQUASHFS error: squashfs_read_data failed to read block 0x621472
[    1.559896] squashfs: SQUASHFS error: unable to read id index table
[    1.566474] VFS: Cannot open root device "(null)" or unknown-block(254,0): error -5

Since on most NOR devices, the start of the squashfs partition is not
aligned. Since the start of the rootfs_data partition there is dependend
on the SquashFS size, we cannot just always pad it, as the padding could
creep into the rootfs_data partition, breaking jffs2.

So fix this by ensuring a squashfs rootfs is always a multiple of 1k
only for UBI and NAND sysupgrade images.

Fixes #2460 without affecting NOR devices.

Tested-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2019-09-14 11:43:19 +02:00
Bjørn Mork
a21b70be31 scripts/feeds: fix 'src-include' directive
Commit 775b70f8d5 renamed parse_file() parameters without
updating the recursive call. This broke parsing of any feeds.conf
using 'src-include'.

 $ scripts/feeds update -a
 Can't use string ("defaults") as a HASH ref while "strict refs" in use at scripts/feeds line 63, <$fh> line 1.

Fixes: 775b70f8d5 ("scripts/feeds: allow adding parameters to feeds")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2019-09-02 16:48:40 +02:00
Thomas Langer
035906fd05 Fix handling of BUILD_SUFFIX in remote-gdb script
When CONFIG_BUILD_SUFFIX is enabled, the target-* folders in build_dir
and staging_dir have this suffix in the name, but not the
toolchain directories. When detecting the names for "arch" and "libc",
also accept the suffix and do not use it for the toolchain path.

Signed-off-by: Thomas Langer <thomas.langer@intel.com>
2019-09-01 18:38:05 +02:00
Jo-Philipp Wich
775b70f8d5 scripts/feeds: allow adding parameters to feeds
this allows adding "--" prefixed parameters inside feeds.conf between the
target and name. The first parameter is --force which has the same effect
as using -f when installing any of the packages. This allows creating
feeds that will override base packages by default.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-28 16:10:41 +02:00
Yousong Zhou
164037983d scripts/dl_github_archive.py: fix python3 transition
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-08-20 13:34:58 +00:00
Yousong Zhou
0f3667864d download.pl: use https://source.openwrt.org
https://sources.lede-openwrt.org now redirects to there

https://downloads.openwrt.org/sources returns 404, so remove it here

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-08-18 15:19:22 +00:00
Jonas Gorski
7546be6007 build: allow overriding default selection state for devices
Allow overriding the default selection state for Devices, similar to
setting a default for packages.

E.g. by setting DEFAULT to n, they won't be selected by default anymore
when enabling all device in the multi device profile.

This allows preventing images being built by the default config for
known broken devices, devices without enough RAM/flash, or devices not
working with a certain kernel versions.

This does not prevent the devices from being manually selected or images
being built by the ImageBuilder. These devices often still have worth
with a reduced package-set, or as a device for regression testing, when
no better device is available.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2019-08-13 22:13:18 +02:00
Petr Štetiar
c6d41c320c scripts/ubinize-image.sh: fix buildbot breakage
New Docker based buildslaves install just bare minimum of packages, thus
not having bsdmainutils package installed which provides `hexdump`
utility, leading to the following build breakage on buildbots:

 ubinize-image.sh: 12: /builder/scripts/ubinize-image.sh: hexdump: not found

So this patch simply replaces `hexdump` with `od` utility provided by
coreutils package, which should be likely available.

Co-authored-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-30 10:16:16 +02:00
Petr Štetiar
57bb89b57f scripts/jungo-image: convert to Python 3 with 2-to-3
Let's convert the script to Python 3.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Petr Štetiar
e785da815b scripts/dl_github_archive.py: convert to Python 3 with 2-to-3
Let's convert the script to Python 3.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Alban Bedel
340df72e07 scripts: time.pl: Don't print the time on stderr
Having the build time written on stderr make it appear with V=w
although it is not an error or warning. Just write the time on stdout
to have it part of the build log like all the rest, but not clutter
the output when only warnings and errors should be shown.

Signed-off-by: Alban Bedel <albeu@free.fr>
2019-07-03 07:45:00 +02:00
Bjørn Mork
7a1b575ac4 scripts/feeds: add src-include method
The src-include method allows recursive inclusion of feeds.conf snippets.

This can for example be used for adding static local feeds to
feeds.conf.default without ever having to update the local feeds.conf:

 src-include defaults feeds.conf.default
 src-link custom /usr/local/src/lede/custom

Signed-off-by: Bjørn Mork <bjorn@mork.no>
2019-07-01 16:18:44 +02:00
Jo-Philipp Wich
27a4a71c24 metadata: handle ABI version rebuild tracking for transient dependencies
Extend the packageauxvars database to keep a list of possible package
dependencies for each provider, then utilize this information in buildroot
to resolve the ABI version dependencies of dependent packages up to five
levels deep.

This should properly trigger rebuilds for packages indirectly depending
on other packages whose ABI_VERSION changed.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-06-21 12:03:43 +02:00
Jonas Gorski
0096a1cf00 scripts/config: fix *c_shipped build depency tracking
The Makefile was missing dependencies on *c_shipped, so changes never
triggered a rebuild. Add these as optional dependencies so their absence
isn't treated as an error.

In addition, fix a typo preventing the zconf.lex.o from being removed on
clean.

Fixes: 9d5510a500 ("build: add new menuconfig code based on linux 3.9")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2019-06-20 17:11:07 +02:00
Jonas Gorski
1fd50531ca metadata: ensure one dependency provider to be y if a package is y
When there are multiple packages providing a meta-package, it is
possible to to create a config where a package is selected as =y, but
all of its dependency providers are just selected as =m. This is due to
the selection statement being just

  config PACKAGE_foo
    select PACKAGE_bar if !PACKAGE_baz

which is already fulfilled by PACKAGE_bar=m. Fix this by properly
comparing the selection states:

  config PACKAGE_foo
    select PACKAGE_bar if PACKAGE_baz<PACKAGE_foo

Also invert the select conditions to improve readability.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[slightly reword commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-06-20 14:18:25 +02:00
Nicolas Pitre
75dcaf3d23 config: fix relational operators for bool and tristate symbols
Since commit 31847b67bec0 ("kconfig: allow use of relations other than
(in)equality") it is possible to use relational operators in Kconfig
statements. However, those operators give unexpected results when
applied to bool/tristate values:

	(n < y) = y (correct)
	(m < y) = y (correct)
	(n < m) = n (wrong)

This happens because relational operators process bool and tristate
symbols as strings and m sorts before n. It makes little sense to do a
lexicographical compare on bool and tristate values though.

Documentation/kbuild/kconfig-language.txt states that expression can have
a value of 'n', 'm' or 'y' (or 0, 1, 2 respectively for calculations).
Let's make it so for relational comparisons with bool/tristate
expressions as well and document them. If at least one symbol is an
actual string then the lexicographical compare works just as before.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[rebased against OpenWrt kconfig, slightly reword commit message]
(backported from upstream 9059a3493efea6492451430c7e2fa0af799a2abb)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-06-20 14:14:16 +02:00
Jonas Gorski
972123f1e0 config: regenerate *_shipped sources
The pregenerated `zconf.hash.c` and `zconf.lex.c` files have not been
kept in sync with their respective `*.y` and `*.l` sources in the past
causing our kconfig implementation to not recognize important kconfig
grammer elements such as relational `<`, `<=`, `>` and `>=` operators.

Fixes: 2d7e602381 ("scripts/config: sync with latest linux upstream")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[reword commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-06-20 14:14:16 +02:00
Joseph Benden
88c07c6552 toolchain: Add GCC 9.1.0 release
Most of the patches are copied over from GCC 8.3.

The following patches are backported from the GCC 9.X development branch:
toolchain/gcc/patches/9.1.0/970-recompute-dom-fast-queries-before-vn.patch
toolchain/gcc/patches/9.1.0/975-g++-ICE-with-generic-lambda.patch

The specs file changed with gcc 9, now it contains "%@{L*}" instead of
"%{L*}" in older GCC versions.

Signed-off-by: Joseph Benden <joe@benden.us>
2019-06-16 16:40:08 +02:00
Eneas U de Queiroz
a41f474d17 build: add support to && in DEPENDS
Adds support to && operand in DEPENDS.  Also, fixes generation of ||
dependencies by scripts/package-metadata.pl.

The precedence order from higher to lower is && then ||.  Use of
parentheses to change the order is not supported. As before, they are
silently ignored.  Use them for readability only.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [DMARC removal]
2019-05-31 11:21:22 +02:00
Jeffery To
3fcb709275 build: fix STAGING_DIR cleaning when filenames contain spaces
When looping through a package's STAGING_FILES_LIST (a list of
file/directory paths delimited by newlines), if the path contains
spaces, then the path will be split by the while loops, and the
file/directory will not be deleted/removed.

This sets the internal field separator to the newline only so that the
entire path is considered when deleting/removing.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
2019-05-17 21:41:43 +02:00
Felix Fietkau
85017c40f4 build: add a config option for enabling a testing version of the target kernel
If the target supports a newer kernel version that is not used by default
yet, it can be enabled with this option

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-11 11:37:10 +02:00
Yousong Zhou
c2fee615ce scripts/qemustart: add notes on adding new options
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-04-26 13:09:33 +00:00
Yousong Zhou
d726878546 scripts/qemustart: fix network device emulation
We only enabled pcnet driver for malta machine, and x86/legacy target
was supposed to only support e1000 model

Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-04-26 13:09:33 +00:00
Yousong Zhou
647356a3d2 scripts/qemustart: no network by default and enable with -n
This should make it easier to set up and possibly provide a "work out of
the box" experience for most test usage.  Typical wan&lan networking
setup is only two characters argument away.

Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-26 13:08:38 +00:00
Hans Dedecker
9424b6f998 scripts/qemustart: fix usage with networking support
Commit 8bf500eb79 added support for qemu usage without networking
support but broke networking support as -n and -z do not work with
unquoted argument; fix this by quoting the arguments.

Fixes 8bf500eb79

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-04-24 20:02:54 +02:00
Kevin Darbyshire-Bryant
750a57b836 build: switch default target from ar71xx to ath79
ar71xx is in the process of being deprecated as a target accepting new
devices.  The replacement target for the same hardware is DTS
based ath79.

Switch the default build target selection from ar71xx to ath79.

This is intended to encourage DTS takeup & support for ath79 and longer
term will also aid kernel upstream support.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-04-11 17:14:01 +01:00
Petr Štetiar
4953b3891a scripts/qemustart: Allow specifying custom rootfs for malta
Currently it's not possible to test boot squashfs root images, so this
patch now allows this use case as well.

Cc: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-04-08 18:37:05 +02:00
Petr Štetiar
b0e5e32daa scripts/qemustart: Allow specifying custom kernel for x86
Currently it's not possible to test boot squashfs root images, so this
patch now allows this use case as well.

Cc: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-04-08 18:37:05 +02:00
Petr Štetiar
8bf500eb79 scripts/qemustart: Allow usage without networking
For basic tests it's not necessary to have the networking setup and this
allows testing as a normal user as well, without root privileges.

So this patch adds `--no-network` long option or `-n` short option,
which allows starting QEMU without network.

Cc: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-04-08 18:37:05 +02:00
Daniel Golle
7204736076 IB: fix generating .profile.mk for profiles without metadata
Fixes d6fa04a437 ("IB: include SUPPORTED_DEVICES in 'make info' output")

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-03-27 22:53:14 +01:00
Stijn Tintel
b422e1631e scripts/gen_image_generic.sh: fail on errors
The script always exits with value 0, even if some of the commands fail.
This can potentially create broken, unbootable images, e.g. when
make_ext4fs fails due to TARGET_KERNEL_PARTSIZE being too small for the
kernel. Avoid this by failing the script when any command fails.

Acked-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-03-27 00:13:30 +02:00
Daniel Golle
d6fa04a437 IB: include SUPPORTED_DEVICES in 'make info' output
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-03-11 05:32:29 +01:00
Daniel Golle
13c379e5c6 ib: display whether profile comes with image metadata
Having image metadata (and signature) appended is a condition for
semi-automated sysupgrade, hence IB needs to be able to tell which
images will end up with metadata.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-03-06 14:50:42 +01:00
David Bauer
e7bc8984d9 scripts: make eva_ramboot.py offset configurable
The current eva_ramboot.py script is currently only compatible with
Lantiq based AVM devices. For IPQ40xx devices, the offset needs to be
changed. Also an alignment is not necessary here.

Adjust the script to be able to pass an optional offset to load the
image to. In case no offset is provided, the script behaves exactly as
before this commit.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-02-28 11:32:55 +01:00
Piotr Dymacz
bf4630e5ad build: add helpers for generating QSDK sysupgrade compatible images
Qualcomm SDK (QSDK) sysupgrade compatible images for IPQ40xx, IPQ806x
and IPQ807x use FIT format together with 'dumpimage' tool from U-Boot
for verifying and extracting them. Based on 'images' sections names,
corresponding mtd partitions are flashed. For example, in case of
NOR-only boards, below mapping is used (section name -> mtd name):

  hlos*   -> 0:HLOS
  rootfs* -> rootfs

And for boards with NAND (kernel inside UBI):

  ubi* -> rootfs

Above mappings come from unmodified QSDK sources and might be wrong for
boards running custom or modified QSDK-based firmware. Some of vendors
adjust them to meet their modified mtd layout or features like recovery
or dual-image support.

This adds simple script 'mkits-qsdk-ipq-image.sh' (based on 'mkits.sh')
for generating FIT images tree source files, compatible with the QSDK
sysupgrade format. Resulting images can be used for initial (factory ->
OpenWrt) installation and would work both in CLI and GUI.

The script is universal in a way it allows to include as many sections
as needed. To make use of it, two generic/basic build recipes for NOR
and NAND based boards are also included in 'image-commands.mk':

  Build/qsdk-ipq-factory-nand
  Build/qsdk-ipq-factory-nor

Example usage for board with UBI in NAND:

  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-02-25 17:36:16 +01:00
Yousong Zhou
73c60ef239 scripts/qemustart: allow machine selection with new option --machine
This can be used to set machine options like highmem=off for running old
armvirt/32 kernel lacking LPAE support with QEMU version 3.0 or later

 [1] Armv7 guest fails to boot with qemu-3.0.0-1,
     https://bugzilla.redhat.com/show_bug.cgi?id=1633328#c5

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-02-22 01:35:05 +00:00
Jo-Philipp Wich
ece5cab743 scripts: ipkg-make-index.sh: dereference symbolic links
Use `stat -L` instead of `ls -l` to follow symbolic links when obtaining
the file size of .ipk archives.

Without this change, the size of the symlink, not the size of the target
file is encoded in the package index file.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-31 12:35:29 +01:00
Jeffery To
a117093679 build: fix STAGING_DIR cleaning for packages
This fixes two issues with cleaning package files from STAGING_DIR:

* CleanStaging currently can only remove files and not directories. This
  changes CleanStaging to use clean-package.sh, which does remove
  directories.

* Because of the way directories are ordered in the staging files list,
  clean-package.sh currently tries (and fails) to remove parent
  directories before removing subdirectories. This changes
  clean-package.sh to process the staging files list in reverse, so that
  subdirectories are removed first.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
2019-01-30 12:32:07 +01:00
Oever González
892d741259 build: add a script for generating Linksys factory images
This commit adds the 'Build/linksys-image' rule and the
'linksys-image.sh' script to the build system.

This change is needed for generating factory images for the Linksys
EA6350v3 device. Without this patch, only valid sysupgrade images can be
generated. With this patch, users can flash the device without the
need of physical access or disassembly.

Signed-off-by: Ryan Pannell <ryan@osukl.com>
Signed-off-by: Oever González <notengobattery@gmail.com>
2019-01-26 21:43:07 +01:00
Jo-Philipp Wich
60558790a2 build: extend ABI_VERSION suffixing to provides
When a library package specifies additional provides, e.g. libncurses
which provides libncursesw, we should also append the abi version
suffix to each provide, since there may be more than one package
providing the virtual library.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-24 10:39:29 +01:00
Jo-Philipp Wich
8c9b182db6 scripts: ipkg-remove: handle existing .ipk files without SourceName field
Package archives built before commit e6bcf1e4ac
("build: add ABI_VERSION to binary package names") lack the SourceName
control file field which caused ipkg-remove to skip such archives.

Add fallback code that matches the files by their basename followed by
an underscore, similar to how the old cleanup code worked.

Fixes: #2067
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-21 16:35:40 +01:00
Jo-Philipp Wich
e6bcf1e4ac build: add ABI_VERSION to binary package names
Add the ABI_VERSION source makefile variable to the binary package basename
and resolve source dependencies on packages with ABI_VERSION set to such
expanded names.

If for example a package specifies DEPENDS:=libopenssl while the OpenSSL
Makefile specifies ABI_VERSION:=1.0.0, the resulting ipk control data
dependency will be "Depends: libopenssl1.0.0" and the libopenssl ipk file
will be called "libopenssl1.0.0_<version>_<arch>.ipk".

The next time a library such as OpenSSL is updated to an incompatible
version, the ABI_VERSION shall be changed accordingly to prevent opkg from
simply upgrading to an incompatible library without considering the
dependencies of already installed packages.

Also introduce another "SourceName" control field which is required by
the newly introduced "scritps/ipkg-remove" to determine the proper related
.ipk files to delete upon buildroot package clean operations.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-19 14:32:12 +01:00
Jo-Philipp Wich
e3d5b384aa build: expose ABI version in .packageauxvars
Subdequent commits need this information to resolve the ABI version when
computing binary ipk dependencies.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-19 14:32:01 +01:00
Jo-Philipp Wich
2d9d57b9de build: rename .packagesubdirs to .packageauxvars
Subsequent commits will put more auxiliary information into this file,
such as the per-package ABI version, so rename the metadata script
subcommand and file names accordingly.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-19 14:31:56 +01:00
Sven Eckelmann
1afe3d8443 build: Drop user/group ID/name from sysupgrade.tar
Tar will automatically record the user/group ID and name for
files/directories. This reduces the reproducibility of the sysupgrade.tar
because most of the people don't use the same username as the OpenWrt
buildserver.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2019-01-02 22:36:17 +01:00
Sven Eckelmann
894bcf59dc build: Use stable file ordering in sysupgrade.tar
The file ordering in the current sysupgrade depends on the order of file in
a filesystem. This is often already in a sane (alphabetical order) but this
is not always the case. For example, the OpenWrt build servers return a
different ordering.

This breaks the reproducibility of the sysupgrade tarballs significantly
and also resulted in images which cannot be used for upgrades on devices
like the OpenMesh A42/A62.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2019-01-02 22:36:16 +01:00
Yorkie Liu
8b2efc87db scripts: rstrip.sh: allow rpath with sole $ORIGIN token
2efe776 introduces rpath checks with the commit message:

> Remove all rpath entries which do not point to a location below /lib or
> /usr/lib and which do not begin with '$ORIGIN'.

However the implementation failed to support rpath entries with only the
'$ORIGIN' token and no trailing slash, so allow these as well.

Signed-off-by: Yorkie Liu <yazhong.liu@rokid.com>
[reword commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-19 15:36:05 +01:00
Yousong Zhou
3cc31ea8d3 scripts/qemustart: more compact rand_mac()
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-12-17 04:16:34 +00:00
Jo-Philipp Wich
d157a76c67 script: ipkg-build: honour $SOURCE_DATE_EPOCH
When the SOURCE_DATE_EPOCH environment variable is set, use it to
override the timestamps of .ipk archive contents.

This ensures that .ipk archives built in environments without SCM
metadata (mainly the SDK) are reproducible between different runs.

Ref: https://github.com/openwrt/packages/issues/6954
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-11-08 11:52:33 +01:00
Hauke Mehrtens
3361a8817e scripts: update config.guess and config.sub
This updates these two files to commit 2fa97a8a0ed3 ("config.guess
(amd64:CYGWIN*:*:*, x86_64:CYGWIN*:*:*): Set master") which is the
current master of
https://git.savannah.gnu.org/gitweb/?p=config.git;a=summary

This contains updates for multiple architectures and will unbreak the
build on the x32 ABI.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-01 17:16:52 +01:00
Sven Eckelmann
78a5d25dca ar71xx: Skip more hashed blocks for OM2P(-HS) 64k variant
The OM2P(-HS)v4 got a variant which uses a slightly different flash. The
standard versions used a flash with 256KB blocks which is no longer
available. The replacement flash uses a flash with 64K blocks.

The padding for the image rootfs is already for 64K and 256K and thus can
be flashed on the device without any problems. Unfortunately, the
bootloader will check $rootfs_size (rounded down to the nearest 64k block)
minus 1x 64k. But it is now possible that the new JFFS2 rootfs_data starts
even earlier and modifies the checked region. The check will then fail and
the backup image (when available) will be booted.

Just setting it to the same number of skipped blocks as other 64K models
avoids this problem.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-09-10 10:01:58 +02:00
Yousong Zhou
9e58c20ec9 scripts/ipkg-build: quash error messages when conffiles.resolved is empty
When Package/xx/conffiles only contains directories that are empty at
package time, conffiles.resolved will be missing and the following
error messages will appear in the build log.

	/home/yousong/git-repo/openwrt/openwrt/scripts/ipkg-build -c -o 0 -g 0 /home/yousong/git-repo/openwrt/openwrt/build_dir/target-mips_24kc_musl/linux-malta_be/openvswitch-2.10.0/ipkg-mips_24kc/openvswitch-common /home/yousong/git-repo/openwrt/openwrt/bin/packages/mips_24kc/packages
	mv: cannot stat 'CONTROL/conffiles.resolved': No such file or directory
	chmod: cannot access 'CONTROL/conffiles': No such file or directory

It will not break the ipkg-build process.  The change is merely cosmetic
to not cause confusion when reading logs

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-09-09 01:21:01 +00:00
Yousong Zhou
204081670b scripts/metadata.pm: avoid adding dup names in provides list
The need arises from building Open vSwitch kernel datapath modules, e.g.

 - kmod-openvswitch from Linux upstream
 - kmod-openvswitch-intree from openvswitch source code

where both provides virtual package "kmod-openvswitch" for userspace
packages to select and depend on

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-09-09 01:21:01 +00:00
Felix Fietkau
00f030a9c6 build: add support for enabling the rootfs/boot partition size option via target feature
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-03 12:06:24 +02:00
Jo-Philipp Wich
5ebcd32997 scripts: bundle-libraries: fix logic flaw
Previous refactoring of the script moved the LDSO detection into a
file-not-exists condition, causing onyl the very first executable to
get bundled.

Solve the problem by unconditionally checking for LDSO again.

Fixes: 9030a78a71 ("scripts: bundle-libraries: prevent loading host locales")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-29 14:19:43 +02:00
David Bauer
8e9a59a6b9 build: add mkrasimage
The current make-ras.sh image generation script for the ZyXEL NBG6617
has portability issues with bash. Because of this, factory images are
currently not built correctly by the OpenWRT buildbots.

This commit replaces the make-ras.sh by C-written mkrasimage.

The new mkrasimage is also compatible with other ZyXEL devices using
the ras image-format.
This is not tested with the NBG6616 but it correctly builds the
header for ZyXEL factory image.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-08-28 11:26:53 +02:00
Jo-Philipp Wich
9030a78a71 scripts: bundle-libraries: prevent loading host locales (FS#1803)
Binary patch the bundled glibc library to inhibit loading of host locale
archives in order to avoid triggering internal libc assertions when
invoking shipped, bundled executables.

The problem has been solved with upstream Glibc commit
0062ace229 ("Gracefully handle incompatible locale data") but we still
need to deal with older Glibc binaries for some time to come.

Fixes FS#1803
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-27 12:51:07 +02:00
Jo-Philipp Wich
a692e4e3de scripts: time.pl: avoid hard Time::HiRes dependency
Use Time::HiRes when available and fallback to raw syscall interface
when not. If that fails too, simply report 0, 0 as real time.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-05 12:24:01 +02:00
Jo-Philipp Wich
d3ddf6631e build: remove GNU time dependency
Replace the GNU time program invocation with a simple Perl script reporting
the timing values. Since we require Perl anyway for the build system, we can
as well use that instead of requiring a random GNU utility rarely installed
by default.

Fixes: ff6e62b288 ("build: log time taken by each packages/steps")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-05 00:06:27 +02:00
Paul Schulz
7bbd1855cd config: Change conf.c remove compiler warnings
Compiler is producing the warning:
   warning: format not a string literal and no format arguments
   [-Wformat-security]

This patch makes the format a literal string in printf statements.

This with: gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3) in Ubuntu 18.04

Signed-off-by: Paul Schulz <paul@mawsonlakes.org>
2018-07-30 10:43:36 +02:00
Yousong Zhou
ac10975cd7 scripts/dl_github_archive.py: stringify exception
Closes openwrt/openwrt#1163

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-07-17 17:27:01 +00:00
Matthias Schiffer
16035a7dd3
include/feeds.mk: rework generation of opkg distfeeds.conf
Allow enabling/commenting/disabling each feed individually by using a
tristate config symbol.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-07-12 21:18:41 +02:00
Matthias Schiffer
6bdd5d8459
scripts/feeds: add src-dummy method
The src-dummy method does not actually obtain any feed, but it can be used
to insert addtional entries into the opkg distfeeds.conf. This is useful to
make package feeds available to users without requiring the corresponding
source feeds to be available during build.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-07-12 21:16:40 +02:00
Yousong Zhou
04b9f85873 scripts/dl_github_archive.py: rename from download.py
- Make the code more GitHub-specific
 - Requires mirror hash to work with .gitattributes
 - Use different API depending on whether PKG_SOURCE_VERSION is a
   complete commit id or other ref types like tags
 - Fix removing symbolic link
 - pre-clean dir_untar for possible leftovers from previous run

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-07-05 01:30:57 +08:00
Yousong Zhou
eb6759cc78 fixup-makefile.pl: fixup when PKG_SOURCE is defined elsewhere
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-07-05 01:30:57 +08:00
Felix Fietkau
29b2199eb0 build: fix target metadata scan dependencies
Move SCAN_DEPS to scan.mk to eliminate redundancy with scripts/feeds
Add image/*.mk to SCAN_DEPS for targets to pick up newly added devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-02 14:27:06 +02:00