Commit Graph

1569 Commits

Author SHA1 Message Date
Daniel Engberg
0ffb7b02ba tools/libressl: Update to 3.0.2
Update libressl to 3.0.2 and remove 010-avoid-glibc.patch as fix is added by upstream

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2020-02-18 21:38:51 +01:00
Dan Haab
9aa6569aa6 firmware-utils: add lxlfw tool for generating Luxul firmwares
It's a simple tool prepending image with a Luxul header.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
2020-02-07 09:31:22 +01:00
Andreas Böhler
6d6f36ae78 ramips: add support for TP-Link RE200 v2
TP-Link RE200 v2 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN.

Specifications
--------------

- MediaTek MT7628AN (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
- UART header on PCB (57600 8n1)
- 8x LED (GPIO-controlled), 2x button

There are 2.4G and 5G LEDs in red and green which are controlled
separately.

MAC addresses
-------------

The MAC address assignment matches stock firmware, i.e.:
LAN : *:0D
2.4G: *:0E
5G  : *:0F

Installation
------------

Web Interface
-------------

It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.

Serial console
--------------

Opening the case is quite hard, since it is welded together. Rename the
OpenWrt factory image to "test.bin", then plug in the device and quickly
press "2" to enter flash mode (no line feed). Follow the prompts until
OpenWrt is installed.

Unfortunately, this devices does not offer a recovery mode or a tftp
installation method. If the web interface upgrade fails, you have to open
your device and attach serial console.

Additonal notes
---------------

It is possible to flash back to stock by using tplink-safeloader to create
a sysupgrade image based on a stock update. After the first boot, it is
necessary upgrade to another stock image, otherwise subsequent boots
fail with LZMA ERROR 1 and you have to attach serial to recover the device.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
[remove DEVICE_VARS change]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-01 19:41:51 +01:00
Hannu Nyman
b77ce0c720 tools/gmp: update to 6.2.0
Update GNU gmp to version 6.2.0

Release notes:  https://gmplib.org/gmp6.2.html

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-01-25 22:07:32 +01:00
Adrian Schmutzler
b2102be8a5 ar71xx: use dynamic partitioning for TP-Link TL-WA850RE v2
This moves the TP-Link TL-WA850RE v2 to dynamic partitioning and
will allow to use this for ath79 as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-22 23:52:51 +01:00
Hannu Nyman
96e9d48664 tools/bison: update to 3.5
Update bison to 3.5

Release notes:
https://lists.gnu.org/archive/html/info-gnu/2019-12/msg00002.html

Note for future: release notes mention that YYPRINT macro is
declared deprecated, but apparently still works for now. I found
one possible use of that in scripts/config/zconf.tab.c_shipped
That might be modernized at some point, but as the file is synced
with the one from upstream Linux, it might get fixed there.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-01-21 18:43:58 +01:00
Anderson Vulczak
7a8bfbf0ff tools: tplink-safeloader: update soft_ver for TP-Link Archer C6 v2 (EU)
This patch updates "soft_ver" for TP-Link Archer C6 v2 (EU).

It makes possible to upload OpenWrt on lastest vendor's firmware
as the web-based updater checks for major.minor version during upload.

Due to that on next major/minor version update TP-Link will stop
us from using the web-based firmware update tool, so it will
require a new patch on soft_ver to match major and minor version.
Up to today's latest stock firmware the patch (major.minor.patch)
version does not matters, that allows downgrade from 1.1.4 to 1.1.1
but do not allow downgrade from 1.1.X to 1.0.X.

Signed-off-by: Anderson Vulczak <andi@andi.com.br>
2020-01-19 00:19:39 +01:00
Steffen Förster
93a4c8afbf ramips: add support for TP-Link RE305 v1
Specification:

SoC: MediaTek MT7628AN
RAM: 64MiB
Flash: 8MiB
Wifi:
  - 2.4GHz: MT7628AN
  - 5GHz: MT7612EN
LAN: 1x 10/100 Mbps

Flash instructions:
Flash factory image through stock firmware WEB UI.
Back to stock is possible by using TFTP and stripping down the Firmware
provided by TP-Link to a initramfs.

The flash space between 0x650000 and 0x7f0000
is blank in the stock firmware so I left it out as well.

Signed-off-by: Steffen Förster <nemesis@chemnitz.freifunk.net>
2020-01-18 19:39:05 +01:00
Hannu Nyman
343f27f8b0 tools/cmake: update to 3.16.2
Update cmake to 3.16.2 and refresh patches.

Release notes:
https://cmake.org/cmake/help/v3.16/release/3.16.html

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2020-01-18 14:18:22 +01:00
DENG Qingfang
5355baf21f ccache: update to 3.7.7
Update ccache to 3.7.7

Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_7

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-01-16 18:59:42 +01:00
Andrea Dalla Costa
3c77e4ae4d wrt350nv2-builder: Fix memory leak
Add missing call to `free` for variable `buffer` in function
`create_bin_file`.

Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
2020-01-14 17:48:50 +01:00
Andrea Dalla Costa
8057970d2a firmware-utils/mktitanimg: fix possible resource leak
Add missing call to `fclose` for file pointer `nsp_image`.

Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
2020-01-14 17:48:50 +01:00
Andrea Dalla Costa
1775f690d5 firmware-utils/mksenaofw: fix possible memory leak
Add missing calls to `free` for variable `pmodel`.

Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
2020-01-14 17:48:50 +01:00
Andrea Dalla Costa
b886d3c8f3 firmware-utils/mkfwimage: fix possible memory and resource leak
Add missing calls to `free` for variable `mem`.
Add missing call to `fclose` for variable `f`.

The same changes were made in both `mkfwimage.c` and `mkfwimage2.c`.

Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
2020-01-14 17:48:50 +01:00
Andrea Dalla Costa
8e3b3152e5 firmware-utils/mkchkimg: fix possible resource leaks
Add missing `fclose` calls for file pointers `kern_fp`, `fs_fp`
and `out_fp`.
Not closing files could lead to resource leaks.

Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
2020-01-14 17:48:50 +01:00
Andrea Dalla Costa
0ae0f48cec firmware-utils: fix possible memory leak and resource leak
Add missing calls to `free` for variable `buffer`.
This could lead to a memory leak.

Add missing call to `close` for file pointer `fdin`.
This could lead to a resource leak.

Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
2020-01-14 17:48:50 +01:00
Andrea Dalla Costa
402b362db4 firmware-utils/dgfirmare: fix possible resource leak
Add missing calls to `fclose` in functions `write_img`, `write_rootfs`
and `write_kernel`.
The not-closed files could lead to resource leaks.

Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
2020-01-14 17:48:50 +01:00
Tobias Schramm
d29929be07 firmware-utils: mkfwimage: add support for Ubiquiti SW devices
This commit adds support for Ubiquiti ToughSwitch XP (and probably also
EdgeSwitch XP) devices. They are mostly based on the same hardware as
MX devices.

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
2020-01-12 14:12:50 +01:00
Hauke Mehrtens
271d0c825b make_ext4fs: Update to version 2020-01-05
5c201be Add LDFLAGS when building libsparse.a
ec17045 make_ext4fs: fix build on musl systems

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-01-05 20:04:37 +01:00
Andreas Böhler
a3010a7f8d ramips: add support for TP-Link RE200 v1
TP-Link RE200 v1 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7620A+MT7610EN.

Specifications
--------------

- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
- UART header on PCB (57600 8n1)
- 8x LED (GPIO-controlled; only 6 supported), 2x button

There are 2.4G and 5G LEDs in red and green which are controlled
separately. The 5G LED is currently not supported, since the GPIOs couldn't
be determined.

Installation
------------

Web Interface
-------------

It is possible to upgrade to OpenWrt via the web interface. However, the
OEM firmware upgrade file is required and a tool to fix the MD5 sum of
the header. This procedure overwrites U-Boot and there is not failsafe /
recovery mode present! To prepare an image, you need to take the header
and U-Boot (i.e. 0x200 + 0x20000 bytes) from an OEM firmware file and
attach the factory image to it. Then fix the header MD5Sum1.

Serial console
--------------

Opening the case is quite hard, since it is welded together. Rename the
OpenWrt factory image to "test.bin", then plug in the device and quickly
press "2" to enter flash mode (no line feed). Follow the prompts until
OpenWrt is installed.

Unfortunately, this devices does not offer a recovery mode or a tftp
installation method. If the web interface upgrade fails, you have to open
your device and attach serial console. Since the web upgrade overwrites
the boot loader, you might also brick your device.

Additional notes
----------------

MAC address assignment is based on stock-firmware. For me, the device
assigns the MAC on the label to Ethernet and the 2.4G WiFi, while the 5G
WiFi has a separate MAC with +2.

*:88    Ethernet/2.4G    label, uboot 0x1fc00, userconfig 0x0158
*:89    unused           userconfig 0x0160
*:8A    5G               not present in flash

This seems to be the first ramips device with a TP-Link v1 header. The
original firmware has the string "EU" embedded, there might be some region-
checking going on during the firmware upgrade process. The original
firmware also contains U-Boot and thus overwrites the boot loader during
upgrade.
In order to flash back to stock, the first header and U-Boot need to be
stripped from the original firmware.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
2019-12-31 13:23:55 +01:00
Christian Mauderer
5e5e92b7c3 ath79: generate firmware image for aircube-isp
This adds a "factory" image for the aircube-isp devices. Note that the
firmware can't be uploaded without prior special preparation. For the
most recent instructions on how to do that, visit the OpenWRT wiki page
of the Ubiquiti airCube ISP for details:

https://openwrt.org/toh/ubiquiti/ubiquiti_aircube_isp

Current procedure:

With the original firmware 2.5.0 it is possible to upload and execute a
script via the configuration. To do that download and unpack the
original configuration, adapt uhttpd config to execute another lua
handler (placed in the config directory) and pack and upload it again.

The lua handler can call a script that mounts an overlayfs and modifies
the "fwupdate.real" binary so that an unsigned image is accepted. The
overlayfs is necessary because a security system (called tomoyo) doesn't
allow binaries in other locations than /sbin/fwupdate.real (and maybe
some more) to access the flash when executed via network.

A big thanks to Torvald Menningen (Snap) from the OpenWRT forum for
finding out how to patch the binary so that it accepts an unsigned
image.

The current step-by-step procedure is:

- Use a version 2.5.0 of the original firmware. This is important
  because a binary file will be modified.
- Download a configuration.
- Unpack it (it's just a tar gz file without an ending).
- Add the following to uhttpd:

``````
config 'uhttpd' 'other'
	list listen_http    0.0.0.0:8080
	list listen_http    [::]:8080
	option 'home'       '/tmp/persistent/config/patch/www'
	option lua_prefix   '/lua'
	option lua_handler  '/tmp/persistent/config/patch/handler.lua'
``````

- Create a `patch` subfolder.
- Create a `patch/www` subfolder.
- Create a `patch/handler.lua` with the following content:

``````
function handle_request(env)
    uhttpd.send("Status: 200 OK\r\n")
    uhttpd.send("Content-Type: text/plain\r\n\r\n")

    local command = "/bin/sh /tmp/persistent/config/patch/patch.sh 2>&1"

    local proc = assert(io.popen(command))
    for line in proc:lines() do
        uhttpd.send(line.."\r\n")
    end
    proc:close()
end
``````

- Create a `patch/patch.sh` with the following content:

``````
#!/bin/sh -x

set -e
set -u
set -x

UBNTBOX_PATCHED="/tmp/fwupdate.real"
MD5FILE="/tmp/patchmd5"

cat <<EOF > ${MD5FILE}
c33235322da5baca5a7b237c09bc8df1  /sbin/fwupdate.real
EOF

# check md5 of files that will be patched
if ! md5sum -c ${MD5FILE}
then
        echo "******** Error when checking files. Refuse to do anything. ********"
        exit 0
fi

# prepare some overlay functionality
LOWERDIR="/tmp/lower_root"
mkdir -p ${LOWERDIR}
mount -t squashfs -oro /dev/mtdblock3 ${LOWERDIR}
overlay_some_path()
{
        PATH_TO_OVERLAY=$1
        ALIAS=$2
        UPPERDIR="/tmp/over_${ALIAS}"
        WORKDIR="/tmp/over_${ALIAS}_work"

        mkdir -p ${UPPERDIR}
        mkdir -p ${WORKDIR}

        mount -t overlay -o lowerdir=${LOWERDIR}${PATH_TO_OVERLAY},upperdir=${UPPERDIR},workdir=${WORKDIR} overlay ${PATH_TO_OVERLAY}
}

# patch the ubntbox binary.
overlay_some_path "/sbin" "sbin"
echo -en '\x10' | dd of=/sbin/fwupdate.real conv=notrunc bs=1 count=1 seek=24598

echo "******** Done ********"
``````

- Repack the configuration.
- Upload it via the normal web interface.
- Wait about a minute. The webserver should restart.
- Now there is a second web server at port 8080 which can call the lua
  script. Visit the page with a web browser. Link is for example
  http://192.168.1.1:8080/lua
- You should see the output of the script with a "*** Done ***" at the
  end. Note that the patches are not permanent. If you restart the
  router you have to re-visit the link (but not re-upload the config).
- Now you can upload an unsigned binary via the normal web interface.

Signed-off-by: Christian Mauderer <oss@c-mauderer.de>
2019-12-31 01:42:13 +01:00
Brett Mastbergen
9e2e48ff31 tools: qemu: Add patches to support adapter_type and monolithicFlat
Its way more trouble to update this to a newer version of qemu than it
is to backport the two additional features we need.

Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
2019-12-23 00:22:06 +01:00
Adrian Schmutzler
c0b87cf10b tools: tplink-safeloader: fix whitespace issues
This replaces tabs by spaces when preceding an equal sign. This improves
consistency in the file and makes the indent look correct on all platforms.

While at it, also fix one case of inconsistent leading spaces.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-11-27 22:54:36 +01:00
Anderson Vulczak
9b90dc05f5 ath79: add support for TP-Link Archer C6 v2 (US) and A6 (US/TW)
This patch is based on #1689 and adds support for TP-Link Archer
C6 v2 (US) and A6 (US/TW).

The hardware is the same as EU and RU variant, except for GPIOs
(LEDS/Buttons), flash(chip/partitions) and UART being available
on the board.

- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q127CS1G (16MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: 115200, 8n1 (header available on board)

Known issues:
 - Wireless: 5GHz is known to have lower RSSI signal, it affects speed and range.

Flash instructions:

Upload openwrt-ath79-generic-tplink_archer-c6-v2-us-squashfs-factory.bin
via the router Web interface.

Flash instruction using tftp recovery:

1. Connect the computer to one of the LAN ports of the router
2. Set the computer IP to 192.168.0.66
3. Start a tftp server with the OpenWrt factory image in the
   tftp root directory renamed to ArcherA6v2_tp_recovery.bin.
4. Connect power cable to router, press and hold the
   reset button and turn the router on
5. Keep the reset button pressed until the WPS LED lights up
6. Wait ~150 seconds to complete flashing

Flash partitioning: I've followed #1689 for defining the partition layout
for this patch. The partition named as "tplink" @ 0xfd0000 is marked
as read only as it is where some config for stock firmware are stored.
On stock firmware those stock partitions starts at 0xfd9400 however
I had not been able to make it functional starting on the same address as
on stock fw, so it has been partitioned following #1689 and not the stock
partition layout for this specific partition. Due to that firmware/rootfs
partition lenght is 0xf80000 and not 0xf89400 as stock.

According to the GPL code, the EU/RU/JP variant does have different GPIO pins
assignment to LEDs and buttons, also the flash memory layout is different.

GPL Source Code: https://static.tp-link.com/resources/gpl/gpl-A6v2_us.tar.gz

Signed-off-by: Anderson Vulczak <andi@andi.com.br>
[wrap commit message, remove soft_ver change for C6 v2 EU, move LED aliases
to DTS files, remove dts-v1 in DTSI, node/property reorder in DTSI]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-11-27 22:54:36 +01:00
David Bauer
c5497ebb1c tools/expat: change package source to GitHub
According to the SourceForge page, the project is migrating to GitHub.
Thus, change the source of the package to GitHub.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-24 23:17:34 +01:00
DENG Qingfang
3f5cf3872d ccache: update to 3.7.6
Update ccache to 3.7.6

Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_6

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-11-24 21:48:54 +01:00
Hannu Nyman
7c8f74c7c0 tools/quilt: update to 0.66
Update quilt to version 0.66

Release notes at:
http://git.savannah.nongnu.org/cgit/quilt.git/tree/NEWS?id=294006e12

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2019-11-24 21:35:45 +01:00
Bernhard Geier
591a06316d tplink-safeloader: shorten version number of TP-Link WBS210 v2
"2.0" instead of "2.00" is sufficient and more in line with the
other definitions.

Signed-off-by: Bernhard Geier <freifunk@geierb.de>
[commit message/title adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-11-23 12:03:42 +01:00
Andrew Cameron
20fdfe37d2 ath79: add support for the TP-LINK WBS510 V1
This adds support for a popular low-cost 5GHz N based AP

Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
2019-11-22 11:41:27 +01:00
Andrew Cameron
5b8709d9f2 ath79: add support for the TP-LINK WBS510 V2
This adds support for a popular low-cost 5GHz N based AP

Specifications:
 - SoC: Atheros AR9344
 - RAM: 64MB
 - Storage: 8 MB SPI NOR
 - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
 - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
2019-11-22 11:41:24 +01:00
Andrew Cameron
bae0d47f2e ath79: add support for the TP-LINK CPE220 V3
This adds support for a popular low-cost 2.4GHz N based AP

Specifications:
SoC: Qualcomm Atheros QCA9533 (650MHz)
RAM: 64MB
Storage: 8 MB SPI NOR
Wireless: 2.4GHz N based built into SoC 2x2
Ethernet: 2x 100/10 Mbps, integrated into SoC

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

This also applies some minor changes to the common DTSI:
- use &wmac for label-mac-device, as this one is actually set up in
  common DTSI
- move &eth0 to parent DTSI
- fix several leading spaces, added/removed newlines

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[DTS style fixes/improvements, updated commit message/title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-11-06 13:37:40 +01:00
Fredrik Olofsson
e6901bf902 tools/automake: Revert "Do not use $(V) - force AM_V=1"
This reverts commit 43365ca662 ("Do not use $(V) - force AM_V=1") as
it breaks verbose output in automake packages, deviating from the
upstream and expected behaviour.

As you can see, neither make command outputs the expected verbose
compile command lines:

```
$ make package/mtd-utils/{clean,compile} V=sc
...
  CCLD     lsmtd
  CC       nand-utils/nanddump.o
  CCLD     nanddump
...
```
```
$ make -C build_dir/target*/mtd-utils-2.1.1 clean
...
$ make -C build_dir/target*/mtd-utils-2.1.1 V=1
...
  CC       lib/libmtd.o
  CC       lib/libfec.o
  CC       lib/common.o
  CC       lib/libcrc32.o
```

The original reason for this commit was some packages failing to build
if V is set to something other than 0 or 1. See the discussion in PR
https://github.com/openwrt/openwrt/pull/2481 for how to fix this in the
package Makefile.

Ref: PR#2481
Acked-by: Mirko Vogt <mirko-openwrt@nanl.de>
Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
[commit title/description facelift]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-11-06 00:21:15 +01:00
Bernhard Geier
3930aab2cb ath79: add support for TP-Link WBS210 v2
TP-Link WBS210 v2 is an outdoor wireless CPE for 2.4 GHz with
two Ethernet ports based on Atheros AR9344

The device is the same as TP-Link CPE220 v2, but with higher TX power (27 dBm
instead of 12 dBm) and two antenna connectors instead of built-in antennas.

Specifications:
 - SoC: Atheros AR9344
 - RAM: 64MB
 - Storage: 8 MB SPI NOR
 - Wireless: 2.4GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
 - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP: 192.168.0.100
Stock device TFTP adress: 192.168.0.254

The TP-Link WBS devices use the same GPIOs as the CPE devices,
except for the link4 LED. For this one, WBS devices use "2", while
CPE devices use "16". (Tested on WBS210 v2)

Signed-off-by: Bernhard Geier <freifunk@geierb.de>
[added comment about GPIO]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-11-03 13:59:18 +01:00
Sebastian Kemper
1f0063b58c rules.mk: remove "$(STAGING_DIR)/include"
"$(STAGING_DIR)/include" was carried over from buildroot-ng to OpenWrt
in commit 60c1f0f64d. buildroot has
dropped this directory a long time ago.

In OpenWrt the directory is still created by the PrepareStaging macro
and is part of the default TARGET_CPPFLAGS. But nothing at all installs
headers into this directory, nor should anything be installed under this
path.

Removing this directory from TARGET_CPPFLAGS will cut down the log noise
a bit. Not only will CPPFLAGS be shorter, there will be less warnings
set off by "-Wmissing-include-dirs" (or even failures when paired with
"-Werror"). After all the directory does not even _exist_ in the SDKs,
which are used on the build bots when building packages (see [1] and
[2]).

make[8]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-aarch64_generic_musl/libmbim-1.20.0/src/common'
  CC       libmbim_common_la-mbim-common.lo
cc1: error: /builder/shared-workdir/build/sdk/staging_dir/target-aarch64_generic_musl/include: No such file or directory [-Werror=missing-include-dirs]
cc1: all warnings being treated as errors

[1] https://github.com/openwrt/packages/issues/10377
[2] https://github.com/openwrt/packages/pull/10378

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: Rosen Penev <rosenp@gmail.com>
2019-11-02 20:51:56 +01:00
André Valentin
6ae7ee7724 tools/mkrasimage: Add support for 128k header size
128k header size support is needed for ZyXEL NBG6716.

Signed-off-by: André Valentin <avalentin@marcant.net>
2019-10-27 13:38:05 +01:00
Yousong Zhou
ed6ba2801c tools: keep stamp file in $(STAGING_DIR_HOST)
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-10-24 11:34:34 +00:00
Adrian Schmutzler
c79b796280 ar71xx: improve support for TP-Link CPE510 v2
This fixes commit bae927c551 ("ar71xx: add support for TP-LINK CPE510
V2.0") where the support for this device wasn't optimal.

Device support for the CPE510v2 so far has been a hack to enable
flashing with CPE510v1 images. Those even have different hardware (e.g.
additional ethernet port).

With this patch, we provide proper support for this device in ar71xx.

Installation:
- Flash factory image through stock firmware WEB UI or through TFTP
- To get to TFTP recovery just hold reset button while powering on
  for around 4-5 seconds and release.
- Rename factory image to recovery.bin
- Stock TFTP server IP: 192.168.0.100
- Stock device TFTP address: 192.168.0.254

Fixes: bae927c551 ("ar71xx: add support for TP-LINK CPE510 V2.0")
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[Rebased onto revert commit, changed comments in mach-cpe510.c,
changed commit title and description, fixed eth0 MAC address,
removed eth1 initialization]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[squashed revert, added fixes tag]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-10-21 21:54:01 +02:00
Ilya Gordeev
5daf094353 tplink-safeloader: fix compilation warnings
Signed-off-by: Ilya Gordeev <Mirraz@users.noreply.github.com>
2019-10-19 13:16:57 +02:00
Josef Schlehofer
700e7a2eb9 tools/e2fsprogs: Update to version 1.45.4
Fixes CVE-2019-5094

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2019-10-08 21:51:08 +02:00
Josef Schlehofer
b4af2c689f expat: Update to version 2.2.9
Fixes CVE-2019-15903

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2019-10-06 21:28:49 +02:00
DENG Qingfang
cb289777ca ccache: update to 3.7.4
Update ccache to 3.7.4

Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_4

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-09-26 22:15:25 +02:00
Felix Fietkau
0f7ff74cbf tools/coreutils: install "touch"
Fixes error in setting SOURCE_DATE_EPOCH timestamp on files on rootfs prepare
on non-Linux systems

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-25 10:19:24 +02:00
Petr Štetiar
60eb0e8da2 scons: move to packages feed
This patch removes scons host build tool, as commit 7087efd72a8d
("scons: move host build tool to a proper place") in the packages feed
has moved scons into the new home.

There are currently no packages in the master tree which would need
scons, yet scons is build always as part of host tools, just in order to
satisfy host build dependency of few packages in the packages feeds.

Ref: https://github.com/openwrt/packages/pull/9584
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-09-15 22:53:01 +02:00
Hauke Mehrtens
169152c8d1 tools/mkimage: Update U-Boot to version 2019.07
This updates the U-Boot which provides the host tools like mkimage to
version 2019.07.
The patches were cleaned up and it was checked if this still compiles
on Linux and FreeBSD.

CONFIG_FIT_SIGNATURE_MAX_SIZE is set to the default value.

The patch for libressl was merged upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-09-04 22:35:22 +02:00
Rosen Penev
ac31ec0f62 upslug2: Update to git repository
This has two improvements over the current version. An autotools fix and
application of the wrt350v2 patch.

Cleaned up Makefile as a result of makefiles being fixed.

Note that this package is not really used as it depends on orion, which is
classified as broken.

This is the last package that uses svn in the tree.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-09-03 11:56:47 +02:00
Jo-Philipp Wich
f3ab336d7c tools: libelf: fix headers to trigger -Wundef warnings
When libelf from tools/ is used for building the kernel, compilation
aborts due to access to undefined defines since Kbuild adds -Wundef
to the compiler flags.

Patch the header files to use `#if defined(...)` instead of `#if ...`
to prevent such issues.

Ref: https://github.com/NixOS/nixpkgs/issues/59929
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-03 10:44:21 +02:00
Jo-Philipp Wich
d3f86c9cc3 tools: libelf: install pkg-config file
Install the pkg-config definition for libelf in order to allow the
kernel build process discover it later on.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-09-03 10:44:21 +02:00
Daniel Engberg
413c68d120 tools/cmake: Update to 3.15.1
Update CMake to 3.15.1
Refresh patches
Remove inofficial fossies.org and replace with GitHub (link on official site)
Remove 150-C-feature-checks-Match-warnings-more-strictly.patch as it's
a no longer needed backport from upstream.
Disable ccache if GCC is 4.8, 4.9 or 5.X to avoid build failures.
Reference: https://github.com/openwrt/openwrt/pull/1929

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-09-01 18:38:05 +02:00
DENG Qingfang
08e274da9d tools/mtd-utils: update to 2.1.1
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-08-27 10:32:44 +02:00
Christian Lamparter
ac2f341036 make-ext4fs: update to HEAD of 2017-05-29 - eebda1
Update make-ext4fs to commit eebda1d55d9701ace2700d7ae461697fadf52d1f

git log --pretty=oneline --abbrev-commit 484903e4..eebda1d5

eebda1d make_ext4: Add strict prototypes.
bb9cf91 make_ext4fs: Remove off64_t in favor of standard off_t

Created with the help of the make-package-update-commit.sh script.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-08-24 23:18:12 +02:00
Daniel Engberg
234f7a9e5d tools/e2fsprogs: Update to 1.45.3
Update e2fsprogs to 1.45.3
Remove OpenBSD patch
Remove Darwin patch, neither macports or brew patches these files
Add patch to avoid crond detection on host OS

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-08-17 16:57:32 +02:00
Russell Senior
bcfd1d7685 tools/patch: apply upstream patch for cve-2019-13638
GNU patch through 2.7.6 is vulnerable to OS shell command injection that
can be exploited by opening a crafted patch file that contains an ed style

diff payload with shell metacharacters. The ed editor does not need to be
present on the vulnerable system. This is different from CVE-2018-1000156.

https://nvd.nist.gov/vuln/detail/CVE-2019-13638

Signed-off-by: Russell Senior <russell@personaltelco.net>
2019-08-13 10:00:10 +02:00
Russell Senior
166e626277 tools/scons: update scons to 3.1.1
This version bump includes a bunch of fixes and improvements, which
should fix gpsd build breakage in the package feeds.

Ref: https://github.com/SCons/scons/blob/master/src/CHANGES.txt
Signed-off-by: Russell Senior <russell@personaltelco.net>
[added missing commit description]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-08-13 09:49:50 +02:00
Adrian Schmutzler
854ab1b045 ath79: add support for TP-Link CPE220 v2
This seems to be identical to CPE210 v1 despite having removable
antennas.

Specifications:

    * SoC: Qualcomm Atheros AR9344 (560 MHz)
    * RAM: 64MB
    * Storage: 8 MB
    * Wireless: 2.4GHz N based built into SoC 2x2
    * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-08-07 18:04:03 +02:00
Adrian Schmutzler
8d83a4f545 tplink-safeloader: increase kernel partition for CPE/WBSx10v1
This is a preparation for ath79 support of the CPE210/CPE510 v1.
Kernel size is chosen equal to the latest update for CPE610 v1.

This also updates the partition size in ar71xx target, so code
remains consistent if someone looks up the device. Since CPE210,
CPE510, WBS210 and WBS510 (all v1) share the same partition
layout definition, and are on deprecated target anyway, this
changes them all at once.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-08-07 18:04:03 +02:00
Daniel Engberg
7270fdb62f expat: Update to 2.2.7
Update (lib)expat to 2.2.7

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-08-06 14:03:09 +02:00
Petr Štetiar
ea1acaf5a6 firmware-utils: uimage_padhdr: fix Coverity issue
Fixes following issue reported by Coverity scan:

 *** CID 1452085:  Security best practices violations  (TOCTOU)
 /tools/firmware-utils/src/uimage_padhdr.c: 100 in main()
 94
 95     	if (!infname || !outfname) {
 96     		usage(argv[0]);
 97     		exit(1);
 98     	}
 99
 >>>     CID 1452085:  Security best practices violations  (TOCTOU)
 >>>     Calling function "stat" to perform check on "infname".
 100     	if (stat(infname, &statbuf) < 0) {

Fixes: a1c6a316d2 ("ramips: add support for Fon FON2601")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-08-04 22:09:20 +02:00
DENG Qingfang
2caf747116 ccache: update to 3.7.2
Update ccache to 3.7.2

Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_2

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-08-04 13:53:05 +02:00
Russell Senior
995bcc5329 tools/patch: apply upstream patch for CVE-2019-13636
In GNU patch through 2.7.6, the following of symlinks is mishandled in
certain cases other than input files. This affects inp.c and util.c.

https://nvd.nist.gov/vuln/detail/CVE-2019-13636

Signed-off-by: Russell Senior <russell@personaltelco.net>
2019-07-30 10:16:16 +02:00
Daniel Golle
9437012b9e tools/mklibs: update to 0.1.44 and convert to Python 3
Since the switch to Python 3 build fails if CONFIG_USE_MKLIBS is set
("Strip unnecessary functions from libraries" in menuconfig) as
mklibs hasn't been converted to run on Python 3.

 * update to most recent upstream version which brings some
   reproducibility fixes
 * converted to Python 3 using 2to3
 * fixed mixed tab/spaces indentation
 * fixed use of string.* functions
 * some more minor fixes to make Python 3 happy

Fixes commit 19938c8de7 ("build: switch to Python 3")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-07-26 23:50:21 +02:00
NOGUCHI Hiroshi
a1c6a316d2 ramips: add support for Fon FON2601
FON2601 is a wireless router.

Specification:
- SoC: Mediatek MT7620A (580MHz)
- RAM: 128 MiB
- ROM: 16 MiB SPI Flash
- Wireless:
   for 11b/g/n (upto 300 Mbps):  MT7620A built-in WMAC
   for 11a/n/ac (upto 867 Mbps): MT7662E
- Ethernet LAN: 1 port, upto 100 Mbps
- Ethernet WAN: 1 port, upto 1000 Mbps
- USB: 1 port (USB 2.0 host)
- LEDs: 4 (all can be controlled by SoC's GPIO)
- buttons: 1 (Displayed as "WPS" on enclosure)
- serial port: 57600n8
 pins: Vcc(3.3V), Rx, Tx, GND
(left to right, viewed from outside of board)

Installation (only available via UART):
  1. download sysupgrade binary image by wget command
  2. write sysupgrade binary image to Flash
     command is:
       mtd write sysupgrade.bin firmware
  3. reboot

Important Notice:
  Only one button is displayed as "WPS" on enclosure.
  However, it is configured as "reset" (factory resetting feature).

Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
[removed unrelated openwrt-keyring revert, missing -Wall for uimage_padhdr]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Petr Štetiar
316c8b5503 tools/scons: switch to Python 3
Build tested on ath79 with following packages from packages feed which
build depends on scons. None of them build anymore as it seems, that the
SConscripts are written for Python2.

 * packages/net/iotivity (KO, doesn't build even with latest 1.3.1 release)

   SyntaxError: invalid syntax
    File "/openwrt/build_dir/target-mips_24kc_musl/iotivity-1.2.1/build_common/SConscript", line 40
      print "\nError: Current system (%s) isn't supported\n" % host

   LookupError: unknown encoding: string_escape:
    File "/home/petr/testing/openwrt/build_dir/target-mips_24kc_musl/iotivity-1.3.1/SConstruct", line 28:
      SConscript('build_common/SConscript')

 * packages/net/smartsnmpd (KO, seems dead, no commit since 2015):

   SyntaxError: Missing parentheses in call to 'print'
    File "/openwrt/build_dir/target-mips_24kc_musl/smartsnmpd-2014-08-13/SConstruct", line 156
      print "Can't find liblua or liblua5.1!"

 * packages/utils/gpsd (KO, doesn't build even with latest 3.18.1 release):

   AttributeError: 'list' object has no attribute 'keys':
     File "/openwrt/build_dir/target-mips_24kc_musl/gpsd-3.18.1/SConstruct", line 1758:
       all_manpages = list(base_manpages.keys()) + list(python_manpages.keys())

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Petr Štetiar
5989a75cc4 tools/b43-tools/b43-fwsquash: convert to Python 3 with 2-to-3
Let's convert the script to Python 3.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Hans Dedecker
1282a63027 tools: libressl: fix compilation for non-glibc clib (FS#2400)
Fixes compilaton issue for non glibc clibs :

libtool: compile:  gcc -DPACKAGE_NAME=\"libressl\" -DPACKAGE_TARNAME=\"libressl\" -DPACKAGE_VERSION=\"2.9.2\" "-DPACKAGE_STRING=\"libressl 2.9.2\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libressl\" -DVERSION=\"2.9.2\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SYMLINK=1 -DHAVE_ERR_H=1 -DHAVE_ASPRINTF=1 -DHAVE_MEMMEM=1 -DHAVE_STRLCAT=1 -DHAVE_STRLCPY=1 -DHAVE_STRNDUP=1 -DHAVE_STRNLEN=1 -DHAVE_STRSEP=1 -DHAVE_TIMEGM=1 -DHAVE_SYSLOG=1 -DHAVE_ACCEPT4=1 -DHAVE_PIPE2=1 -DHAVE_POLL=1 -DHAVE_SOCKETPAIR=1 -DHAVE_EXPLICIT_BZERO=1 -DHAVE_GETAUXVAL=1 -DHAVE_GETAUXVAL=1 -DHAVE_DL_ITERATE_PHDR=1 -DHAVE_CLOCK_GETTIME=1 -DHAVE_VA_COPY=1 -DHAS_GNU_WARNING_LONG=1 -DSIZEOF_TIME_T=8 -I. -I../include -I../include/compat -DLIBRESSL_INTERNAL -D__BEGIN_HIDDEN_DECLS= -D__END_HIDDEN_DECLS= -I../crypto/asn1 -I../crypto/bn -I../crypto/ec -I../crypto/ecdsa -I../crypto/evp -I../crypto/modes -I../crypto -I/builds/pantacor/pv-platforms/openwrt-base/openwrt/staging_dir/host/include -D_DEFAULT_SOURCE -D_BSD_SOURCE -D_POSIX_SOURCE -D_GNU_SOURCE -D__STRICT_ALIGNMENT -O2 -I/builds/pantacor/pv-platforms/openwrt-base/openwrt/staging_dir/host/include -fpic -Wall -std=gnu99 -fno-strict-aliasing -fno-strict-overflow -D_FORTIFY_SOURCE=2 -fstack-protector-strong -DHAVE_GNU_STACK -Wno-pointer-sign -MT compat/getprogname_linux.lo -MD -MP -MF compat/.deps/getprogname_linux.Tpo -c compat/getprogname_linux.c -o compat/getprogname_linux.o
compat/getprogname_linux.c: In function 'getprogname':
compat/getprogname_linux.c:32:2: error: #error "Cannot emulate getprogname"
 #error "Cannot emulate getprogname"
  ^~~~~

Reported-by: Anibal Portero <anibal.portero@pantacor.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-07-23 14:54:07 +02:00
Kevin Darbyshire-Bryant
8d6d227bb6 tools: libressl: fix build on MacOS
Making all in tests
depbase=`echo handshake_table.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\
	gcc -DPACKAGE_NAME=\"libressl\" -DPACKAGE_TARNAME=\"libressl\" -DPACKAGE_VERSION=\"2.9.2\" -DPACKAGE_STRING=\"libressl\ 2.9.2\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libressl\" -DVERSION=\"2.9.2\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SYMLINK=1 -DHAVE_ERR_H=1 -DHAVE_READPASSPHRASE_H=1 -DHAVE_ASPRINTF=1 -DHAVE_MEMMEM=1 -DHAVE_READPASSPHRASE=1 -DHAVE_STRLCAT=1 -DHAVE_STRLCPY=1 -DHAVE_STRNDUP=1 -DHAVE_STRNLEN=1 -DHAVE_STRSEP=1 -DHAVE_TIMEGM=1 -DHAVE_GETPROGNAME=1 -DHAVE_SYSLOG=1 -DHAVE_POLL=1 -DHAVE_SOCKETPAIR=1 -DHAVE_ARC4RANDOM=1 -DHAVE_ARC4RANDOM_BUF=1 -DHAVE_ARC4RANDOM_UNIFORM=1 -DHAVE_TIMINGSAFE_BCMP=1 -DHAVE_CLOCK_GETTIME=1 -DHAVE_VA_COPY=1 -DHAVE___VA_COPY=1 -DSIZEOF_TIME_T=8 -I.  -I../include -I../include/compat -DLIBRESSL_INTERNAL -D__BEGIN_HIDDEN_DECLS= -D__END_HIDDEN_DECLS= -I ../crypto/modes -I ../crypto/asn1 -I ../ssl -I ../tls -I ../apps/openssl -I ../apps/openssl/compat -D_PATH_SSL_CA_FILE=\"../apps/openssl/cert.pem\" -I/Users/kevin/wrt/staging_dir/host/include  -D__STRICT_ALIGNMENT  -O2 -I/Users/kevin/wrt/staging_dir/host/include  -fpic -Wall -std=gnu99 -fno-strict-aliasing  -fno-strict-overflow -D_FORTIFY_SOURCE=2 -fstack-protector-strong  -Qunused-arguments -Wno-pointer-sign -MT handshake_table.o -MD -MP -MF $depbase.Tpo -c -o handshake_table.o handshake_table.c &&\
	mv -f $depbase.Tpo $depbase.Po
make[4]: *** No rule to make target `/Users/kevin/wrt/build_dir/host/libressl-2.9.2/crypto/.libs/libcrypto_la-cpuid-macosx-x86_64.o', needed by `handshake_table'.  Stop.
make[3]: *** [all-recursive] Error 1

A similar error & clues from
e783d60473

"
LibreSSL 2.9.1 now has a test that requires libtls.a, however, when building a
shared library only build, the --disable-static flag is passed to libressl,
which prevents the building of libtls.a.

With libtls.a not being built, the following error occurs:
libressl-2.9.1/tls/.libs/libtls.a', needed by 'handshake_table'.  Stop.

There are three options to fix this:
1) Stick with autotools, and provide a patch that removes building anything in
   the tests folder.
2) Pass --enable-static to LIBRESSL_CONF_OPTS
3) Change the package type to cmake, as a cmake build does not have this issue."

It appears we cannot change to cmake because cmake has a dependency on
an ssl library.

Take option 1 and do not build the tests.

Also take the opportunity to remove man page building as well.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-07-22 17:06:04 +01:00
Roman Yeryomin
3f1e8c0131 tools: libressl: update to 2.9.2 version
To keep in sync with OpenSSL 1.1.x branch version options.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
2019-07-21 10:51:43 +02:00
Petr Štetiar
ff7909f69e firmware-utils: mkfwimage: fix build failure on macOS with gcc 9
Fixes following errors:

 src/mkfwimage.c:279:8: error: format specifies type 'long' but the argument has type 'off_t' (aka 'long long') [-Werror,-Wformat]
                      d->stats.st_size,
                     ^~~~~~~~~~~~~~~~
 src/mkfwimage.c:280:8: error: format specifies type 'long' but the argument has type 'long long' [-Werror,-Wformat]
                      d->partition_length - d->stats.st_size);
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 src/mkfwimage.c:378:6: error: format specifies type 'unsigned long' but the argument has type 'long long' [-Werror,-Wformat]
                      d->stats.st_size - d->partition_length);
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-19 23:04:23 +02:00
Petr Štetiar
04cb651376 firmware-utils: mkfwimage: fix more errors reported by gcc-6/7/9
src/mkfwimage.c:276:8: error: format '%lld' expects argument of type 'long long int', but argument 4 has type '__off_t' {aka 'const long int'} [-Werror=format=]
src/fw.h:71:36: error: format '%llu' expects argument of type 'long long unsigned int', but argument 6 has type '__off_t' {aka 'long int'} [-Werror=format=]
    inlined from 'main' at src/mkfwimage.c:543:12:
/string_fortified.h:106:10: error: '__builtin_strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Werror=stringop-truncation]
    inlined from 'write_part' at src/mkfwimage.c:235:2,
string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
    inlined from 'main' at src/mkfwimage.c:477:5:
string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]
    inlined from 'main' at src/mkfwimage.c:496:5:
string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 4096 equals destination size [-Werror=stringop-truncation]
    inlined from 'main' at src/mkfwimage.c:481:5:
string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 4096 equals destination size [-Werror=stringop-truncation]
    inlined from 'main' at src/mkfwimage.c:485:5:
string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]

Runtested on ath79 and UBNT Bullet M XW.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-19 22:11:15 +02:00
Kevin Darbyshire-Bryant
90b7dbf7d8 firmware-utils: mkfwimage: fix more errors
Fix 4 errors reported by gcc 9

3 mismatched format type errors
1 unused variable error

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-07-19 16:56:39 +01:00
Petr Štetiar
9401780c2c firmware-utils: mkfwimage: provide human readable error
While looking at the ath25 build breakage of 19.07 images today I've
encountered following error:

 mkfwimage -B XS5 -v [...] ath25-ubnt5-squashfs-sysupgrade.bin.new
 ERROR: Failed creating firmware layout description - error code: -2

Which is barely human readable and needs poking into the source code, so
this patch makes the error more verbose and usable by mere mortals.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-19 16:16:15 +02:00
Petr Štetiar
83e60f0df6 firmware-utils: mkfwimage: enable extra compiler checks and fix them
Let's enforce additional automatic checks enforced by the compiler in
order to catch possible errors during compilation.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-19 16:15:25 +02:00
Andrew Cameron
cad4132e00 ath79: add support for TP-Link CPE510-v2/v3
TP-Link CPE510-v2/v3 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344

Specifications:
 - Based on the same underlying hardware as the TP-Link CPE510
 - Power, LAN, and 4 green LEDs
 - 1 10/100Mbps Shielded Ethernet Port (Passive PoE in)
 - Built-in 13dBi 2x2 dual-polarized directional MIMO antenna
 - Adjustable transmission power from 0 to 23dBm/200mw

Flashing instructions:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[whitespace fixes]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-18 00:06:55 +02:00
Georgi Vlaev
8c51ddeff0 ramips: add support for TP-Link RE650 v1
TP-Link RE650 v1 is a dual-band AC2600 range extender,
based on MediaTek MT7621A and MT7615E. According to the
wikidevi entry for RE650 this device is identical with
TP-Link RE500 as hardware. This patch supports only RE650.

Hardware specification:

- SoC 880 MHz - MediaTek MT7621AT
- 128 MB of DDR3 RAM
- 16 MB - Winbond 25Q128FVSG
- 4T4R 2.4 GHz - MediaTek MT7615E
- 4T4R 5 GHz - MediaTek MT7615E
- 1x 1 Gbps Ethernet - MT7621AT integrated
- 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2))
- 4x buttons (Reset, Power, WPS, LED)
- UART header (J1) - 2:GND, 3:RX, 4:TX
  Serial console @ 57600,8n1

Flash instructions:

Upload
openwrt-ramips-mt7621-tplink_re650-v1-squashfs-factory.bin
from the RE650 web interface.

TFTP recovery to stock firmware:

Unfortunately, I can't find an easy way to recover the RE
without opening the device and using modified binaries. The
TFTP upload will only work if selected from u-boot, which
means you have to open the device and attach to the serial
console. The TFTP update procedure does *not* accept the
published vendor firmware binaries. However, it allows to
flash kernel + rootfs binaries, and this works if you have
a backup of the original contents of the flash. It's probably
possible to create special image out of the vendor binaries
and use that as recovery image.

Signed-off-by: Georgi Vlaev <georgi.vlaev@gmail.com>
[re-added variables for kernel header]
Signed-off-by: David Bauer <mail@david-bauer.net>
2019-07-17 23:14:23 +02:00
Daniel Engberg
6fac9077c6 tools/gengetopt: Update to 2.23
Update gengetopt to 2.23
Remove 100-dependency_fix.patch, fixed upstream
Rework no tests and docs patch
Fix typo in copyright section

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-07-08 16:42:26 +02:00
Andrew Cameron
d5a38725f8 ath79: increase kernel partition size for CPE610v1
Increase the Kernel partition to address the issue discussed here
https://forum.openwrt.org/t/cpe610-v1-sysupgrade-bin-missing-too-big/39637/5
Switch Back to the okli Loader to support increased partition size

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [add <> for e-mail]
2019-07-07 13:02:06 +02:00
Andrew Cameron
e15049c88b ath79: add support for TP-Link CPE610-v1
TP-Link CPE610-v1 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344

Specifications:
 - Based on the same underlying hardware as the TP-Link CPE510
 - Power, LAN, WLAN5G green LEDs
 - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector

Flashing instructions:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
2019-06-24 20:22:24 +02:00
Daniel Engberg
9fc03832bc tools/bison: Update to 3.4.1
Update bison to 3.4.1
Remove 010-intl-stub-compat.patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-06-22 10:23:56 +02:00
Deng Qingfang
0f4e65ec7b tools/ccache: update to 3.7.1
Update ccache to 3.7.1

Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_1

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-06-08 09:59:25 +02:00
Davide Fioravanti
d95dff162a firmware-utils: jcgimage: add support for 4MiB+ images
The first version of this script allowed just 4Mb factory images.
With this patch is possible to set the maximum size of the payload.

For an 8Mb flash, the corresponding maxsize is:
8 * 1024 * 1024 - 5 * 64 * 1024 = 8388608 - 327680 = 8060928

If the -m argument is not set, the default maximum size will be
used for backward compatibility.

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
2019-05-31 10:30:03 +02:00
Davide Fioravanti
1bbd524e84 firmware-utils: jcgimage: fix style and compiler warnings
Fixed some compilation warnings.

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
2019-05-31 10:30:03 +02:00
Hans Dedecker
33b81b5721 Revert "bc: update to 1.07.1"
This reverts commit 0111b86f1d as it
breaks on Linux distributions without ed support

./fix-libmath_h: line 1: ed: command not found

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-05-22 21:27:44 +02:00
Deng Qingfang
0111b86f1d bc: update to 1.07.1
Update bc to 1.07.1
Use GNU mirror

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-05-22 13:13:06 +02:00
Deng Qingfang
9ccb24c548 scons: update to 3.0.5
Update scons to 3.0.5

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-05-18 21:17:45 +02:00
Davide Fioravanti
c349cc5752 tools/firmware-utils: mktplinkfw2: add Qualcomm layouts
This commit adds the partition layout used by the TP-Link Archer D50
and probably by the TP-Link Archer D7 to mktplinkfw2.

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
2019-05-18 17:59:49 +02:00
Steve Glennon
6411eac5da ipq40xx: add factory image for EnGenius ENS620EXT
Extended  mksenaofw to support new "capwap" header structure.
This supports flashing from factory 3.0.0, 3.0.1, 3.1.0 and 3.5.5
firmware.

Note that the factory image format changes for 3.1 and later firmware,
and that the 3.1.0 and 3.5.5 Engenius firmware will refuse the
factory_30.bin file. Similarly, the 3.0.0 and 3.0.1 Engenius firmware
will refuse the factory_35.bin file.

Flashing from the Engenius 3.1.0 firmware with the factory_35.bin
firmware has not been tested, as 3.1.0 firmware (Engenius "middleFW")
is only intended as part of the upgrade path to 3.5.5 firmware.

Modified ipq40xx image Makefile to appropriately invoke mksenaofw
with new parameters to configure the capwap header.

Note that there is currently no method to return to factory firmware,
so this is a one-way street.

Path from factory 3.0.0 and 3.0.1 (EnGenius) software to OpenWrt is
to navigate to 192.168.1.1 on the stock firmware and navigate to the
firmware menu. Then copy the URL you have for that page, something like
http://192.168.1.1/cgi-bin/luci/;stok=12345abcdef/admin/system/flashops
and replace the trailing /admin/system/flashops with just /easyflashops

You should then be presented with a simple "Firmware Upgrade" page.
On that page, BE SURE TO CLEAR the "Keep Settings:" checkbox.

Choose the openwrt-ipq40xx-engenius_ens620ext-squashfs-factory_30.bin,
click "Upgrade" and on the following page select "Proceed".

Path from factory 3.5.5 (EnGenius) software to OpenWrt is simply to
use the stock firmware update menu. Choose the
openwrt-ipq40xx-engenius_ens620ext-squashfs-factory_35.bin and click
"Upload" and "Proceed".

The device should then flash the OpenWrt firmware and reboot. Note
that this resets the device to a default configuration with Wi-Fi
disabled, LAN1/PoE acting as a WAN port (running DHCP client) and LAN2
acting as a LAN port with a DHCP server on 192.168.1.x (AP is at
192.168.1.1)

Signed-off-by: Steve Glennon <s.glennon@cablelabs.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[sorry, for unfixing the 80-lines eyesores.]
2019-05-11 16:37:11 +02:00
Deng Qingfang
ed5409dbe9 tools/ccache: update to 3.7
Update ccache to 3.7

Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-04-29 08:54:53 +02:00
Tomasz Maciej Nowak
f0be038897 tools: cbootimage: depend on automake
Fix missing aclocal reported by buildbot.

Fixes: 8595bb0 ("tools: add cbootimage for tegra")
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-07 15:25:28 +02:00
Christian Lamparter
7f3facfce2 firmware-utils: fix nec-enc build on older architectures
This patch enable gnu99 mode for the nec-enc utility which
fixes the following build-breaking errors on some older
architectures.

nec-enc.c: In function ‘xor_data’:
nec-enc.c:34:2: error: ‘for’ loop initial declarations are only allowed in C99 or C11 mode
  for (int i = 0; i < len; i++) {
  ^~~
nec-enc.c:34:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
nec-enc.c: In function ‘main’:
nec-enc.c:101:3: error: ‘for’ loop initial declarations are only allowed in C99 or C11 mode
   for (int i = 0; i < n; i++) {
   ^~~

Spotted-By: Buildbot
Fixes: fac27643f0 ("firmware-utils: add nec-enc")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-04-06 20:29:35 +02:00
INAGAKI Hiroshi
fac27643f0 firmware-utils: add nec-enc
nec-enc provides firmware encoding/decoding with model specific key
for NEC devices.

known devices:

  - Aterm WF1200CR
  - Aterm WG1200CR
  - Aterm WG2600HS

usage:

  nec-enc -i infile -o outfile -k key

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[checkpatch fixes, marked usage as noreturn, added static function,
moved buf* from stack to the global data segment]
2019-04-06 19:14:06 +02:00
Rosen Penev
46dc4e206d tools/xz: Compile with PIC to fix linking errors
I made a similar change to this here:
https://github.com/openwrt/packages/pull/8159

However, it turns out this did not fix the problem as the problem has to
do with tools/xz and not the xz package. The error is the same and causes
linking errors as can be seen above.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-04-06 19:14:06 +02:00
Michael Gray
5198258d10 tools: tplink-safeloader: add C7v5 KR Support
The added entry originates from TP-Links latest Archer C7 v5 KR firmware.

Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
2019-04-06 19:14:06 +02:00
Tomasz Maciej Nowak
b874437644 tools: add cbootimage-configs for tegra
This provides board configuraion tables for various Tegra boards needed
by cbootimage tool to create flashable bootloader images.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-06 14:48:46 +02:00
Tomasz Maciej Nowak
8595bb0b17 tools: add cbootimage for tegra
Tegra BCT and bootable flash image generator/compiler

>From documentation:
This project provides a tool which compiles BCT (Boot Configuration
Table) images to place into the boot flash of a Tegra-based device.

The tool will either:

a) Compile a textual representation of a BCT into a binary image.

b) Generate an entire boot image from a previously compiled BCT and a
   bootloader binary.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-06 14:48:46 +02:00
Mario Schroen
5ec205d7ac ath79: Add support for TP-Link CPE210 v3
Specifications:

    * SoC: Qualcomm Atheros QCA9533 (650MHz)
    * RAM: 64MB
    * Storage: 8 MB SPI NOR
    * Wireless: 2.4GHz N based built into SoC 2x2
    * Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:
    Flash factory image through stock firmware WEB UI or TFTP
    To get to TFTP recovery just hold reset button while powering
    on for around 4-5 seconds and release.
    Rename factory image to recovery.bin
    Stock TFTP server IP:192.168.0.100
    Stock device TFTP adress:192.168.0.254

Thanks to robimarko for the work inside the ar71xx tree.
Thanks to adrianschmutzler for deep discussion and fixes.

Signed-off-by: Mario Schroen <m.schroen@web.de>
[Split into DTS/DTSI, read-only config partition in DTSI]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[renamed dtsi filename, light subject touches]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-04-02 02:10:59 +02:00
Adrian Schmutzler
a2a972b2cf ar71xx: Use dynamic partitions for TP-Link CPE210 v2
This is also helpful to add support in ath79.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-04-02 02:08:37 +02:00
Deng Qingfang
bfdf00977d tools/ccache: update to 3.6
Update ccache to 3.6

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-03-24 21:09:17 +01:00
Pawel Dembicki
1f149fcad3 firmware-utils: mkdlinkfw: add kernel image offset
Some boards with JBOOT have partiton between bootloader
and kernel image. This patch add possibility to change kernel
partition start address.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-03-24 01:44:24 +01:00
Stijn Tintel
d454035430 Revert "tools/cmake: Update to 3.14.0"
The cmake bump to 3.14.0 breaks build on all targets. Revert it for now.

This reverts commit a3446257a8.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-03-17 11:25:50 +01:00
Daniel Engberg
a56c21f582 tools/libelf: Add mirrors as main site is dead
Main site hasn't resolved for days so just add a few mirrors instead

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-03-17 10:22:36 +01:00
Daniel Engberg
a3446257a8 tools/cmake: Update to 3.14.0
Update CMake to 3.14.0
Refresh patches
Remove inofficial fossies.org and replace with GitHub (link on official site)
Remote 150-C-feature-checks-Match-warnings-more-strictly.patch as it's
a no longer needed backport from upstream.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-03-16 22:01:59 +01:00
Piotr Dymacz
db91418766 ath79: add support for TP-Link RE350K v1
TP-Link RE350K v1 (FCC ID: TE7RE350K) is a wall-plug AC1200 Wi-Fi range
extender with 'Kasa Smart' support. Device is based on Qualcomm/Atheros
QCA9558 + QCA9882 + AR8035 platform and is available only on US market.

Specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of flash (SPI NOR)
- 1x 1 Gbps Ethernet (AR8035)
- 2T2R 2.4 GHz (QCA9558), with ext. PA (SE2565T) and LNA (SKY65971-11)
- 2T2R 5 GHz (QCA9882), with ext. PA (SE5003L1-R) and LNA (SKY65981-11)
- 2x U.FL connector on PCB
- 2x dual-band PCB antennas
- 1x LED, 2x dual-color LED (all driven by GPIO)
- 3x button (app config, led, reset)
- 1x mechanical on/off slide switch
- 1x UART (4-pin, 2.54 mm pitch) header on PCB
- 1x JTAG (8-pin, 1.27 mm pitch) header on PCB

Flash instruction:
Use 'factory' image directly in vendor GUI (default IP: 192.168.0.254,
default credentials: admin/admin).

Warning:
This device does not include any kind of recovery mechanism in U-Boot.

Vendor firmware access:
You can access vendor firmware over serial (RX line requires jumper
resistor in R306 place, near XTAL) with: root/sohoadmin credentials.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-03-11 22:00:26 +01:00
Daniel Golle
a18d41996e tools: tar: update to version 1.32
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-03-10 21:36:28 +01:00
Moritz Warning
7fc4dd3611 cmake: match warnings more strictly in C++ feature checks
Require the word "warning" to appear at the start of a line, after
whitespace, or after a `:`.  This is the same that CTest launchers use
to match warnings.  It avoids matching "warning" inside file paths.
Fixed in cmake 3.14.0.

Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-03-10 17:48:23 +01:00
Felix Fietkau
fd8705e635 tools/mkimage: use http download server (fixes FS#2052)
Fixes timeouts with trying to access the FTP site.
Also remove mirror2.openwrt.org, which does not keep current tarballs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-07 13:28:30 +01:00
Felix Fietkau
068c4cf407 tools: squashfskit4 should only depend on coreutils on non-linux systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-03 20:58:52 +01:00
Alexander Couzens
ac3bae907f tools/squashfskit: fix version detection on non-linux system
gnu date is present in our staging_dir which means squashfskit will fail
to build. Prevent also a race condition if coreutils is build after
squashfskit.

To prevent a race condition, depend on coreutils.

Acked-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2019-03-03 19:45:10 +01:00
Alexander Couzens
889b6423b7
tools: migrate from squashfs4 to squashfskit4
squashfskit is a fork of the squashfs-tools.
squashfskit creates reproducible filesystems and includes
many of the distro patches.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: Paul Spooren <mail@aparcar.org>
2019-02-28 01:38:46 +01:00
Syrone Wong
7fb58b8f00 tools/isl: update to 0.20
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
2019-02-26 23:20:04 +01:00
Linus Walleij
c72b1d8468 gemini: Generate harddisk image for DNS-313
This makes OpenWrt build an Ext2+Ext4 partitioned image
for the D-Link DNS-313 with two blank partitions, a boot
partition on /dev/sda3 and a rootfs partition on
/dev/sda4.

This uses the methods already used in apm821xx including
the tricks to convert the generated Ext2 filesystem
partition to version 1 so that the firmware bootloader
will properly recognize it.

We patch a bit around the build files to make sure we
get the rootfs size set and that genext2fs is properly
built.

Tested on the D-Link DNS-313.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[Fixing and tricksing]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-20 18:51:31 +01:00
Linus Walleij
6cdf08f026 firmware-tools/ptgen: Allow generation 0 size partitions
The firmware on the D-Link DNS-313 NAS require two blank
partitions before the boot partition. Support this if
explicitly requested with a "-n" flag.

Tested on the D-Link DNS-313.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[Broken out from original patch]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-20 18:51:31 +01:00
Daniel Engberg
93034bf7f0 tools/mpfr: Update to 4.0.2
Update mpfr to 4.0.2
Use official site as last resort
Force thread-safety functionality
Refresh patches

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-02-10 20:51:09 +01:00
Daniel Engberg
a3383e4b01 tools/bison: Update to 3.3.2
Update bison to 3.3.2
Enable pthreads support
Refresh patches

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-02-10 20:49:56 +01:00
Daniel Engberg
a3df068b31 tools/sed: Update to 4.7
Update sed to 4.7
Enable pthreads support

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-02-10 20:48:25 +01:00
Daniel Engberg
1d1dabdf0a tools/tar: Update to 1.31
Update tar to 1.31
Fixes CVE-2018-20482
Switch to tar.xz tarball
Refresh patches

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-02-10 20:47:58 +01:00
Skirmantas Lauzikas
9c01273e5e ath79: add support for TP-Link Archer C2 V3 (AC900)
This commit adds support for the TP-link Archer C2 V3 (AC900).

Specifications:

 - CPU: QCA9563 750Mhz
 - Ram: 64MB (DDR2)
 - Flash: 8MB (SPI NOR)
 - Ethernet: 5x 10/100/1000
 - Wifi: QCA9563 bgn + QCA9887 an+ac
 - 9x Leds, 2x buttons

Flash instructions:

Upload openwrt-ath79-generic-tplink_archer-c2-v3-squashfs-factory.bin
via the router Web interface and flash as normal firmware update.

Signed-off-by: Skirmantas Lauzikas <skirmantas.lauzikas@blackraven.lt>
[reorder entries, fix trailing whitespace in dts, add firmware partition
 compatible string, remove led default off states, use default on state
 for system led, reuse tplink-safeloader-uimage image build recipe, squash
 with dynamic partitioning commit, reword commit message, add
 installation instructions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-27 16:41:10 +01:00
Skirmantas Lauzikas
30f48fb107 firmware-utils: tplink-safeloader: Fix for Archer C2 V3 image generation
Fix for factory image generation, so that stock firmware will accept the
openwrt image.

Ref: https://forum.openwrt.org/t/support-for-tp-link-archer-c2-v3/15617/17
Signed-off-by: Skirmantas Lauzikas <skirmantas.lauzikas@blackraven.lt>
[reword commit message, use correct order for conditions,
 trim trailing whitespace]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-27 16:41:05 +01:00
Michael Gray
963a83d82b tools: tplink-safeloader: add C7v5 RU Support
The added entry originates from TP-Links latest Archer C7 v5 RU firmware.

Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
2019-01-27 11:52:24 +01:00
David Bauer
36a091cb07 tools: mktplinkfw2: add split-uboot layout
This commit adds the split-uboot partition layout used by the
Archer C50 v4 to mktplinkfw2.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-26 21:46:32 +01:00
Kuang Rufan
eb31562370 tools/sed: fix incorrect dependency.
sed shall depend on xz instead of xz depends on sed.

Signed-off-by: Kuang Rufan <master@a1983.com.cn>
2019-01-22 11:28:49 +01:00
Mathias Kresin
26a016731d firmware-utils: mksercommfw: overhaul image creation
Move the zip compression into a build recipe. Pad the image using the
existing build recipes as well to remove duplicate functionality

Change the code to append header and footer in two steps. Allow to use a
fixed filename as the netgear update image does.

Use a fixed timestamp within the zip archive to make the images
reproducible.

Due to the changes we are now compatible to the gnu89 c standard used by
default on the buildbots and we don't need to force a more recent
standard anymore.

Beside all changes, the footer still looks wrong in compare to the
netgear update image.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-15 19:11:54 +01:00
Mathias Kresin
18c9faa032 tools: zip: add option for reproducible archives
Add the option -mt/--mtime to pass a timestamp which is used as filedate
for the containing files.

So far, it isn't used for anything written to the extra fields,
therefore requires the -X (eXclude eXtra file attributes) parameter to
be effective.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-15 19:11:53 +01:00
Mathias Kresin
ad8c2d6099 tools: add zip utility
One image requires a zip compressed image, so add the zip util found in
the packages feed, and extend it with some useful debian patches.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-15 19:11:53 +01:00
Mathias Kresin
01e95dc0dc firmware-utils: mkdlinkfw: fix build
While we don't need the gnu99 option anymore, we still need to force the
c99 standard to fix the following build error on the build bots:

src/mkdlinkfw.c: In function 'find_auh_headers':
src/mkdlinkfw.c:267:3: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
   for (int i = 0; i < header_counter; i++) {
   ^
src/mkdlinkfw.c:267:3: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-13 19:28:54 +01:00
Mathias Kresin
0e78af22d9 firmware-utils: mkdlinkfw: fix error handling
fread() doesn't set errno, ferror need to be used to check for errors.
While at it, check if we read the expect number of elements.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-13 18:31:10 +01:00
Mathias Kresin
e428b127e7 firmware-utils: mkdlinkfw: create reproducible header
Use the SOURCE_DATE_EPOCH environment variable if set instead of the
current time. The used timestamp matches the timestamp of the latest
commit this way and make the images reproducible.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-13 18:31:10 +01:00
Mathias Kresin
f4aa9d8839 firmware-utils: mkdlinkfw: cleanup code
Drop unused function and macros. With the cleanup the gnu extension
typeof isn't used any longer and the gnu99 compile flag can be dropped.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-13 18:31:10 +01:00
Hans Dedecker
e42a227ee3 tools/firmware-utils: fix sysupgrade typo in mkdapimg2
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-12 19:47:25 +01:00
Hans Dedecker
7197115c25 tools/firmware-utils: fix sysupgrade typo in mkdapimg
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-12 19:44:35 +01:00
Egor Mikhaylov
ff62e83211 bison: update to 3.2.4
Signed-off-by: Egor Mikhaylov <nagakamira@gmail.com>
2019-01-07 22:08:44 +01:00
Georgi Vlaev
d03aae1a09 ath79: add support for TP-Link Archer C6 v2
This patch adds support for TP-Link Archer C6 v2 (EU)

Hardware specification:
- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q64CSIG (8MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: There's no UART header on the board

Flash instructions:

Upload
openwrt-ath79-generic-tplink_archer-c6-v2-squashfs-factory.bin
via the router Web interface.

Flash instruction using tftp recovery:

1. Connect the computer to one of the LAN ports of the router
2. Set the computer IP to 192.168.0.66
3. Start a tftp server with the OpenWrt factory image in the
   tftp root directory renamed to ArcherC6v2_tp_recovery.bin.
4. Connect power cable to router, press and hold the reset
   button and turn the router on
5. Keep the reset button pressed until the WPS LED lights up
6. Wait ~150 seconds to complete flashing

According to the GPL source the non-EU variant has different
GPIOs assigned to some of the LEDs and buttons. The flash
layout might be different as well. The wikidevi entry for
Archer A6/C6 assumes they are identical.

Signed-off-by: Georgi Vlaev <georgi.vlaev@gmail.com>
2018-12-31 16:25:11 +01:00
Hans Dedecker
77429a820f tools/cmake: update to 3.13.2
Update to the latest stable version and refresh patches; see
https://cmake.org/cmake/help/v3.13/release/3.13.html for the latest
changes in 3.13.x

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-12-29 18:12:28 +01:00
Daniel Engberg
5f978eec18 tools/e2fsprogs: Update to 1.44.5
Update e2fsprogs to 1.44.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-12-27 13:47:50 +01:00
INAGAKI Hiroshi
9145f5209f firmware-utils: add hex pattern mode for xorimage
This commit adds "hex pattern mode" to xorimage. This mode allows xor
with a hexadecimal pattern that cannot be expressed with ASCII
charactors.

usage (example):
  xorimage -i firmware.bin -o firmware.bin.new -p 6A57190601121E4C -x

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (fix checkpatch)
2018-12-24 19:18:07 +01:00
Daniel Engberg
666dd5dc01 tools/mtools: Update to 4.0.23
Update mtools to 4.0.23
Drop patch, workaround in upstream

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-12-24 17:05:57 +01:00
Kevin Darbyshire-Bryant
99ddff0c7f tools: Update endian definitions for Mac OSX
- it appears (at least from OS X verison 10.10, Yosemite) that the
    big and little endian defintions have changed.

    the older

       #include <sys/_endian.h>
       #include <architecture/byte_order.h>

    reference yielded the following warning:

         #define __bswap_16(x)      NXSwapShort(x)
                                    ^
       /usr/include/architecture/byte_order.h:45:1: note: 'NXSwapShort' has been explicitly marked deprecated here

    For the new OS X editions, it seems that we need to refer to:

      #include <netinet/in.h>
      #include <libkern/OSByteOrder.h>

    and respectively use 'OSSwapInt16', 'OSSwapInt32', & 'OSSwapInt64', in
    place of 'NXSwapShort', 'NXSwapLong' & 'NXSwapLongLong'.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-12-19 15:08:30 +00:00
Karl-Felix Glatzer
1e4ee63cc8 ath79: add support for TP-Link Archer A7
This patch adds support for TP-Link Archer A7

Specification:
- SOC: QCA9563
- Flash: 16 MiB (SPI)
- RAM: 128 MiB (DDR2)
- Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) SoC internal
  - 5GHz (ac) QCA988x
- USB: 1x USB 2.0 port
- Button: 1x power, 1x reset, 1x wps
- LED: 10x LEDs
- UART: holes in PCB
  - Vcc, GND, RX, TX from ethernet port side
  - 115200n8

Flash instructions:

Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin
via the Webinterface.

Flash instruction using tftp recovery:

1. Connect the computer to one of the LAN ports of the Archer A7
2. Set the computer IP to 192.168.0.66
3. Start a tftp server with the OpenWrt factory image in the tftp
   root directory renamed to ArcherC7v5_tp_recovery.bin
2. Connect power cable to Archer A7, press and hold the reset button
   and turn the router on
3. Keep the reset button pressed for ~5 seconds
4. Wait ~150 seconds to complete flashing

Changes since first revision:

  - Flash instructions using stock image webinterface
  - Changed "Version 5" in model string to "v5"
  - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi
    and qca9563_tplink_archer-a7-v5.dts
  - Firmware image is now build with dynamic partitioning
  - Default to ath10k-ct

Changes since second revision:
  - Changed uboot@0 to uboot@20000 in DTS file
  - Fixed ordering issue in board led script
  - Specify firmware partition format in DTS file
  - Rebased Makefile device definition on common
    Device/tplink-safeloader-uimage definition
  - Merged switch section in network script
    (same configuration as tplink,tl-wdr3600
    and tplink,tl-wdr4300)

Signed-off-by: Karl-Felix Glatzer <karl.glatzer@gmx.de>
2018-12-17 08:09:13 +01:00
Hauke Mehrtens
02324da206 tools/sdimage: Fix build with host Linux headers < 3.18
The ufb tool needs the host UAPI Linux headers from kernel 3.18
or later, remove it for now as it is not used anyway.

Fixes: 4bf5c4395b ("tools/sdimage: update to latest git version")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 14:03:35 +01:00
Michael Heimpold
4bf5c4395b tools/sdimage: update to latest git version
This includes code cleanups and fixes some portability issues,
compiler warnings about printf arguments etc.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-12-16 00:57:20 +01:00
Mathias Kresin
262b885b83 ramips: use new image build code for D-Link DCS-930 family
Drop the factory images and the firmware tool to create them. They don't
work any more, since the factory image has an uImage header covering the
whole kernel + rootfs. This way the uImage splitter will not be able to
find the rootfs and the kernel will panic later on.

The factory images were most likely added at a time the board had
distinct partitions for kernel and rootfs.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-12 11:01:59 +01:00
Daniel Engberg
731a12ad83 tools/bison: Update to 3.2.2
Update bison to 3.2.2

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-11-27 10:28:28 +01:00
Rosen Penev
7ef38e42c8 flex: Add a lex symlink
Some packages like libpfring assume the presense of lex, which on some
other systems is a symlink to flex but not all. Symlink flex to fix
compilation.

Arch Linux and Fedora do this as far as I know.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-11-25 19:23:03 +01:00
David Bauer
53020ed4b9 tools: tplink-safeloader: add C7v5 EU SupportList
Currently flash from WebIF is broken for Archer C7 v5 EU models as their
SupportList entries are missing.

The added entries originate from TP-Links latest Archer C7 v5 EU
firmware.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-11-23 21:22:51 +00:00
Hans Dedecker
80526d2fed bison: update to 3.2.1
Chnages since 3.2:

b590ad02 version 3.2.1
05e70adf build: fix issues in the generated tarball
7efe0b5d build: fix typo
351e3630 NEWS: update
4fd1fc70 examples: ship them
e02ce4c7 build: minor fixes in doc/
7cab285e CI: maximize chances of errors sooner
86efe282 c++: improve the generated documentation
cf1446dc tests: don't fail if the C++ compiler does not work
e93c40b3 tests: don't disable C++ warnings in C files
eff67391 c++: workaround portability issue
5a0d7802 tests: work around getopt portability issues
f1e0839c doc: -Wzero-as-null-pointer-constant was added to GCC 4.7
3bf429ae examples: #include <cstring> in calc++
f8cadc73 c: provide a definition of _Noreturn that works for C++
bd7aebb8 c: update the definition of _Noreturn
ca8039e6 tests: don't expect the shell to support 'local'
5d07f4f7 bitset: fix warning
e605ad96 build: fix use of gnulib Make variables
50fac71d maint: post-release administrivia

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-15 11:45:25 +01:00
Ted Hess
042d68a195 tools/pkg-config: Handle variable substitution of 'bindir' to redirect to STAGING_DIR/bin
Signed-off-by: Ted Hess <thess@kitschensync.net>
2018-11-13 15:40:30 -05:00
Daniel Engberg
04f4dd6fa2 tools/cmake: Update to 3.12.4
Update cmake to 3.12.4

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-11-12 12:04:38 +01:00
Kevin Darbyshire-Bryant
1a73b2d089 tools: firmware-utils: mksercommfw build on Darwin
asm/byteorder.h & hence __cpu_to_be32() doesn't exist on Darwin

Shamelessly copy some byte swap functions from oseama.c

Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-11-09 13:27:03 +00:00
Koen Vandeputte
b4e17a7440 ramips: fix netgear r6120 factory image generation
as indicated in commit c5bf408ed6 "(ramips: fix image generation for mt76x8")
more rework was needed to fix the other issues.

Building on another machine, but using the same arch, showed
the application failing again for different reasons.

Fix this by completely rewriting the application, fixing following found issues:

- buffer overflows, resulting in stack corruption
- flaws in memory requirement calculations (too small, too large)
- memory leaks
- missing bounds checking on string handling
- non-reproducable images, by using unitilized memory in checksum calculation
- missing error handling, resulting in succes on specific image errors
- endianness errors when building on BE machines
- various minor build warnings
- documentation did not match the code actions (header item locations)
- allowing input to be decimal, hex or octal now

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-08 13:32:22 +01:00
Koen Vandeputte
c5bf408ed6 ramips: fix image generation for mt76x8
Buildbot fails to generate images for targets also generating a
Sercomm binary with following error:

Opening file: /mnt/ramdisk/koen/firmware/builds/owrt_mt76x8/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-netgear_r6120-squashfs-factory.img.rootfs.zip
Filesize: 3648606 .
mksercommfw: malloc.c:2427: sysmalloc: Assertion `(old_top == initial_top (av) && old_size == 0) || ((unsigned long) (old_size) >= MINSIZE && prev_inuse (old_top) && ((unsigned long) old_end & (pagesize - 1)) == 0)' failed.
Makefile:287: recipe for target '/mnt/ramdisk/koen/firmware/builds/owrt_mt76x8/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-netgear_r6120-squashfs-factory.img' failed

Debugging using valgrind shows stack corruption due to a buffer overflow.
The author of the generator assumes the filename ends with "root",
while it should be "rootfs".

Fix this by accounting for the 2 missing characters which solves the build issues.

More work is required to cleanup this source, which will be done later on.

Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 15:29:51 +01:00
Hannu Nyman
f1ed7747bb tools/bison: update to version 3.2
Update bison to version 3.2

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-11-05 14:04:26 +01:00
Rosen Penev
32fc41baab tools/patch: Add fedora patch for crashing git style patches
https://lists.gnu.org/archive/html/bug-patch/2018-10/msg00000.html

I assume a CVE number will be assigned soon.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-11-01 17:16:52 +01:00