Commit Graph

60417 Commits

Author SHA1 Message Date
Stijn Tintel
72afe56430 qoriq: refresh kernel 5.15 config
Done with `make kernel_oldconfig`.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2024-04-18 00:23:30 +03:00
Chukun Pan
9cef2bc224 ipq807x: add support for Zbtlink ZBT-Z800AX
Hardware specifications:
  SoC: Qualcomm IPQ8072A
  RAM: 1GB of DDR4 600MHz
  Flash1: Winbond W25Q64DW 8MB
  Flash2: MX30UF2G28AD 256MB
  WiFi1: QCN5024 2.4GHz AX 4x4
  WiFi2: QCN5054 5GHz AX 4x4
  Ethernet: 5x 1G RJ45 port
  USB: 2x USB 3.0 (1x M.2)
  Button: Reset, WPS

Flash instructions:
  Upload factory.bin in stock firmware's
  upgrade page, do not preserve settings.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2024-04-17 12:08:56 +02:00
Chukun Pan
74eb718871 ipq-wifi: update to version 2024-04-16
Contains following updates:

 * ipq8074: add Spectrum SAX1V1K BDF
 * ipq8074: add Zbtlink ZBT-Z800AX BDF
 * ipq8074: update regdb in Spectrum SAX1V1K BDF
 * ipq6018: add Linksys MR7350 BDF

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2024-04-17 12:08:56 +02:00
Christian Marangi
2b6923bc76
tools: zstd: update patch with upstream version
Proposed fixup has been replaced and merged with an advanced version.

install-pc-mt has been dropped and replaced for intall-pc MT=1 to
generate a .pc file with multithread libs.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-04-17 11:29:14 +02:00
Chen Minqiang
44a3c18a31 qmi: add sourcefilter option support
This make source based IPv6 routing option available for qmi

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2024-04-17 12:34:27 +08:00
Chen Minqiang
044fb8fc13 mbim: add sourcefilter option support
This make source based IPv6 routing option available for mbim

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2024-04-17 12:34:27 +08:00
Chen Minqiang
01e8d822e8 ncm: add sourcefilter option support
This make source based IPv6 routing option available for ncm

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2024-04-17 12:34:27 +08:00
Chuanhong Guo
9f6a28b91e ipset: update to 7.21
release notes:
7.21: https://www.spinics.net/lists/netfilter-devel/msg85299.html
7.20: https://www.spinics.net/lists/netfilter-devel/msg85120.html
7.19: https://www.spinics.net/lists/netfilter-devel/msg82985.html

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2024-04-17 12:14:20 +08:00
Chuanhong Guo
c7fb5d4cac ipset: include libgen.h for basename
musl dropped the GNU version of basename prototype from string.h
in 1.2.5.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2024-04-17 12:14:20 +08:00
Zoltan HERPAI
3ed8927cf5 sunxi: fix network bringup on Olinuxino Micro boards
It's the A13-based Olinuxino Micro which has only wireless interfaces. The
A20-based board is a fully-fledged one which has an ethernet interface.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-04-17 01:10:24 +02:00
Hauke Mehrtens
9693ed6a9e kernel: bump 5.15 to 5.15.155
Manual adapted the following patches:
   generic/hack-5.15/221-module_exports.patch
   octeontx/patches-5.15/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-16 23:11:25 +02:00
Robert Marko
ac881ce59a tools: mold: update to 2.30.0
Release Notes:
https://github.com/rui314/mold/releases/tag/v2.3.3
https://github.com/rui314/mold/releases/tag/v2.4.0
https://github.com/rui314/mold/releases/tag/v2.4.1
https://github.com/rui314/mold/releases/tag/v2.30.0

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-16 21:52:57 +02:00
Rodrigo Balerdi
1c32cee348 ipq40xx: whw03v2: enable additional 5 GHz channels
This device supports channel ranges 36-64 and 100-165, just like
others based on the same reference design, but its current DTS is
unnecessarily restricting these ranges to 36-48 and 149-165.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2024-04-16 21:51:48 +02:00
Zoltan HERPAI
bc4342142c sunxi: update a13-olimex-som DTS path
In preparation for supporting kernel 6.6, where the DTS files are grouped into
vendors - similarly to what arm64 has been doing all along -, update the
SUNXI_DTS var of this board to prepend it with SUNXI_DTS_DIR.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-04-16 19:41:58 +02:00
Zoltan HERPAI
12137cb460 pistachio: remove 5.15 support
Now that 6.1 is default, remove 5.15 support.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-04-16 12:35:05 +02:00
Zoltan HERPAI
20bf7c3ff7 pistachio: default to kernel 6.1
6.1 has been present as testing for some time now, so switch the
default to it.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-04-16 12:20:59 +02:00
Hauke Mehrtens
8c3dfdc46b kernel: Add missing config option
Kernel 6.1.83 allows to select CONFIG_GPIO_VF610, deactivate it by
default.

This fixes compilation of the armsr/armv8 target.

Fixes: 2ad898e091 ("kernel: bump 6.1 to 6.1.83")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-15 22:50:34 +02:00
Felix Fietkau
d4742de1d7 Revert "elfutils: fix a missing typedef in the last update"
This reverts commit a9e22ffa50.
After doing a clean rebuild, it turns out that this change is not necessary

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-04-15 22:05:24 +02:00
Robert Marko
2116073f98 tools: libdeflate: backport fix for AVX-VNNI
Trying to compile with new new enough GCC but older binutils that dont
support AVX-VNNI will error out on the assembler, so backport an upstream
fix for it.

Fixes: 338b463e1e ("tools: libdeflate: update to 1.20")
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-15 13:52:37 +02:00
Felix Fietkau
123282d9f9 netifd: add missing error checks to packet steering script
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-04-15 13:46:05 +02:00
Felix Fietkau
a9e22ffa50 elfutils: fix a missing typedef in the last update
Fixes perf

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-04-15 13:46:05 +02:00
Tony Ambardar
20c0dfb8e1 tools/dwarves: add myself as PKG_MAINTAINER
Missed setting this when first adding package.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2024-04-15 12:43:37 +02:00
Felix Fietkau
93d75f8401 bridger: update to Git HEAD (2024-04-15)
3159bbe0a2eb improve isolation when selecting a fixed output port
c77a7a1ff74d nl: fix getting flow offload stats
a08e51e679dd add support for disabling bridge-local flows via config

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-04-15 11:29:24 +02:00
Vince McKinsey
cab2e1de0d ramips: Add support for D-Link DIR-3040 A1
This adds support for the A1 hardware revision of the DIR-3040.
It is an exact copy of the DIR-3060 save for some cosmetic changes to the housing.
Even going so far as having the same FCC ID.

Hardware specification:
SoC: MediaTek MT7621AT
Flash: Winbond W29N01HVSINA 128MB
RAM: Micron MT41K128M16JT-125 256MB
Ethernet: 5x 10/100/1000 Mbps
WiFi1: MT7615DN 2.4GHz N 2x2:2
WiFi2: MT7615DN 5GHz AC 2x2:2
WiFi3: MT7615N 5GHz AC 4x4:4
Button: WPS, Reset

Flash instructions:
OpenWrt can be installed via D-Link Recovery GUI:
NOTE: Seems to only work in Firefox on Windows.
Tried with Chrome on Windows, Firefox in Linux, and Chromium in Linux.
None of these other browsers worked.

    1. Push and hold reset button (on the bottom of the device) until power led
	starts flashing (about 10 secs or so) while plugging in the power cable.
    2. Give it ~30 seconds, to boot the recovery mode GUI
    3. Connect your client computer to LAN1 of the device
    4. Set your client IP address manually to 192.168.0.2 / 255.255.255.0.
    5. Call the recovery page for the device at http://192.168.0.1/
    6. Use the provided emergency web GUI to upload and flash a new firmware to the device

Thanks to @Lucky1openwrt and @iivailo for creating the DIR-3060 DTS file and related changes,
so it was possible for me to adapt them to the DIR-3040, build images,
test and fix minor issues.

MAC Addresses:

| use | address | example |
| --- | --- | --- |
| LAN | label | f4:*:61 |
| WAN | label + 4 | f4:*:65 |
| WI1/2g | label + 2 | f4:*:63 |
| WI1/5g | label + 1 | f4:*:62 |
| WI2/5g | label + 3 | f4:*:64 |

The label MAC address was found in Factory, 0xe000

Checklist:

✓ nand
✓ ethernet
✓ button
✓ wifi2g
✓ wifi5g
✓ wifi5g
✓ mac
✓ led

Signed-off-by: Vince McKinsey <vincemckinsey@gmail.com>
2024-04-14 20:34:36 +02:00
Robert Marko
338b463e1e tools: libdeflate: update to 1.20
Changes:
* Improved CRC-32 performance on recent x86 CPUs by adding
VPCLMULQDQ-accelerated implementations using 256-bit and 512-bit vectors.

* Improved Adler-32 performance on recent x86 CPUs by adding
VNNI-accelerated implementations using 256-bit and 512-bit vectors.

* Improved CRC-32 and Adler-32 performance on short inputs.

* Optimized the portable implementation of Adler-32.

* Added some basic optimizations for RISC-V.

* Dropped support for gcc versions older than v4.9 (released in 2014) and
clang versions older than v3.9 (released in 2016).

* Dropped support for CRC-32 acceleration on 32-bit ARM using the ARMv8 pmull or crc32 instructions.
This code only worked on CPUs that also have a 64-bit mode, and it was
already disabled on many compiler versions due to compiler limitations.
CRC-32 acceleration remains fully supported on 64-bit ARM.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-14 19:52:46 +02:00
INAGAKI Hiroshi
e0cc69bef4 mvebu: fix LEDs on IIJ SA-W2
On IIJ SA-W2, some multiple LEDs have no "function" property and only
"color" property is available for the newer binding of LED on Linux
Kernel.
9d93b6d091 ("mvebu: drop redundant label with new LED color/function
format") removes "label" property from LEDs, then, multiple "<color>:"
(ex.: "green:"/"red:") will be appeared and renamed to "<color>:_<num>"
(ex.: "green:_1", "green:_2", ...) by kernel.

log:

[    1.911118] leds-gpio leds: Led green: renamed to green:_1 due to name collision
[    1.918600] leds-gpio leds: Led red: renamed to red:_1 due to name collision
[    1.925727] leds-gpio leds: Led green: renamed to green:_2 due to name collision
[    1.933202] leds-gpio leds: Led red: renamed to red:_2 due to name collision
[    1.940321] leds-gpio leds: Led green: renamed to green:_3 due to name collision
[    1.947797] leds-gpio leds: Led red: renamed to red:_3 due to name collision
[    1.954939] leds-gpio leds: Led green: renamed to green:_4 due to name collision
[    1.962456] leds-gpio leds: Led green: renamed to green:_5 due to name collision

/sys/class/leds:

root@OpenWrt:/# ls /sys/class/leds/
green:        green:_3      green:status  red:_2
green:_1      green:_4      red:          red:_3
green:_2      green:_5      red:_1        red:status

Fix this issue by adding missing "function" (and "function-enumerator")
property to those LEDs on IIJ SA-W2.

Fixes: 9d93b6d091 ("mvebu: drop redundant label with new LED color/function format")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-04-14 19:46:30 +02:00
INAGAKI Hiroshi
5038ec5bba mvebu: fix LEDs on Fortinet FortiGate devices
On Fortinet FortiGate 30E/50E, some multiple LEDs have no "function"
property and only "color" property is available for the new binding of
LED on Linux Kernel.
9d93b6d091 ("mvebu: drop redundant label with new LED color/function
format") removes "label" property from LEDs, then, multiple "<color>:"
(ex.: "green:"/"red:"/"amber:") will be appeared as LED names and
renamed to "<color>:_<num>" (ex.: "green:_1", "green:_2", ...) by
kernel.

log:

[   12.425170] leds-gpio gpio-leds: Led green: renamed to green:_1 due to name collision
[   12.520390] leds-gpio gpio-leds: Led amber: renamed to amber:_1 due to name collision
[   12.614931] leds-gpio gpio-leds: Led green: renamed to green:_2 due to name collision
[   12.709895] leds-gpio gpio-leds: Led green: renamed to green:_3 due to name collision
[   12.804439] leds-gpio gpio-leds: Led amber: renamed to amber:_2 due to name collision
[   12.898969] leds-gpio gpio-leds: Led green: renamed to green:_4 due to name collision
[   12.993504] leds-gpio gpio-leds: Led amber: renamed to amber:_3 due to name collision
[   13.088033] leds-gpio gpio-leds: Led green: renamed to green:_5 due to name collision
[   13.182570] leds-gpio gpio-leds: Led green: renamed to green:_6 due to name collision
[   13.277103] leds-gpio gpio-leds: Led amber: renamed to amber:_4 due to name collision
[   13.371636] leds-gpio gpio-leds: Led green: renamed to green:_7 due to name collision

/sys/class/leds:

root@OpenWrt:/# ls /sys/class/leds/
amber:        amber:_4      green:_2      green:_6      red:alarm
amber:_1      amber:alarm   green:_3      green:_7      red:status
amber:_2      green:        green:_4      green:status
amber:_3      green:_1      green:_5      red:

Fix this issue by adding missing "function" (and "function-enumerator")
property those to LEDs on Fortinet FortiGate devices.
Note: there is no appropriate function for "ha" LEDs in
dt-bindings/leds/common.h, so use the hardcoded string for them instead.

Fixes: 9d93b6d091 ("mvebu: drop redundant label with new LED color/function format")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-04-14 19:46:30 +02:00
INAGAKI Hiroshi
3bdc68279a kernel: add pending patches for new LED_FUNCTION_* definitions
Add pending patches to add LED_FUNCTION_MOBILE and LED_FUNCTION_SPEED_*
definitions for Fortinet FortiGate devices and IIJ SA-W2.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-04-14 19:46:30 +02:00
Felix Golatofski
ee3a6adc6c ath79: add support for Comfast CF-EW71 v2
Specifications:
Qualcomm/Atheros QCA9531
2x 10/100 Mbps Ethernet, with 48v PoE
2T2R 2.4 GHz, 802.11b/g/n
128MB RAM
16MB SPI Flash
4x LED (Always On Power, LAN, WAN, WLAN)

Flashing instructions:
The original firmware is based on OpenWrt, so flashing the sysupgrade image over the factory firmware is sufficient.
The bootloader has a built-in recovery web-ui. This is the method I used to flash OpenWrt. You can get to the recovery web-ui by holding down the reset button for a few seconds (~5s) while pluggin in the router. The LEDs should start blinking fast and the router should be available on 192.168.1.1 for the recovery.

Tested: Reset button, WAN LED, LAN LED, Power LED (always on, not much to test), WLAN LED, MAC addresses (same as factory firmware).

Signed-off-by: Felix Golatofski <git@xdfr.de>
2024-04-14 19:20:06 +02:00
Tianling Shen
a65fceb078 uboot-rockchip: Update to 2024.04
Removed upstreamed patch.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-04-14 18:29:44 +02:00
Tianling Shen
d2d064e06e rkbin: bump to latest git HEAD
Fixed bugs for memory initialization/training,
improved memory compatibility/stability.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-04-14 18:29:44 +02:00
Hauke Mehrtens
2909cce1b2 kernel: bump 6.1 to 6.1.86
Removed upstreamed:
   bcm27xx/patches-6.1/950-1235-drm-vc4-don-t-check-if-plane-state-fb-state-fb.patch  [1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.86&id=48bfb4b03c5ff6e1fa1dc73fb915e150b0968c40

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
Hauke Mehrtens
1a44a260fe kernel: bump 6.1 to 6.1.84
Removed upstreamed:
   pistachio/patches-6.1/110-pwm-img-fix-clock-lookup.patch [1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.84&id=44b6fb6cdedb2c391a2da355521d4610b2645fcc

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
Hauke Mehrtens
2ad898e091 kernel: bump 6.1 to 6.1.83
Removed upstreamed:
   generic/backport-6.1/789-STABLE-01-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch [1]
   generic/backport-6.1/789-STABLE-02-net-dsa-mt7530-fix-link-local-frames-that-ingress-vl.patch [2]
   generic/backport-6.1/789-STABLE-03-net-dsa-mt7530-fix-handling-of-all-link-local-frames.patch [3]
   generic/pending-6.1/735-net-mediatek-mtk_eth_soc-release-MAC_MCR_FORCE_LINK-.patch [4]
   generic/pending-6.1/736-net-ethernet-mtk_eth_soc-fix-PPE-hanging-issue.patch [5]

Manual adjusted the following patches:
  mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=be4512b9ac6fc53e1ca8daccbda84f643215c547
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=f1fa919ea59655f73cb3972264e157b8831ba546
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=86c0c154a759f2af9612a04bdf29110f02dce956
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=6b62bad2da1b338f452a9380639fc9b093d75a25
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=f78807362828ad01db2a9ed005bf79501b620f27

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
Hauke Mehrtens
9ea685d862 kernel: Reorder generic kernel 6.1 config
This reordering was done using these commands:
./scripts/kconfig.pl '+' target/linux/generic/config-6.1 /dev/null > target/linux/generic/config-6.1-new
mv target/linux/generic/config-6.1-new target/linux/generic/config-6.1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
John Audia
86171d4d6e kernel: bump 6.6 to 6.6.27
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.27

Removed upstreamed:
	pending-6.6/981-gcc-plugins-stackleak-Avoid-.head.txt.section.patch[1]

All patches automatically rebased.

1. 9dff96b8b3

Build system: x86/64
Build-tested: flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64/AMD Cezanne
Run-tested: flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
2024-04-14 17:50:27 +02:00
John Audia
ec97609154 x86: generic: config-6.6: refresh
Ran `make kernel_menuconfig`

Reference to CONFIG_SPECTRE_BHI_ON=y[1]

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v6.6.26&id2=v6.6.25

Signed-off-by: John Audia <therealgraysky@proton.me>
2024-04-14 17:50:27 +02:00
John Audia
9d95934289 kernel: bump 6.6 to 6.6.26
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.26

Manually rebased:
	generic/hack-6.6/210-darwin_scripts_include.patch

Added pending:
	generic/pending-6.6/981-gcc-plugins-stackleak-Avoid-.head.txt.section.patch

All other patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, flogic/glinet_gl-mt6000
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, flogic/glinet_gl-mt6000

Signed-off-by: John Audia <therealgraysky@proton.me>
2024-04-14 17:50:27 +02:00
Hannu Nyman
87d7fa8885 toolchain/musl: Update to 1.2.5
Update musl C library to 1.2.5

This release adds extension functions statx and preadv2/pwritev2,
with fallback implementations for older kernels, and adds two new
ports: loongarch64 and riscv32. Minor changes to the printf family
of functions have been made for conformance to new standards
interpretations/requirements. TLSDESC support for riscv64 has also
been added.

Bugs fixed include some DNS issues related to new TCP fallback
functionality, several rare race conditions, potentially incorrect
return value when glob aborts, and several signifiant arch-specific
bugs affecting TLSDESC on arm, riscv64 icache flushing, and
sh sigsetjmp and dlsym RTLD_NEXT.

1.2.5 release notes:

new features:
- statx function (linux extension; via syscall and fallback using fstatat)
- clone function is now usable and gives _Fork-like consistency in child
- statvfs now provides f_type result
- preadv2 and pwritev2 (linux extension) syscall wrappers
- riscv64 TLSDESC support

new ports:
- loongarch64
- riscv32

compatibility:
- DNS resolver can now handle answers with long CNAME chains
- string.h no longer provides (C23-incompat) non-prototype decl of basename
- fstatat statx backend now matches stat syscall non-automounting behavior
- mntent interfaces now handle escaped whitespace in paths/options

standards updates:
- printf %lc of nul wchar now produces output
- snprintf and swprintf no longer fail on n > INT_MAX
- ppoll is now exposed in default feature profile

bugs fixed:
- some long DNS answers were wrongly rejected despite new TCP support
- glob could wrongly return GLOB_NOMATCH if aborted before any matches
- multithreaded set*id could malfunction from thread sequencing logic bug
- certain use of threads after fork could deadlock thread-list lock
- posix_spawn child could deadlock in race with async parent death
- mbrtowc return value was wrong if argument n exceeded UINT_MAX
- 80-bit extended acoshl and powl got some corner cases wrong
- syslog incorrectly generated localized timestamps

arch-specific bugs fixed:
- arm (32-bit) TLSDESC malfunctioned due to addends being processed wrong
- riscv64 icache flush operation was non-functional
- sh sigsetjmp failed to properly restore call-saved register r8 on return
- sh dlsym RTLD_NEXT did not identify calling module correctly

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[Removed patch adding basename hack again]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 17:38:09 +02:00
Tony Ambardar
e609b7486f elfutils: update to 1.91
Release Notes:
https://sourceware.org/pipermail/elfutils-devel/2024q1/006876.html

Refresh patch:
- 005-build_only_libs.patch

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2024-04-14 17:38:09 +02:00
Felix Fietkau
a205a5734e netifd: rewrite packet steering script
The new script uses a different strategy compared to the previous one.
Instead of trying to split flows by hash and spread them to all CPUs,
use RPS to redirect packets to a single core only.
Try to spread NAPI thread and RPS target CPUs across available CPUs
and try to ensure that the NAPI thread is on a different CPU than the
RPS target. This significantly reduces cycles wasted on the scheduler.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-04-14 16:24:37 +02:00
Rodrigo Balerdi
c2f52e42b1 ipq40xx: whw03v2: change LED color for 'running' state to blue
Change the RGB indicator LED color for the running state from green to
blue. There are various reasons for this change:

- In stock firmware, green means internet connection is up, red means it
  is down, and blue means indeterminate. To track stock behavior as
  closely as possible, OpenWrt should indicate blue by default.

- In the current 23.x OpenWrt releases for this router, the led glows
  blue all the time -not green- because the bootloader sets it blue
  and there is an OpenWrt bug that makes it unable to control the LED.
  The bug is fixed in master, so without this commit there would be an
  unexpected change of behavior for this device in the next release.

- The ports other closely related Linksys devices (such as EA8300 and
  MR8300) get this right and use blue for the running state.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2024-04-13 23:07:54 +02:00
Rodrigo Balerdi
fc62d66c20 ipq40xx: whw03v2: fix handling of RGB LED
The RGB LED should glow green in the 'running' state, but it
was glowing cyan because the blue component defaulted to 'on'.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2024-04-13 22:56:04 +02:00
Robert Marko
5fe0d296c1 mac80211: ath11k: support DT property to limit channels
Limiting allowed channels per device may be required and is commonly
supported on other drivers, so include a pending patch to add support for
the same.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-13 20:05:01 +02:00
Daniel Golle
eb13076e77 mediatek: fix DTS defining mt7530 switch phys but not referencing them
The upstream solution to define the MDIO bus in DT is a bit
more strict than our previous downstream solution doing the same thing
and now requires switch PHYs to be referenced in DT as well.

Arınç Ünal told us in #15141:
"With [the now upstream patch written by him which we backported], the
switch MDIO bus won't be assigned to ds->user_mii_bus when the switch
MDIO bus is defined on the device tree anymore. This was not the case
with the downstream patch.

When ds->user_mii_bus is populated, DSA will 1:1 map the port with
PHY. Meaning port with address 1 will be mapped to PHY with address 1.
Because that ds->user_mii_bus is not populated when the switch MDIO
bus is defined on the device tree, on every port node, the PHY address
must be supplied by the phy-handle property."

Add those phy-handles to affected devices' DT.

Fixes: 4354b34f6f ("generic: 6.6: sync mt7530 DSA driver with upstream")
Fixes: 401a6ccfaf ("generic: 6.1: sync mt7530 DSA driver with upstream")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-13 18:49:30 +01:00
Mieczyslaw Nalewaj
c08f8a4a49 ramips: add support for TP-Link EC220-G5 v2
TP-Link EC220-G5 v2 is a dual band router with 4 GbE ports
Advertised as AC1200 for its 867Mbps (2x2) 5GHz band
and 300 Mbps (2x2) 2.4GHz band.

Specs:
- SoC: MediaTek MT7620A
- Ethernet: 4x GbE ports (Realtek RTL8367S)
- Wireless 2.4GHz: MediaTek MT7620A
- Wireless 5GHz: MediaTek MT7612E
- RAM: 64MiB
- ROM: 8MiB (W25Q64BV)
- 2 Buttons (WPS and reset)
- 7 LEDs

Flash instructions via serial console:
1. Rename the factory.bin to to test.bin
2. start a TFTP server from IP address 192.168.0.225 and serve the image named test.bin
3. connect your device to the LAN port
4. power up the router and press 4 on the console to stop the boot process.
5. enter the following commands on the router console
	tftp 0x80060000 test.bin
	erase tplink 0x20000 0x7a0000
	cp.b 0x80060000 0x20000 0x7a0000
	reset

Flash instructions via TFTP:
1. Update orginal firmware of the router to the latest one.
2. Rename openwrt-ramips-mt7620-tplink_ec220-g5-v2-squashfs-tftp-recovery.bin to tp_recovery.bin
3. Change computer IP to 192.168.0.66
4. Run TFTP serwer
5. Start the router with the reset button pressed, the file will be automatically downloaded and after a while the router will restart.
6. After updating, set your computer's IP to DHCP

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-13 17:40:51 +02:00
Mieczyslaw Nalewaj
ada3c41acd ramips: mt7620a_tplink_archer.dtsi rename to mt7620a_tplink_8m.dtsi
Change the name mt7620a_tplink_archer.dtsi to mt7620a_tplink_8m.dtsi because it will also be a base for TP-Link non-Archer routers.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-13 17:40:51 +02:00
Mieczyslaw Nalewaj
6258492e1b ramips: TP-Link Archer C2 v1: simplification of the dts definition
Import from the mt7620a_tplink_archer.dtsi file and thus simplify the rest of the definition.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-13 17:40:51 +02:00
Mieczyslaw Nalewaj
c97be14c8c ramips: mt7620a_tplink_archer.dtsi - remove unnecessary nvmem-cells definitions
Remove unnecessary nvmem-cells definitions that are being redefined anyway.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-13 17:40:51 +02:00
Felix Fietkau
ab9a29a320 mac80211: improve mesh fast tx patch
Change hash key struct size for faster lookup.
Fix clearing cache entries for forwarding

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-04-13 16:33:45 +02:00