Commit Graph

49494 Commits

Author SHA1 Message Date
Álvaro Fernández Rojas
3678778445 cypress-firmware: add proper package conflicts
There are linux firmwares packages for 43362, 43430 and 43455 which shouldn't
be installed at the same time as Cypress firmwares.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-11-25 10:30:44 +01:00
Karel Kočí
bbe302d2b6 ath10k-ct-firmware: add conflicts and better provides
This expands packages to define not only provides but also conflicts.
These packages provides same files so they should specify conflicts.

Second expansion is that *-ct-htt and *-ct-full-htt firmwares can also
provide *-ct variant as that allows explicit dependency on CT variant
with various firmware modifications.

Signed-off-by: Karel Kočí <karel.koci@nic.cz>
[Bump PKG_RELEASE and format PROVIDES/CONFLICTS]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-11-25 10:30:44 +01:00
Rosen Penev
ee1150e362 exfat: update to 5.10.1
Remove tar hacks and use PKG_BUILD_DIR.

Added missing URL.

Changelog:

d5eb2e1 exfat: remove useless check in exfat_move_file()
8cb2bc3 exfat: use i_blocksize() to get blocksize
4cd0435 exfat: fix misspellings using codespell tool
485d677 exfat: fix use of uninitialized spinlock on error path
03b3db6 exfat: remove 'rwoffset' in exfat_inode_info
90797eb exfat: replace memcpy with structure assignment
d144149 exfat: remove useless directory scan in exfat_add_entry()
fc67230 exfat: eliminate dead code in exfat_find()
7c25c64 exfat: fix pointer error checking
bfea1fb exfat: retain 'VolumeFlags' properly

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2020-11-24 23:14:40 -10:00
Paul Spooren
7c114f33dd opkg: purge package from cache on hash mismatch
61b3c62 opkg_verify_integrity: better logging and error conditions
f73d42f download: purge cached packages that have incorrect checksum
1c1480e download: factor out the logic for building cache filenames
293b1ce libopkg: factor out checksum and size verification
a786e25 download: remove compatibility with old cache naming scheme

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-24 22:06:37 -10:00
Jan Pavlinec
5bb3cc749e tcpdump: patch CVE-2020-8037
This PR backports upstream fix for CVE-2020-8037.  This fix is only
relevant for tcpdump package, tcpdump-mini is not affeted by this issue.

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
[added missing commit description]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-25 05:49:09 +01:00
Paul Spooren
0c87304d2b scripts: add size_compare.sh
As package size changes are a continuous topic on the mailing list this
scripts helps developers to compare their local package modifications
against latest upstream.

The script downloads the latest package indexes based on env variables
or the `.config` file. The script compares the actual installed size
(data.tar.gz) or the IPK package size.

An example output is found below:

```
user@dawn:~/src/openwrt/openwrt$ ./scripts/size_compare.sh
Compare packages of ath79/tiny/mips_24kc:
dropbear busybox iw ubus

Checking configuration difference
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   554  100   554    0     0    336      0  0:00:01  0:00:01 --:--:--   336

 --- start config diff ---
--- /tmp/config.DDjwVh-LOCAL	2020-11-23 09:08:28.913203068 -1000
+++ /tmp/config.DDjwVh-UPSTREAM	2020-11-23 09:08:36.369240887 -1000
@@ -1,5 +1,9 @@
+CONFIG_ALL_KMODS=y
+CONFIG_ALL_NONSHARED=y
 CONFIG_AUTOREBUILD=y
+CONFIG_AUTOREMOVE=y
--- 8< ---
 CONFIG_BINARY_FOLDER=""
+CONFIG_BUILDBOT=y
+CONFIG_TARGET_ALL_PROFILES=y
 CONFIG_TARGET_ROOTFS_DIR=""
 CONFIG_USE_SSTRIP=y
 CONFIG_USE_UCLIBCXX=y
 --- end config diff ---

Checking installed size

Fetching latest package indexes...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 80634  100 80634    0     0  33499      0  0:00:02  0:00:02 --:--:-- 33485
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 54082  100 54082    0     0  24252      0  0:00:02  0:00:02 --:--:-- 24252

Comparing package sizes...
Change 	Local	Remote 	Package
+271	51386	51115	base-files
+123	705241	705118	bnx2-firmware
+86	17209	17123	fstools
+22	47989	47967	procd
+21	208311	208290	busybox
+19	67181	67162	netifd

```

I plan to integrate this script into the CI so we have a summary how
sizes change over different architectures.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-24 18:18:48 -10:00
Matthew Gyurgyik
aab36200e7 imagebuilder: fix partition signature
When building images with the imagebuilder, the partition signature
never changes. The signature is generated by hashing SOURCE_DATE_EPOCH
and LINUX_VERMAGIC which are undefined. Prepopulate these variables, as
done by the SDK.

Signed-off-by: Matthew Gyurgyik <matthew@gyurgyik.io>
2020-11-24 14:46:05 -10:00
Álvaro Fernández Rojas
89854d3834 ath10k-ct: update to latest version
1d28d17 ath10k-ct: Fix RSSI reporting for wave-1 firmware.
0c2949e ath10k-ct: fwcfg allows configuring dma-burst setting.
13319ff ath10k-ct: stable patches, debugfs crashdump, 5.8 driver

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-11-24 17:43:15 +01:00
Martin Schiller
b4b829fe64 uqmi: set plmn only if necessary
Setting the plmn to '0' (auto) will implicitly lead to a (delayed)
network re-registration, which could further lead to some timing
related issues in the qmi proto handler.

On the other hand, if you switch back from manual plmn selection
to auto mode you have to set it to '0', because this setting is
permanently "saved" in the wwan module.

Conclusion:
If plmn is configured, check if it's already set euqally in the module.
If so, do nothing. Otherwise set it.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-11-24 15:18:16 +00:00
Tomasz Maciej Nowak
bc64b9c32e treewide: update email address of Tomasz Maciej Nowak
Replace my o2.pl email address.

I'm still available at the old address.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
[rephrase commit title/message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-24 15:39:07 +01:00
John Audia
9100566267 kernel: bump 5.4 to 5.4.79
Manually rebased patches:
  ath79/patches-5.4/910-unaligned_access_hacks.patch
  bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch
  bcm27xx/patches-5.4/950-0414-SQUASH-Fix-spi-driver-compiler-warnings.patch
  ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch

Removed since could be reverse-applied by quilt and found to be included upstream:
  ipq806x/patches-5.4/096-PCI-qcom-Make-sure-PCIe-is-reset-before-init-for-rev.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[refresh altered targets after rebase]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-24 15:36:59 +01:00
Yanase Yuki
cba79b1de2 ath79: move device specific nodes to DTS files for Devolo 1xxx
qca9558_devolo_dvl1xxx.dtsi contains device specific nodes which
are inherited for some DTS files and overwritten for others.

This is considered confusing, so move the relevant nodes/properties
to the devices and only keep the shared stuff in the DTSI.

Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
[clarify commit title/message, move &gmac_config in DTS]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-24 14:40:55 +01:00
Sander Vanheule
b0ecae504b ath79: support for TP-Link EAP225 v3
TP-Link EAP225 v3 is an AC1350 (802.11ac Wave-2) ceiling mount access
point. Serial port access for debricking requires fine soldering.

Device specifications:
* SoC: QCA9563 @ 775MHz
* RAM: 128MiB DDR2
* Flash: 16MiB SPI-NOR
* Wireless 2.4GHz (SoC): b/g/n, 3x3
* Wireless 5Ghz (QCA9886): a/n/ac, 2x2 MU-MINO
* Ethernet (AR8033): 1× 1GbE, 802.3at PoE

Flashing instructions:
* ssh into target device and run `cliclientd stopcs`
* Upgrade with factory image via web interface

Debricking:
* Serial port can be soldered on PCB J3 (1: TXD, 2: RXD, 3: GND, 4: VCC)
    * Bridge unpopulated resistors R225 (TXD) and R237 (RXD).
      Do NOT bridge R230.
    * Use 3.3V, 115200 baud, 8n1
* Interrupt bootloader by holding CTRL+B during boot
* tftp initramfs to flash via LuCI web interface
    setenv ipaddr 192.168.1.1 # default, change as required
    setenv serverip 192.168.1.10 # default, change as required
    tftp 0x80800000 initramfs.bin
    bootelf $fileaddr

MAC addresses:
MAC address (as on device label) is stored in device info partition at
an offset of 8 bytes. ath9k device has same address as ethernet, ath10k
uses address incremented by 1.
From OEM boot log:

    Using interface ath0 with hwaddr b0:...:3e and ssid "..."
    Using interface ath10 with hwaddr b0:...:3f and ssid "..."

Tested by forum user blinkstar88

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2020-11-23 22:53:15 +01:00
Sander Vanheule
4f86edf477 ath79: support for TP-Link EAP225-Outdoor v1
TP-Link EAP225-Outdoor v1 is an AC1200 (802.11ac Wave-2) pole or wall
mount access point. Debricking requires access to the serial port, which
is non-trivial.

Device specifications:
* SoC: QCA9563 @ 775MHz
* Memory: 128MiB DDR2
* Flash: 16MiB SPI-NOR
* Wireless 2.4GHz (SoC): b/g/n 2x2
* Wireless 5GHz (QCA9886): a/n/ac 2x2 MU-MIMO
* Ethernet (AR8033): 1× 1GbE, PoE

Flashing instructions:
* ssh into target device with recent (>= v1.6.0) firmware
* run `cliclientd stopcs` on target device
* upload factory image via web interface

Debricking:
To recover the device, you need access to the serial port. This requires
fine soldering to test points, or the use of probe pins.
* Open the case and solder wires to the test points: RXD, TXD and TPGND4
  * Use a 3.3V UART, 115200 baud, 8n1
* Interrupt bootloader by holding ctrl+B during boot
* upload initramfs via built-in tftp client and perform sysupgrade
    setenv ipaddr 192.168.1.1 # default, change as required
    setenv serverip 192.168.1.10 # default, change as required
    tftp 0x80800000 initramfs.bin
    bootelf $fileaddr

MAC addresses:
MAC address (as on device label) is stored in device info partition at
an offset of 8 bytes. ath9k device has same address as ethernet, ath10k
uses address incremented by 1.
From stock ifconfig:

    ath0      Link encap:Ethernet  HWaddr D8:...:2E
    ath10     Link encap:Ethernet  HWaddr D8:...:2F
    br0       Link encap:Ethernet  HWaddr D8:...:2E
    eth0      Link encap:Ethernet  HWaddr D8:...:2E

Tested by forum user PolynomialDivision on firmware v1.7.0.
UART access tested by forum user arinc9.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2020-11-23 22:53:15 +01:00
Sander Vanheule
b11ad48764 ath79: support for TP-Link EAP245 v1
TP-Link EAP245 v1 is an AC1750 (802.11ac Wave-1) ceiling mount access point.

Device specifications:
* SoC: QCA9563 @ 775MHz
* RAM: 128MiB DDR2
* Flash: 16MiB SPI-NOR
* Wireless 2.4GHz (SoC): b/g/n, 3x3
* Wireless 5Ghz (QCA9880): a/n/ac, 3x3
* Ethernet (AR8033): 1× 1GbE, 802.3at PoE

Flashing instructions:
* Upgrade the device to firmware v1.4.0 if necessary
* Exploit the user management page in the web interface to start telnetd
  by changing the username to `;/usr/sbin/telnetd -l/bin/sh&`.
* Immediately change the malformed username back to something valid
  (e.g. 'admin') to make ssh work again.
* Use the root shell via telnet to make /tmp world writeable (chmod 777)
* Extract /usr/bin/uclited from the device via ssh and apply the binary
  patch listed below. The patch is required to prevent `uclited -u` in
  the last step from crashing.
* Copy the patched uclited programme back to the device at /tmp/uclited
  (via ssh)
* Upload the factory image to /tmp/upgrade.bin (via ssh)
* Run `chmod +x /tmp/uclited && /tmp/uclited -u` to install OpenWrt.

    --- xxd uclited
    +++ xxd uclited-patched
    @@ -53796,7 +53796,7 @@
     000d2240: 8c44 0000 0320 f809 0000 0000 8fbc 0010  .D... ..........
     000d2250: 8fa6 0a4c 02c0 2821 8f82 87b8 0000 0000  ...L..(!........
    -000d2260: 8c44 0000 0c13 45e0 27a7 0018 8fbc 0010  .D....E.'.......
    +000d2260: 8c44 0000 2402 0000 0000 0000 8fbc 0010  .D..$...........
     000d2270: 1040 001d 0000 1821 8f99 8374 3c04 0058  .@.....!...t<..X
     000d2280: 3c05 0056 2484 a898 24a5 9a30 0320 f809  <..V$...$..0. ..

Debricking:
* Serial port can be soldered on PCB J3 (1: TXD, 2: RXD, 3: GND, 4: VCC)
    * Bridge unpopulated resistors R225 (TXD) and R237 (RXD).
      Do NOT bridge R230.
    * Use 3.3V, 115200 baud, 8n1
* Interrupt bootloader by holding CTRL+B during boot
* tftp initramfs to flash via the LuCI web interface
    setenv ipaddr 192.168.1.1 # default, change as required
    setenv serverip 192.168.1.10 # default, change as required
    tftp 0x80800000 initramfs.bin
    bootelf $fileaddr

Tested on the EAP245 v1 running the latest firmware (v1.4.0). The binary
patch might not apply to uclited from other firmware versions.

EAP245 v1 device support was originally developed and maintained by
Julien Dusser out-of-tree. This patch and "ath79: prepare for 1-port
TP-Link EAP2x5 devices" are based on that work.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2020-11-23 22:53:15 +01:00
Sander Vanheule
7a875d155e ath79: prepare for 1-port TP-Link EAP2x5 devices
TP-Link has developed a number of access points based on the AP152
reference board. In the EAP-series of 802.11ac access points, this
includes the following devices with one ethernet port:
* EAP225 v1/v2
* EAP225 v3
* EAP225-Outdoor v1
* EAP245 v1

Since the only differences between these devices are the ath10k wireless
radios and LEDs, a common base is provided for the overlapping support
requirements.

Hardware commonalities:
* SoC: QCA9563-AL3A MIPS 74kc v5.0 @ 775MHz, AHB @ 258MHz
* RAM: 128MiB DDR2 @ 650MHz
* Flash: 16MiB SPI NOR
* Wi-Fi 2.4GHz: provided by SoC
* Wi-Fi 5Ghz: ath10k chip on PCIe
* Ethernet: AR8033-AL1A, one 1GbE port (802.3at PoE)

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2020-11-23 22:53:15 +01:00
Julien Dusser
87627b2d76 ath79: add QCA956x SERDES init workaround
This commit add a workaround for non working SGMII link observed on some
QCA956x SoCs. The workaround originates part from the U-Boot source code
from QCA, part from the implementation from TP-Link found in the GPL
tarball for the EAP245v1.

Extends commit 0d416a8d3b for QCA956x.
Note that reset is the same on QCA955x and QCA956x, same register offset
and values.

Auto calibration is done on u-boot, but always fall back to default value
0x7. Add a DTS entry serdes-cal in case a device require another value.

Signed-off-by: Julien Dusser <julien.dusser@free.fr>
[Sander Vanheule:
    Minor code style fixes,
    Remove hunk adding qca956x-serdes-fixup to a missing DTS,
    Remove variable err that was only assigned,
    Rename function to sgmii_serdes_init,
    Lower priority of serdes call message to pr_debug]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2020-11-23 22:53:15 +01:00
Sander Vanheule
8dd2a1715b ath79: ensure QCA956x gmac0 mux selects sgmii
Some bootloaders do not set up gmac0 properly, leaving it disconnected
from the sgmii interface. If the user specificies phy-mode sgmii, then
use the gmac-config/device node to ensure the mux is configured
correctly.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2020-11-23 22:53:15 +01:00
Vladimir Vid
c0af4a0ca2 mvebu: add initial support for Globalscale ESPRESSObin-Ultra
This patch adds support for Globalscale ESPRESSObin-Ultra. Device uses
the same Armada-3720 SoC with extended hardware support.

- SoC: Armada-3720
- RAM: 1 GB DDR4
- Flash: 4MB SPI NOR (mx25u3235f) + 8 GB eMMC
- Ethernet: Topaz 6341 88e6341 (4x GB LAN + 1x WAN with 30W PoE)
- WiFI: 2x2 802.11ac Wi-Fi marvell (88w8997 PCIe+USB)
- 1x USB 2.0 port
- 1x USB 3.0 port
- 1x microSD slot
- 1x mini-PCIe slot (USB [with nano-sim slot])
- 1x mini-USB debug UART
- 1x RTC Clock and battery
- 1x reset button
- 1x power button
- 4x LED (RGBY)
- Optional 1x M.2 2280 slot

** Installation **

Copy dtb from build_dir to bin/ and run tftpserver there:
$ cp ./build_dir/target-aarch64_cortex-a53_musl/linux-mvebu_cortexa53/
linux-5.4.65/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dtb
bin/targets/mvebu/cortexa53/
$ in.tftpd -L -s bin/targets/mvebu/cortexa53/

Connect to the device UART via microUSB port on the back side and power on the device.

Power on the device and hit any key to stop the autoboot.

Set serverip (host IP) and ipaddr (any free IP address on the same subnet), e.g:
$ setenv serverip 192.168.1.10 # Host
$ setenv ipaddr 192.168.1.15 # Device

Ping server to confirm network is working:
$ ping $serverip
Using neta@30000 device
host 192.168.1.15 is alive

Tftpboot the firmware:
$ tftpboot $kernel_addr_r openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-initramfs-kernel.bin
$ tftpboot $fdt_addr_r armada-3720-espressobin-ultra.dtb

Set the console and boot the image:
$ setenv bootargs $console
$ booti $kernel_addr_r - $fdt_addr_r

Once the initramfs is booted, transfer openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz
to /tmp dir on the device.

Gunzip and dd the image:
$ gunzip /tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz
$ dd if=/tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img of=/dev/mmcblk0 && sync

Reboot the device.

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
2020-11-23 22:53:15 +01:00
Leon M. George
651f0c0999 hostapd: fix patch offset
Fixes the offset of the patch added in 93bbd998aa
  ("hostapd: enter DFS state if no available channel is found").

Signed-off-by: Leon M. George <leon@georgemail.eu>
2020-11-23 22:53:15 +01:00
Pawel Dembicki
cdff729b27 layerscape: enable spi-uart in LS1012A-FRDM
This patch add missing support of SC16IS740 serial controller, installed
on LS1012A-FRDM board.

It was required to change RCW bits, because SPI was disabled by default.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-11-23 22:53:15 +01:00
Pawel Dembicki
4dc27a026b layerscape: add i2c peripherials on LS1012A-RDB
LS1012A-RDB equipped in some i2c devices:
  - 3x GPIO Expander: PCAL9555A (NXP)
  - Gyro: FXAS21002 (NXP)
  - Accelerometer: FXOS8700 (NXP)
  - Current & Power Monitor: INA220 (TI)

This patch enables i2c peripherials installed on LS1012A-RDB.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-11-23 22:53:15 +01:00
Pawel Dembicki
a1158b3170 kernel: iio: add fxas21002c driver support
This patch adds kernel modules for Freescale FXAS21002C 3-axis gyro driver.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-11-23 22:53:15 +01:00
Pawel Dembicki
65f8d7360c layerscape: make initramfs kernel fit packed
This will make developing process easier, because dtb will be included
into image.
Not need to enable initramfs image by default.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-11-23 22:53:15 +01:00
René van Dorst
6e1a4496f5 ramips: phy: at803x: Select SFP interface mode that both sides supports.
Currently sfp_select_interface() return the fastest interface that
the sfp modules supports even if the phy don't support that mode.

For example an GPON module that support both 2500basex and 1000basex.
Currently sfp_select_interface() picks 2500basex instead of 1000basex.

So limit the interfaces which both sides supports before calling
sfp_select_interface() or return an error if we don't have match.

Reviewed-by: John Thomson <git@johnthomson.fastmail.com.au>
Tested-by: Braihan Cantera <bcanterac@gmail.com> [MikroTik RB760iGS + Nokia G-010S-A 3FE46541AA SFP]
Tested-by: John Thomson <git@johnthomson.fastmail.com.au> [Mikrotik rb760igs + SFP SM/LC, SFP base1000T, SFP+ passive DAC]
Signed-off-by: René van Dorst <opensource@vdorst.com>
2020-11-23 22:53:15 +01:00
John Audia
991e6f8ccc linux-firmware: update to 20201118
git log --pretty=oneline --abbrev-commit 20201022..20201118
2ea8667 (tag: 20201118) rtlwifi: v88.2 firmware files for RTL8192CU
e850cf3 Merge https://github.com/rjliao-qca/qca-btfw into main
65370db rtw88: RTL8822C: Update firmware to v9.9.4
e371b7c Revert "rtw88: RTL8822C: Update firmware to v9.9.4"
51d2c81 vpdma: Move firmware to ti directory
d7a24c9 Merge branch 'master' of https://github.com/shahasit/video-linux-firmware into main
9ee1543 Merge branch 'master' of https://github.com/shahasit/bt-linux-firmware into main
3bcc4c1 amdgpu: update picasso VCN firmware
b6b4542 amdgpu: update raven2 VCN firmware
79aa335 amdgpu: update raven VCN firmware
c93834e rtw88: RTL8822C: Update firmware to v9.9.4
3ef6c93 rtl_bt: Update RTL8822C BT(USB I/F) FW to 0x099A_281A
b503c96 Merge branch 'ath10k-20201023' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware into main
463fdea QCA: Update Bluetooth firmware for QCA6390
8a46c32 qcom : updated venus firmware files for v5.4
d7793e5 QCA : Fixed BT SSR due to command timeout / IO fatal error
d842d8c ath11k: QCA6390 hw2.0: add to WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
8fb1a6e ath11k: QCA6390 hw2.0: add board-2.bin
34cb5fc ath11k: IPQ8074 hw2.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
c0a8efd ath11k: IPQ8074 hw2.0: add board-2.bin
ac7f5e9 ath11k: IPQ6018 hw1.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
2594e51 ath11k: IPQ6018 hw1.0: add board-2.bin
d8f10d4 ath10k: QCA6174 hw3.0: add firmware-sdio-6.bin version WLAN.RMH.4.4.1-00077
6652297 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00131
36059aa ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00131
1e5629d ath10k: QCA6174 hw3.0: update board-2.bin
e315d1a ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00157-QCARMSWPZ-1

Signed-off-by: John Audia <graysky@archlinux.us>
2020-11-23 22:53:15 +01:00
Sven Eckelmann
223eec7e81 kernel: mtd: parser: cmdline: Fix parsing of part-names with colons
Some devices (especially QCA ones) are already using hardcoded partition
names with colons in it. The OpenMesh A62 for example provides following
mtd relevant information via cmdline:

  root=31:11 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(custom),64k(0:KEYS),0x002b0000(kernel),0x00c80000(rootfs),15552k(inactive) rootfsname=rootfs rootwait

The change to split only on the last colon between mtd-id and partitions
will cause newpart to see following string for the first partition:

  KEYS),0x002b0000(kernel),0x00c80000(rootfs),15552k(inactive)

Such a partition list cannot be parsed and thus the device fails to boot.

Avoid this behavior by making sure that the start of the first part-name
("(") will also be the last byte the mtd-id split algorithm is using for
its colon search.

Fixes: d6a9a92e32 ("kernel: bump 5.4 to 5.4.69")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-11-23 22:53:15 +01:00
Sven Eckelmann
8231994d3f ipq40xx: DTS style updates for OpenMesh devices
The OpenMesh related files were not updated since a while and the new
coding style requirements weren't integrated. This can cause problems
for new devices when an author uses these files as starting point.

* use SPDX-License-Identifiers instead of full license texts
* drop linux,default-trigger with value default-off for LEDs
* led nodes with label "abc:xyz" should have name "xyz_abc"
* led DT labels for "xyz_abc" should be "led_xyz_abc"
* "m25p80@0" flash node should be renamed to "flash@0"
* drop unnecessary empty lines

Signed-off-by: Sven Eckelmann <sven@narfation.org>
[minor commit title and message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-23 13:44:47 +01:00
Rui Salvaterra
eb087ae4f4 ath79: move the squashfs feature to the parent target
All subtargets define it. Move it to the parent target and remove
it from all subtargets.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2020-11-23 13:20:53 +01:00
Felix Fietkau
4799810745 netifd: update to the latest version
213748a9bcd9 system-linux: implement full device present state management for force-external devices
3abe1fc87151 system-linux: add retry for adding member devices to a bridge

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-23 12:52:11 +01:00
Paulo Machado
b19a684f46 imagebuilder: fix main entry makefile
Remove a syntax error from ImageBuider Makefile

Acked-by: Paul Spooren <mail@aparcar.org>
Signed-off-by: Paulo Machado <pffmachado@yahoo.com>
2020-11-23 03:13:46 +00:00
Rui Salvaterra
dd4e6a70f2 hostapd: enable the epoll-based event loop
Hostapd supports epoll() since 2014. Let's enable it for better performance.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2020-11-23 03:02:21 +00:00
Daniel Golle
97ac290090 uhttpd: update to git HEAD
f53a639 ubus: fix uhttpd crash

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-11-23 02:06:35 +00:00
Filip Moc
0d65177658 ramips: add support for TP-Link MR6400 v4
You can flash via tftp recovery:
 - serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24
 - connect to any ethernet port
 - power on the device while holding the reset button
 - wait at least 8 seconds before releasing reset button

Flashing via OEM web interface does not work.

LTE module does not support DHCP so it must be configured via QMI.

Hardware Specification (v4.0 EU):
 - SoC: MT7628NN
 - Flash: Winbond W25Q64JVS (8MiB)
 - RAM: ESMT M14D5121632A (64MiB)
 - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna)
 - Ethernet: 1NIC (4x100M)
 - WWAN: TP-LINK LTE MODULE (2x external detachable antenna)
 - Power: DC 9V 0.85A

Signed-off-by: Filip Moc <lede@moc6.cz>
2020-11-23 00:46:40 +00:00
Filip Moc
1e69106e34 generic: add DTR quirk patch for MR400 LTE
This is required for LTE module MR400 in TL-MR6400 v4.

Signed-off-by: Filip Moc <lede@moc6.cz>
2020-11-23 00:45:44 +00:00
Daniel Golle
2eb0d711a4 procd: update to git HEAD
d4d78db uxc: also delete procd runtime state on 'delete'
 e935c0c jail: add 'debug' extern variable to preload_seccomp

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-11-23 00:32:48 +00:00
Daniel Golle
e065c9184c uqmi: update to git HEAD
65796a6 nas: add --get-plmn
 0a19b5b uqmi: add timeout parameter

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-11-22 21:58:22 +00:00
Filip Moc
ce293cd3ac uqmi: set device-operating-mode to online
This is required for LTE module MR400 (in TL-MR6400 v4).
Otherwise LTE module won't register to GSM network.

Signed-off-by: Filip Moc <lede@moc6.cz>
2020-11-22 21:14:09 +00:00
Filip Moc
9ebbb55113 uqmi: add support for IPv4 autoconf from QMI
There already was an option for autoconfiguring IPv4 from QMI but this
was removed by commit 3b9b963e6e ("uqmi: always use DHCP for IPv4").

DHCP does not work on MR400 LTE module (in TL-MR6400 v4) so let's readd
support for IPv4 autoconf from QMI but this time allow to configure this
for IPv4 and IPv6 independently and keep DHCP default on IPv4.

Signed-off-by: Filip Moc <lede@moc6.cz>
2020-11-22 21:13:39 +00:00
Thomas Richard
2b3a0cabea uqmi: wait forever registration if timeout set to 0
Give possibility to wait forever the registration by setting timeout
option to 0.

No timeout can be useful if the interface starts whereas no network is
available, because at the end of timeout the interface will be stopped
and never restarted.

Signed-off-by: Thomas Richard <thomas.richard@kontron.com>
2020-11-22 21:13:18 +00:00
Daniel Golle
6e9b707ee2 Revert "refpolicy: add variant that builds modular policy"
This reverts commit 9eb9943f82.
Building the 'modular' variant requires 'semodule_package' from
'selinux-python' to be installed on the buildhost.
Apart from that, this change also broke the monolithic refpolicy
'targeted' build.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-11-22 15:20:35 +00:00
Daniel Golle
8262c99fc3 procd: update to git HEAD
04a2edd uxc: make force-delete kill container process
 be6da62 seccomp: silence 'unknown syscall' warnings
 b22e625 jail: cgroup hack: rewrite cgroup -> cgroup2
 df7fa7b uxc: fix incomplete commit

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-11-22 03:24:33 +00:00
Hannu Nyman
39fa0c0959 tools/mpc: update to 1.2.1
Update mpc to 1.2.1

http://www.multiprecision.org/mpc/
  Bug fixes:
    Fix an incompatibility problem with GMP 6.0 and before.
    Fix an intermediate overflow in asin.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-11-21 18:49:27 +01:00
Hannu Nyman
c977bd033e tools/gmp: update to 6.2.1
Update gmp to 6.2.1

Release notes: https://gmplib.org/gmp6.2

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-11-21 18:49:17 +01:00
Hannu Nyman
9d5eceae91 tools/bison: update to 3.7.4
Update bison to 3.7.4

Release notes:
http://git.savannah.gnu.org/cgit/bison.git/tree/NEWS?id=7a11a9308cb

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-11-21 18:49:08 +01:00
Hannu Nyman
7d03e90390 tools/cmake: update to 3.18.5
Update cmake to 3.18.5

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-11-21 18:48:59 +01:00
Hannu Nyman
a233e3a9af tools/expat: update to 2.2.10
Update expat to 2.2.10

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-11-21 18:48:39 +01:00
Felix Fietkau
5242bf7cf7 netifd: update to the latest version
351d690f1a09 wireless: fix passing bridge name for vlan hotplug pass-through
c1c2728946b5 config: initialize bridge and bridge vlans before other devices
5e18d5b9ccb1 interface: do not force link-ext hotplug interfaces to present by default
4544f026bb09 bridge-vlan: add support for defining aliases for vlan ids

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-11-21 10:24:37 +01:00
Petr Štetiar
4d4ef1058c musl: handle wcsnrtombs destination buffer overflow (CVE-2020-28928)
The wcsnrtombs function in all musl libc versions up through 1.2.1 has
been found to have multiple bugs in handling of destination buffer
size when limiting the input character count, which can lead to
infinite loop with no forward progress (no overflow) or writing past
the end of the destination buffera.

This function is not used internally in musl and is not widely used,
but does appear in some applications. The non-input-limiting form
wcsrtombs is not affected.

All users of musl 1.2.1 and prior versions should apply the attached
patch, which replaces the overly complex and erroneous implementation.
The upcoming 1.2.2 release will adopt this new implementation.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-20 13:24:48 +01:00
David Bauer
d369993898 scripts: download.pl: retry download using filename
With this commit, the download script will try downloading source files
using the filename instead of the url-filename in case the previous
download attempt using the url-filename failed.

This is required, as the OpenWrt sources mirrors serve files using the
filename files might be renamed to after downloading. If the original
mirror for a file where url-filename and filename do not match goes
down, the download failed prior to this patch.

Further improvement can be done by performing this only for the
OpenWrt sources mirrors.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-11-20 02:35:43 +01:00