Commit Graph

29921 Commits

Author SHA1 Message Date
Stijn Tintel
3908b77c9e qoriq: add kernel 6.1 support
Add support for kernel 6.1 as testing kernel for qoriq. Refresh config
using `make kernel_oldconfig`.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2024-04-18 00:30:03 +03:00
Stijn Tintel
3f9a9753f9 kernel/qoriq: Restore kernel files for v5.15
This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.

See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2024-04-18 00:23:36 +03:00
Stijn Tintel
fccaffe747 kernel/qoriq: Create kernel files for v6.1 (from v5.15)
This is an automatically generated commit.

When doing `git bisect`, consider `git bisect --skip`.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2024-04-18 00:23:36 +03:00
Stijn Tintel
72afe56430 qoriq: refresh kernel 5.15 config
Done with `make kernel_oldconfig`.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2024-04-18 00:23:30 +03:00
Chukun Pan
9cef2bc224 ipq807x: add support for Zbtlink ZBT-Z800AX
Hardware specifications:
  SoC: Qualcomm IPQ8072A
  RAM: 1GB of DDR4 600MHz
  Flash1: Winbond W25Q64DW 8MB
  Flash2: MX30UF2G28AD 256MB
  WiFi1: QCN5024 2.4GHz AX 4x4
  WiFi2: QCN5054 5GHz AX 4x4
  Ethernet: 5x 1G RJ45 port
  USB: 2x USB 3.0 (1x M.2)
  Button: Reset, WPS

Flash instructions:
  Upload factory.bin in stock firmware's
  upgrade page, do not preserve settings.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2024-04-17 12:08:56 +02:00
Zoltan HERPAI
3ed8927cf5 sunxi: fix network bringup on Olinuxino Micro boards
It's the A13-based Olinuxino Micro which has only wireless interfaces. The
A20-based board is a fully-fledged one which has an ethernet interface.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-04-17 01:10:24 +02:00
Hauke Mehrtens
9693ed6a9e kernel: bump 5.15 to 5.15.155
Manual adapted the following patches:
   generic/hack-5.15/221-module_exports.patch
   octeontx/patches-5.15/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-16 23:11:25 +02:00
Rodrigo Balerdi
1c32cee348 ipq40xx: whw03v2: enable additional 5 GHz channels
This device supports channel ranges 36-64 and 100-165, just like
others based on the same reference design, but its current DTS is
unnecessarily restricting these ranges to 36-48 and 149-165.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2024-04-16 21:51:48 +02:00
Zoltan HERPAI
bc4342142c sunxi: update a13-olimex-som DTS path
In preparation for supporting kernel 6.6, where the DTS files are grouped into
vendors - similarly to what arm64 has been doing all along -, update the
SUNXI_DTS var of this board to prepend it with SUNXI_DTS_DIR.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-04-16 19:41:58 +02:00
Zoltan HERPAI
12137cb460 pistachio: remove 5.15 support
Now that 6.1 is default, remove 5.15 support.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-04-16 12:35:05 +02:00
Zoltan HERPAI
20bf7c3ff7 pistachio: default to kernel 6.1
6.1 has been present as testing for some time now, so switch the
default to it.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-04-16 12:20:59 +02:00
Hauke Mehrtens
8c3dfdc46b kernel: Add missing config option
Kernel 6.1.83 allows to select CONFIG_GPIO_VF610, deactivate it by
default.

This fixes compilation of the armsr/armv8 target.

Fixes: 2ad898e091 ("kernel: bump 6.1 to 6.1.83")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-15 22:50:34 +02:00
Vince McKinsey
cab2e1de0d ramips: Add support for D-Link DIR-3040 A1
This adds support for the A1 hardware revision of the DIR-3040.
It is an exact copy of the DIR-3060 save for some cosmetic changes to the housing.
Even going so far as having the same FCC ID.

Hardware specification:
SoC: MediaTek MT7621AT
Flash: Winbond W29N01HVSINA 128MB
RAM: Micron MT41K128M16JT-125 256MB
Ethernet: 5x 10/100/1000 Mbps
WiFi1: MT7615DN 2.4GHz N 2x2:2
WiFi2: MT7615DN 5GHz AC 2x2:2
WiFi3: MT7615N 5GHz AC 4x4:4
Button: WPS, Reset

Flash instructions:
OpenWrt can be installed via D-Link Recovery GUI:
NOTE: Seems to only work in Firefox on Windows.
Tried with Chrome on Windows, Firefox in Linux, and Chromium in Linux.
None of these other browsers worked.

    1. Push and hold reset button (on the bottom of the device) until power led
	starts flashing (about 10 secs or so) while plugging in the power cable.
    2. Give it ~30 seconds, to boot the recovery mode GUI
    3. Connect your client computer to LAN1 of the device
    4. Set your client IP address manually to 192.168.0.2 / 255.255.255.0.
    5. Call the recovery page for the device at http://192.168.0.1/
    6. Use the provided emergency web GUI to upload and flash a new firmware to the device

Thanks to @Lucky1openwrt and @iivailo for creating the DIR-3060 DTS file and related changes,
so it was possible for me to adapt them to the DIR-3040, build images,
test and fix minor issues.

MAC Addresses:

| use | address | example |
| --- | --- | --- |
| LAN | label | f4:*:61 |
| WAN | label + 4 | f4:*:65 |
| WI1/2g | label + 2 | f4:*:63 |
| WI1/5g | label + 1 | f4:*:62 |
| WI2/5g | label + 3 | f4:*:64 |

The label MAC address was found in Factory, 0xe000

Checklist:

✓ nand
✓ ethernet
✓ button
✓ wifi2g
✓ wifi5g
✓ wifi5g
✓ mac
✓ led

Signed-off-by: Vince McKinsey <vincemckinsey@gmail.com>
2024-04-14 20:34:36 +02:00
INAGAKI Hiroshi
e0cc69bef4 mvebu: fix LEDs on IIJ SA-W2
On IIJ SA-W2, some multiple LEDs have no "function" property and only
"color" property is available for the newer binding of LED on Linux
Kernel.
9d93b6d091 ("mvebu: drop redundant label with new LED color/function
format") removes "label" property from LEDs, then, multiple "<color>:"
(ex.: "green:"/"red:") will be appeared and renamed to "<color>:_<num>"
(ex.: "green:_1", "green:_2", ...) by kernel.

log:

[    1.911118] leds-gpio leds: Led green: renamed to green:_1 due to name collision
[    1.918600] leds-gpio leds: Led red: renamed to red:_1 due to name collision
[    1.925727] leds-gpio leds: Led green: renamed to green:_2 due to name collision
[    1.933202] leds-gpio leds: Led red: renamed to red:_2 due to name collision
[    1.940321] leds-gpio leds: Led green: renamed to green:_3 due to name collision
[    1.947797] leds-gpio leds: Led red: renamed to red:_3 due to name collision
[    1.954939] leds-gpio leds: Led green: renamed to green:_4 due to name collision
[    1.962456] leds-gpio leds: Led green: renamed to green:_5 due to name collision

/sys/class/leds:

root@OpenWrt:/# ls /sys/class/leds/
green:        green:_3      green:status  red:_2
green:_1      green:_4      red:          red:_3
green:_2      green:_5      red:_1        red:status

Fix this issue by adding missing "function" (and "function-enumerator")
property to those LEDs on IIJ SA-W2.

Fixes: 9d93b6d091 ("mvebu: drop redundant label with new LED color/function format")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-04-14 19:46:30 +02:00
INAGAKI Hiroshi
5038ec5bba mvebu: fix LEDs on Fortinet FortiGate devices
On Fortinet FortiGate 30E/50E, some multiple LEDs have no "function"
property and only "color" property is available for the new binding of
LED on Linux Kernel.
9d93b6d091 ("mvebu: drop redundant label with new LED color/function
format") removes "label" property from LEDs, then, multiple "<color>:"
(ex.: "green:"/"red:"/"amber:") will be appeared as LED names and
renamed to "<color>:_<num>" (ex.: "green:_1", "green:_2", ...) by
kernel.

log:

[   12.425170] leds-gpio gpio-leds: Led green: renamed to green:_1 due to name collision
[   12.520390] leds-gpio gpio-leds: Led amber: renamed to amber:_1 due to name collision
[   12.614931] leds-gpio gpio-leds: Led green: renamed to green:_2 due to name collision
[   12.709895] leds-gpio gpio-leds: Led green: renamed to green:_3 due to name collision
[   12.804439] leds-gpio gpio-leds: Led amber: renamed to amber:_2 due to name collision
[   12.898969] leds-gpio gpio-leds: Led green: renamed to green:_4 due to name collision
[   12.993504] leds-gpio gpio-leds: Led amber: renamed to amber:_3 due to name collision
[   13.088033] leds-gpio gpio-leds: Led green: renamed to green:_5 due to name collision
[   13.182570] leds-gpio gpio-leds: Led green: renamed to green:_6 due to name collision
[   13.277103] leds-gpio gpio-leds: Led amber: renamed to amber:_4 due to name collision
[   13.371636] leds-gpio gpio-leds: Led green: renamed to green:_7 due to name collision

/sys/class/leds:

root@OpenWrt:/# ls /sys/class/leds/
amber:        amber:_4      green:_2      green:_6      red:alarm
amber:_1      amber:alarm   green:_3      green:_7      red:status
amber:_2      green:        green:_4      green:status
amber:_3      green:_1      green:_5      red:

Fix this issue by adding missing "function" (and "function-enumerator")
property those to LEDs on Fortinet FortiGate devices.
Note: there is no appropriate function for "ha" LEDs in
dt-bindings/leds/common.h, so use the hardcoded string for them instead.

Fixes: 9d93b6d091 ("mvebu: drop redundant label with new LED color/function format")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-04-14 19:46:30 +02:00
INAGAKI Hiroshi
3bdc68279a kernel: add pending patches for new LED_FUNCTION_* definitions
Add pending patches to add LED_FUNCTION_MOBILE and LED_FUNCTION_SPEED_*
definitions for Fortinet FortiGate devices and IIJ SA-W2.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-04-14 19:46:30 +02:00
Felix Golatofski
ee3a6adc6c ath79: add support for Comfast CF-EW71 v2
Specifications:
Qualcomm/Atheros QCA9531
2x 10/100 Mbps Ethernet, with 48v PoE
2T2R 2.4 GHz, 802.11b/g/n
128MB RAM
16MB SPI Flash
4x LED (Always On Power, LAN, WAN, WLAN)

Flashing instructions:
The original firmware is based on OpenWrt, so flashing the sysupgrade image over the factory firmware is sufficient.
The bootloader has a built-in recovery web-ui. This is the method I used to flash OpenWrt. You can get to the recovery web-ui by holding down the reset button for a few seconds (~5s) while pluggin in the router. The LEDs should start blinking fast and the router should be available on 192.168.1.1 for the recovery.

Tested: Reset button, WAN LED, LAN LED, Power LED (always on, not much to test), WLAN LED, MAC addresses (same as factory firmware).

Signed-off-by: Felix Golatofski <git@xdfr.de>
2024-04-14 19:20:06 +02:00
Hauke Mehrtens
2909cce1b2 kernel: bump 6.1 to 6.1.86
Removed upstreamed:
   bcm27xx/patches-6.1/950-1235-drm-vc4-don-t-check-if-plane-state-fb-state-fb.patch  [1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.86&id=48bfb4b03c5ff6e1fa1dc73fb915e150b0968c40

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
Hauke Mehrtens
1a44a260fe kernel: bump 6.1 to 6.1.84
Removed upstreamed:
   pistachio/patches-6.1/110-pwm-img-fix-clock-lookup.patch [1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.84&id=44b6fb6cdedb2c391a2da355521d4610b2645fcc

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
Hauke Mehrtens
2ad898e091 kernel: bump 6.1 to 6.1.83
Removed upstreamed:
   generic/backport-6.1/789-STABLE-01-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch [1]
   generic/backport-6.1/789-STABLE-02-net-dsa-mt7530-fix-link-local-frames-that-ingress-vl.patch [2]
   generic/backport-6.1/789-STABLE-03-net-dsa-mt7530-fix-handling-of-all-link-local-frames.patch [3]
   generic/pending-6.1/735-net-mediatek-mtk_eth_soc-release-MAC_MCR_FORCE_LINK-.patch [4]
   generic/pending-6.1/736-net-ethernet-mtk_eth_soc-fix-PPE-hanging-issue.patch [5]

Manual adjusted the following patches:
  mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=be4512b9ac6fc53e1ca8daccbda84f643215c547
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=f1fa919ea59655f73cb3972264e157b8831ba546
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=86c0c154a759f2af9612a04bdf29110f02dce956
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=6b62bad2da1b338f452a9380639fc9b093d75a25
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=f78807362828ad01db2a9ed005bf79501b620f27

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
Hauke Mehrtens
9ea685d862 kernel: Reorder generic kernel 6.1 config
This reordering was done using these commands:
./scripts/kconfig.pl '+' target/linux/generic/config-6.1 /dev/null > target/linux/generic/config-6.1-new
mv target/linux/generic/config-6.1-new target/linux/generic/config-6.1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-04-14 18:03:37 +02:00
John Audia
86171d4d6e kernel: bump 6.6 to 6.6.27
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.27

Removed upstreamed:
	pending-6.6/981-gcc-plugins-stackleak-Avoid-.head.txt.section.patch[1]

All patches automatically rebased.

1. 9dff96b8b3

Build system: x86/64
Build-tested: flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64/AMD Cezanne
Run-tested: flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
2024-04-14 17:50:27 +02:00
John Audia
ec97609154 x86: generic: config-6.6: refresh
Ran `make kernel_menuconfig`

Reference to CONFIG_SPECTRE_BHI_ON=y[1]

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v6.6.26&id2=v6.6.25

Signed-off-by: John Audia <therealgraysky@proton.me>
2024-04-14 17:50:27 +02:00
John Audia
9d95934289 kernel: bump 6.6 to 6.6.26
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.26

Manually rebased:
	generic/hack-6.6/210-darwin_scripts_include.patch

Added pending:
	generic/pending-6.6/981-gcc-plugins-stackleak-Avoid-.head.txt.section.patch

All other patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, flogic/glinet_gl-mt6000
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, flogic/glinet_gl-mt6000

Signed-off-by: John Audia <therealgraysky@proton.me>
2024-04-14 17:50:27 +02:00
Rodrigo Balerdi
c2f52e42b1 ipq40xx: whw03v2: change LED color for 'running' state to blue
Change the RGB indicator LED color for the running state from green to
blue. There are various reasons for this change:

- In stock firmware, green means internet connection is up, red means it
  is down, and blue means indeterminate. To track stock behavior as
  closely as possible, OpenWrt should indicate blue by default.

- In the current 23.x OpenWrt releases for this router, the led glows
  blue all the time -not green- because the bootloader sets it blue
  and there is an OpenWrt bug that makes it unable to control the LED.
  The bug is fixed in master, so without this commit there would be an
  unexpected change of behavior for this device in the next release.

- The ports other closely related Linksys devices (such as EA8300 and
  MR8300) get this right and use blue for the running state.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2024-04-13 23:07:54 +02:00
Rodrigo Balerdi
fc62d66c20 ipq40xx: whw03v2: fix handling of RGB LED
The RGB LED should glow green in the 'running' state, but it
was glowing cyan because the blue component defaulted to 'on'.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2024-04-13 22:56:04 +02:00
Daniel Golle
eb13076e77 mediatek: fix DTS defining mt7530 switch phys but not referencing them
The upstream solution to define the MDIO bus in DT is a bit
more strict than our previous downstream solution doing the same thing
and now requires switch PHYs to be referenced in DT as well.

Arınç Ünal told us in #15141:
"With [the now upstream patch written by him which we backported], the
switch MDIO bus won't be assigned to ds->user_mii_bus when the switch
MDIO bus is defined on the device tree anymore. This was not the case
with the downstream patch.

When ds->user_mii_bus is populated, DSA will 1:1 map the port with
PHY. Meaning port with address 1 will be mapped to PHY with address 1.
Because that ds->user_mii_bus is not populated when the switch MDIO
bus is defined on the device tree, on every port node, the PHY address
must be supplied by the phy-handle property."

Add those phy-handles to affected devices' DT.

Fixes: 4354b34f6f ("generic: 6.6: sync mt7530 DSA driver with upstream")
Fixes: 401a6ccfaf ("generic: 6.1: sync mt7530 DSA driver with upstream")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-13 18:49:30 +01:00
Mieczyslaw Nalewaj
c08f8a4a49 ramips: add support for TP-Link EC220-G5 v2
TP-Link EC220-G5 v2 is a dual band router with 4 GbE ports
Advertised as AC1200 for its 867Mbps (2x2) 5GHz band
and 300 Mbps (2x2) 2.4GHz band.

Specs:
- SoC: MediaTek MT7620A
- Ethernet: 4x GbE ports (Realtek RTL8367S)
- Wireless 2.4GHz: MediaTek MT7620A
- Wireless 5GHz: MediaTek MT7612E
- RAM: 64MiB
- ROM: 8MiB (W25Q64BV)
- 2 Buttons (WPS and reset)
- 7 LEDs

Flash instructions via serial console:
1. Rename the factory.bin to to test.bin
2. start a TFTP server from IP address 192.168.0.225 and serve the image named test.bin
3. connect your device to the LAN port
4. power up the router and press 4 on the console to stop the boot process.
5. enter the following commands on the router console
	tftp 0x80060000 test.bin
	erase tplink 0x20000 0x7a0000
	cp.b 0x80060000 0x20000 0x7a0000
	reset

Flash instructions via TFTP:
1. Update orginal firmware of the router to the latest one.
2. Rename openwrt-ramips-mt7620-tplink_ec220-g5-v2-squashfs-tftp-recovery.bin to tp_recovery.bin
3. Change computer IP to 192.168.0.66
4. Run TFTP serwer
5. Start the router with the reset button pressed, the file will be automatically downloaded and after a while the router will restart.
6. After updating, set your computer's IP to DHCP

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-13 17:40:51 +02:00
Mieczyslaw Nalewaj
ada3c41acd ramips: mt7620a_tplink_archer.dtsi rename to mt7620a_tplink_8m.dtsi
Change the name mt7620a_tplink_archer.dtsi to mt7620a_tplink_8m.dtsi because it will also be a base for TP-Link non-Archer routers.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-13 17:40:51 +02:00
Mieczyslaw Nalewaj
6258492e1b ramips: TP-Link Archer C2 v1: simplification of the dts definition
Import from the mt7620a_tplink_archer.dtsi file and thus simplify the rest of the definition.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-13 17:40:51 +02:00
Mieczyslaw Nalewaj
c97be14c8c ramips: mt7620a_tplink_archer.dtsi - remove unnecessary nvmem-cells definitions
Remove unnecessary nvmem-cells definitions that are being redefined anyway.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-04-13 17:40:51 +02:00
Stijn Tintel
291efaf765 realtek: fix filter_port_list_reverse calls
The function introduced in commit 7cbfe5654d is named
filter_port_list_reverse, not filter_port_list_reversed.

Fixes the following error on hpe,1920-8g-poe-65w and
hpe,1920-8g-poe-180w.

  /bin/board_detect: /etc/board.d/02_network: line 84: filter_port_list_reversed: not found

Fixes: 7cbfe5654d ("realtek: move port filtering out of uci_set_poe()")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Sander Vanheule <sander@svanheule.net>
2024-04-13 13:22:11 +03:00
Paul Spooren
2496f436a8
build: use zstd for IB, toolchain, SDK and LLVM compression
Use similar efficient but faster compression algorithm.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2024-04-13 08:05:04 +02:00
Paul Donald
ae192c042c
mediatek: mt7622: rtl8367c: source code spell fixes
Improves indexing and searches

Signed-off-by: Paul Donald <newtwen+github@gmail.com>
2024-04-12 14:46:32 +02:00
Paul Donald
81e4aabac3
mediatek: mt7622: rtl8367c: source comment fixes
Fix also some Chinese -> UTF8 encoding problems

Improves indexing and searches

Signed-off-by: Paul Donald <newtwen+github@gmail.com>
2024-04-12 14:46:32 +02:00
Paul Donald
90488d274e
mediatek: mt7622: rtl8367c: source comment fixes
Fix also some Chinese GB18030 -> UTF-8 encoding problems

(translated the Chinese strings to English):
修改 -> modification
port8~port10的设置在另外一个register ->
 port8~port10 setup is done in a separate register


You are in the correct (UTF-8) encoding when you see:
 * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $
e.g. week 3, 08 third month, 2017
But not if you see:
 * $Date: 2017-03-08 15:13:58 +0800 (閫变笁, 08 涓夋湀 2017) $


rtl8367c/rtl8367c_asicdrv_lut.c should be read as UTF-8, despite having
some earlier Chinese text lost to GB18030 encoding.

Improves indexing and searches

Signed-off-by: Paul Donald <newtwen+github@gmail.com>
2024-04-12 14:46:32 +02:00
Paul Donald
afad4e8ab6
mediatek: mt7622: rtl8367c: source comment fixes
Fix also some Chinese -> UTF8 encoding problems

Improves indexing and searches

Signed-off-by: Paul Donald <newtwen+github@gmail.com>
2024-04-12 14:46:32 +02:00
Paul Donald
a2b94afc0d
mediatek: mt7622: rtl8367c: source comment fixes
Improves indexing and searches

Signed-off-by: Paul Donald <newtwen+github@gmail.com>
2024-04-12 14:46:28 +02:00
Sean Khan
849ebc905b qualcommax: enhance smp_affinity (log, uci, syntax)
1.) Changed logic of `set_affinity` to now use physical cores rather than
    knowing the bitmask. Rather than having to know a bitmask, users can
    provide a numerical instance of one or more CPU cores
    (numbered 0-63).

    This is done via function `cpus_to_bitmask`.

    Functions Added:

    a.) bitmask_to_cpus - Takes a bitmask of CPUs and returns a
         list of CPU numbers. (i.e. `bitmask_to_cpus "f"` -> 0,1,2,3)

    b.) cpus_to_bitmask - Takes a comma/space or range list of CPUs and returns
         a bitmask.

         Example:
         `cpus_to_bitmask "2,3"`     -> c
         `cpus_to_bitmask "0,1,2,3"` -> f
         `cpus_to_bitmask "1,3"`     -> a

         With or without quotes
         `cpus_to_bitmask "1 3"`     -> a
         `cpus_to_bitmask  1 3`      -> a

2.) Added UCI options:

    enable     - to enable/disable the script from running.   [default 1 (on)]
    enable_log - to enable/disable logging output to `logger`.[default 1 (on)]

    Log output:
```
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(87) reo2host-destination-ring1    to CPU 0
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(88) reo2host-destination-ring2    to CPU 1
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(89) reo2host-destination-ring3    to CPU 2
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(90) reo2host-destination-ring4    to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(79) wbm2host-tx-completions-ring1 to CPU 1
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(83) wbm2host-tx-completions-ring2 to CPU 2
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(85) wbm2host-tx-completions-ring3 to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(73) ppdu-end-interrupts-mac1      to CPU 1
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(77) ppdu-end-interrupts-mac2      to CPU 2
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(75) ppdu-end-interrupts-mac3      to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(32) edma_txcmpl                   to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(33) edma_rxfill                   to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(35) edma_rxdesc                   to CPU 3
    Mon Apr  8 23:00:01 2024 user.notice smp_affinity: Pinning IRQ(36) edma_misc                     to CPU 3
```

    Output of `/proc/interrupts`:
```
 69:          0          0          0          0 GIC-0 209 Edge      rxdma2host-destination-ring-mac1
 70:          0          0          0          0 GIC-0 211 Edge      rxdma2host-destination-ring-mac3
 71:          0          0          0          0 GIC-0 210 Edge      rxdma2host-destination-ring-mac2
 72:       2435          0          0          0 GIC-0 321 Edge      reo2host-status
 73:     268427       8011          0          0 GIC-0 261 Edge      ppdu-end-interrupts-mac1
 74:          2          0          0          0 GIC-0 255 Edge      rxdma2host-monitor-status-ring-mac1
 75:     176169          0          4      10035 GIC-0 263 Edge      ppdu-end-interrupts-mac3
 76:          2          0          0          0 GIC-0 260 Edge      rxdma2host-monitor-status-ring-mac3
 77:          0          0          0          0 GIC-0 262 Edge      ppdu-end-interrupts-mac2
 78:          0          0          0          0 GIC-0 256 Edge      rxdma2host-monitor-status-ring-mac2
 79:       3428       3123          0          0 GIC-0 189 Edge      wbm2host-tx-completions-ring1
 80:          0          0          0          0 GIC-0 323 Edge      reo2ost-exception
 81:        178          0          0          0 GIC-0 322 Edge      wbm2host-rx-release
 82:          0          0          0          0 GIC-0 212 Edge      host2rxdma-host-buf-ring-mac1
 83:       6524          0      13712          0 GIC-0 190 Edge      wbm2host-tx-completions-ring2
 84:          4          0          0          0 GIC-0 235 Edge      host2rxdma-host-buf-ring-mac3
 85:        560          0          0       1979 GIC-0 191 Edge      wbm2host-tx-completions-ring3
 86:          0          0          0          0 GIC-0 215 Edge      host2rxdma-host-buf-ring-mac2
 87:       4520          0          0          0 GIC-0 267 Edge      reo2host-destination-ring1
 88:       2231       2811          0          0 GIC-0 268 Edge      reo2host-destination-ring2
 89:       2180          0       2512          0 GIC-0 271 Edge      reo2host-destination-ring3
 90:       1990          0          0       2321 GIC-0 320 Edge      reo2host-destination-ring4
```

3.) Added `uci-defaults` script `15_smp_affinity` to configure defaults
    options on first boot.

Signed-off-by: Sean Khan <datapronix@protonmail.com>
2024-04-12 13:22:12 +02:00
Robert Marko
076f945dfb qualcommax: drop 6.1 support
We have defaulted to 6.6 for a while so its time to completely drop 6.1
so new devices dont have to include patches for 6.1.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-11 17:26:47 +02:00
Robert Marko
923d7c5531
mediatek: filogic: add support for Edgecore EAP111
HW specifications:
* Mediatek MT7981A
* 256MB SPI-NAND
* 512MB DRAM
* Uplink: 1 x 10/100/1000Base-T Ethernet, Auto MDIX, RJ-45 with 802.3at
PoE (Built-in GBe PHY)
* LAN: 1 x 10/100/1000Base-T Ethernet, Auto MDIX, RJ-45 (Airoha EN8801SC)
* 1 Tricolor LED
* Reset button
* 12V/2.0A DC input

Installation:
Board comes with OpenWifi/TIP which is OpenWrt based, so sysupgrade can
be used directly over SSH.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2024-04-11 13:25:11 +02:00
Robert Marko
2dba4308d1
mediatek: add Airoha EN8801SC PHY driver
Airoha EN8801SC PHY is a gigabit PHY used on Edgecore EAP111 so, include
the MTK driver with some cleanups.

Unfortunatelly, there is no specification sheet nor datasheet available
in order to demistify the magic PBUS writes and work on upstreaming
this driver.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2024-04-11 13:10:15 +02:00
Daniel Golle
98f9154316 generic: 6.1, 6.6: import two pending patches for mt7530 DSA driver
First patch allows to inquire and modify Energy-Efficient-Ethernet
(EEE) settings via ethtool and thereby override the default setting of
a board done via bootstrap pins.

The second patch fixes a long-standing issue with STP (and similar
protocols) when using boards (or SoCs) governed by the mt7530 DSA
driver.

Both patches could also be (dirty-)applied to Linux 5.15, but I'd
rather just wait for that to happen via linux-stable to avoid the
mess.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-10 18:50:32 +01:00
Daniel Golle
4354b34f6f generic: 6.6: sync mt7530 DSA driver with upstream
Backport lots upstream changes, many of them fixes, for the mt7530 DSA
driver, similar to how it was done for Linux 6.1 in the previous commit.

The remaining differences compared to the upstream driver are only
the 'slave' -> 'user', 'master' -> 'conduit' language change in DSA
and the rename of 'struct ethtool_eee' to 'struct ethtool_keee' as
well as tree-wide replacement of ethtool_sprintf with ethtool_puts,
all of them do not have any functional impact.

Apart from some minor bug fixes and style improvements the switch
should now behave more conformant when it comes to link-local frames,
and we will again be able to cleanly pick patches from upstream.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-10 18:50:32 +01:00
Daniel Golle
401a6ccfaf generic: 6.1: sync mt7530 DSA driver with upstream
Backport lots upstream changes, many of them fixes, for the mt7530 DSA
driver. Some of them may or may not find they way into Linux 6.1
stable, some certainly won't because they are fixes for backported
commits which aren't even present in Linux 6.1 upstream.

Apart from adding new patches, also remove mutated patch
723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch
which should never have been added for Linux 6.1 -- it was applied
already upstream but coincidentally would fuzzy-apply in the wrong
place as well (for MT7530 instead of MT7531). While that didn't really
hurt anyone it is just unneeded.

The other deleted patch
795-mt7530-register-OF-node-for-internal-MDIO-bus.patch
has been replaced by an equivalent commit with a more complete patch
description by upstream maintainer Arınç Ünal.

The remaining differences compared to the upstream driver are:
 * C22/C45 MDIO ops aren't split
   Upstream did that, backporting it would require making changes to
   *all* DSA drivers
 * 'slave' -> 'user', 'master' -> 'conduit' language change in DSA
 * support for selecting preferred CPU port on MT7531
   Also this would require too many DSA framework changes potentially
   affecting other devices. If we ever really use Linux 6.1 in a
   release (I hope not) we can still reconsider to make the effort to
   backport that.

In addition to some minor bug fixes and style improvements the switch
should now behave more conformant when it comes to link-local frames,
and we will again be able to cleanly pick patches from upstream.

MAINTAIERS NOTE:
Three patches are already part of Linux stable and should be removed with
the next minor kernel version bump:
789-STABLE-01-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch
789-STABLE-02-net-dsa-mt7530-fix-link-local-frames-that-ingress-vl.patch
789-STABLE-03-net-dsa-mt7530-fix-handling-of-all-link-local-frames.patch

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-10 18:50:32 +01:00
Daniel Golle
a68eb99191 generic: add missing patch headers
Make sure all patches can be applied to a git tree using 'git am'
by adding missing patch headers where needed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-09 17:54:08 +01:00
Daniel Golle
1ae3c53466 mediatek: filogic: switch TP-LINK XDR series to fitblk
Instead of using the deprecated FIT partition parser, use the new
fitblk driver instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-09 15:07:41 +01:00
Daniel Golle
d4e8653e1e mvebu: puzzle-m90x: wipe rootfs_data on sysupgrade
The sysupgrade formware of the Puzzle series is a slightly strange
dual-boot approach while remaining compatible with Marvell's SDK
firmware upgrade binary format -- which happens to be a full-disk
image with GPT partition table. Hence that /lib/upgrade/emmc-puzzle.sh
script is like an exotic disease which results from those decisions,
and as we also want to somehow stay compatible with the IEI-World
stock firmware we got to use it in that same way (we are not
compatible with the QNAP-branded identical hardware device anyway).

Currently, on sysupgrade the result is that one ends up with the old
content of rootfs_data (a GPT partition on those devices) as nothing
ever wipes or in any way re-creates the filesystem there. As a simple
work-around, let's kill the filesystem on rootfs_data so fstools
re-formats it on the next boot.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-09 14:59:03 +01:00
Robert Marko
7c39a95a2f sdk: include lib/crtsavres.o for powerpc
Trying to link certain kernel modules like dahdi-linux when building with
the OpenWrt SDK will fail with:
openwrt-sdk-apm821xx-sata_gcc-13.2.0_musl.Linux-x86_64/staging_dir/toolchain-powerpc_464fp_gcc-13.2.0_musl/bin/powerpc-openwrt-linux-musl-ld: cannot find arch/powerpc/lib/crtsavres.o: No such file or directory

Previously this worked with the PowerPC SDK since we carried a hack that
was passing --save-restore-funcs to module LDFLAGS so the linker provided
the required functions automatically as without --save-restore-funcs it
doesnt do so automatically on relocatable links and as a sideffect did not
require the kernel provided crtsaves.o to link against.

Now that hack has been removed as upstream kernel now compiles crtsaves.o
by default so it can be linked against but its not included in the SDK.

So, lets include lib/crtsavres.o when SDK is generated for PowerPC.

Fixes: 99c9d8abd6 ("kernel: bump 5.15 to 5.15.148")
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-09 11:13:18 +02:00
Sean Khan
d606b84c4e qualcommax: Skip compiling unnecessary dtbs
Currently the compile phase of the kernel builds `Image dtbs modules`.
However, none of the dtbs that get built are used for the final image.

This ends up unnecessarily taking CPU cycles and produces a lot of
`WARNINGS` that can lead users to believe there's cause for concern. I
believe the same principle can be applied to other targets.

```
DTC     arch/arm64/boot/dts/qcom/msm8996-mtp.dtb
arch/arm64/boot/dts/qcom/msm8996.dtsi:2954.36-2962.5: Warning (clocks_property):
/soc/clock-controller@6400000: Missing property '#clock-cells' in node
/soc/mailbox@9820000 or bad phandle (referred from clocks[2])

DTC     arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dtb
arch/arm64/boot/dts/qcom/msm8996.dtsi:2954.36-2962.5: Warning (clocks_property):
/soc/clock-controller@6400000: Missing property '#clock-cells' in node
/soc/mailbox@9820000 or bad phandle (referred from clocks[2])

DTC     arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dtb
arch/arm64/boot/dts/qcom/msm8996.dtsi:2954.36-2962.5: Warning (clocks_property):
/soc/clock-controller@6400000: Missing property '#clock-cells' in node
/soc/mailbox@9820000 or bad phandle (referred from clocks[2])

DTC     arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dtb
arch/arm64/boot/dts/qcom/msm8996.dtsi:2954.36-2962.5: Warning (clocks_property):
/soc/clock-controller@6400000: Missing property '#clock-cells' in node
/soc/mailbox@9820000 or bad phandle (referred from clocks[2])

DTC     arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dtb
arch/arm64/boot/dts/qcom/msm8996.dtsi:2954.36-2962.5: Warning (clocks_property):
/soc/clock-controller@6400000: Missing property '#clock-cells' in node
/soc/mailbox@9820000 or bad phandle (referred from clocks[2])

DTC     arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dtb
arch/arm64/boot/dts/qcom/msm8996.dtsi:2954.36-2962.5: Warning (clocks_property):
/soc/clock-controller@6400000: Missing property '#clock-cells' in node
/soc/mailbox@9820000 or bad phandle (referred from clocks[2])

DTC     arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dtb
arch/arm64/boot/dts/qcom/msm8996.dtsi:2954.36-2962.5: Warning (clocks_property):
/soc/clock-controller@6400000: Missing property '#clock-cells' in node
/soc/mailbox@9820000 or bad phandle (referred from clocks[2])
```

Signed-off-by: Sean Khan <datapronix@protonmail.com>
2024-04-08 16:24:12 -04:00